That could be a problem with the Bluetooth headset battery. It is recommended to contact the customer service hotline for consultation. Or try a new charger.
The light is off, which means the battery is full. The lights are always on during normal use. It's new. It's to be matched.
Just bought when it is virtual Logitech wireless headset can not be chargedElectricity , it is not very expensive to listen to music with Bluetooth, generally more than two hours are fully charged, and you can continue to listen to music when charging, fully charged to ensure that it can be used for more than 8 hours, that is, the volume is slightly smaller, the bass is not thick enough.
are micro usb interfaces, so universal, with a computer or socket can be charged. As for the battery problem, the new lithium batteries have basically eliminated the memory effect, so there is no need to wait until there is no power to charge, and how long it will not hurt the battery. It's best to use it once or twice before charging it.
In the headsetWhat is this original _ Baidu...
1, the reasons for this situation are: computer driver problems, computer USB interface problems, computer Settings and headset problems. Computer driver issues: Some computer drivers are incompatible with Logitech headsets. You can try updating your computer driver to the latest version to see if that fixes the problem. Computer USB interface problem: If the USB interface of the computer is faulty, the headset can not be powered on and recognized by the computer.
2, the possible reason is that the USB cable or plug and the internal contact of the headset is poor. USB modeWhen relying on the digital-to-analog conversion circuit inside the headset, the digital signal is converted to the analog signal required by the headset. If there is poor contact, the headset will disconnect the USB connection during the working process (even after plugging in the USB interface), resulting in computer recognition failure. Therefore, you need to restart the computer to re-identify. Logitech has released a new version of its Headset Pairing app, Headset 00.010. Logitech Headset Pairing for headset reception is poor, orUse if you need to re-pair after replacing the receiver. This program comes in handy if your wireless headphones happen to have a new receiver and need to be paired.
4, Logitech G430 headphones can hear their own voice when the microphone is turned on, which is usually due to the listening function of the microphone. To solve this problem, you can follow these steps: ** Check and turn off the Listening function ** : - If Logitech's drivers are already installed, you can find the "listen" or "listen" related option in the driver Settings and turn it off.
1. The battery is faulty. The battery may also be damaged due to too long use time Logitech wireless headphones can not be charged , which will cause the battery to overheat Logitech wireless headphones can not be charged , resulting in smoke. If it is a battery problem Logitech wireless headset can not be charged , it is recommended not to use the damaged battery, and replace the new battery as soon as possible. An internal fault occurs in the headset. Logitech G733 headphonesIt may be due to damage or failure of internal components resulting in short circuit or overheating, resulting in smoke from the charging of the headset. 2, wireless game headphones also have an annoying place, that is, the battery life is too short, sometimes there may be a power failure during the game, and the frequent charging operation is also very troublesome. The Logitech G733 gaming headset has 29 hours of ultra-long battery life, which can last for 29 hours after being fully charged, and you don't need to worry about the power problem when playing, saying goodbye to the tedious operation of frequent charging.
3. In actual use, the G733 uses the table while chargingIt works well, and the device lights can be synchronized through the G HUB, and the overall performance is satisfactory. Only the microphone driver Settings are slightly complex, the preset effect is general, and we look forward to improvements in the future. In general, Logitech G733 wireless headphones in performance and design have shown that Logitech wireless headphones can not be charged good strength, worth considering as a new partner on the desktop. However, we need to pay attention to the limitations of its drive, and hope that there will be optimization and upgrading in the future.
4, and play the game will not delay, play the game should choose the game headset! The battery life is also very goodA single charge can last almost a week, free the charger, start by owning it! Logitech G733 KDA wireless gaming headset Good Logitech G733 KDA wireless gaming headset appearance level is high, cool color also with streamer light belt, esports beautiful girls must.
5, the adapter needs electricity, find a charging bank to plug in, open the headset, Logitech wireless headset can not charge you can listen to the song. PS: Don't tell me you don't take a battery bank with you when you go out. However, there is a problem that has not been solved, the power consumption of the adapter is very low, and the general charging treasure is inLow current output will automatically shut down, so the adapter will soon be disconnected due to no power.
6, Logitech g733 earphones put automatic shutdown Logitech g733 earphones are wireless earphones, leading to the cause of automatic shutdown: battery problems, too long time to lead to insufficient power automatic shutdown.
1, are micro usb interface, so universal, with a computer or socket can be charged. As for the battery problem, it's new nowLithium-ion batteries have basically eliminated the memory effect, so there is no need to wait until there is no power to charge, and how long it will not hurt the battery. It's best to use it once or twice before charging it.
2, just bought when it is virtual electricity, it is not very expensive to feel when listening to music with Bluetooth, generally more than two hours are fully charged, and you can continue to listen to music when charging, fully charged to ensure that it can be used for more than 8 hours, that is, the volume is slightly smaller, the bass is not thick enough.
3, with the headset microphone power off, press and hold the Multifunction button for 9 seconds toPut it into pairing mode. The status indicator blinks green quickly in pairing mode. Note: To turn off the headset microphone, press and hold the Multifunction button for 3-4 seconds. The status indicator flashes red briefly and then goes off.