Personal feeling as long as the device is matched with the display of fast charge, like your wireless charge is Xiaomi and mobile phone match it shows fast charge, my phone with the charger plug on the display of fast charge 1 hour or so full, the charging treasure that fast port, do not show fast charge also an hour full, sometimes with the hotel's power display fast charge also takes nearly two hours.
The system of the mobile phone is faulty, thus causing a problem with the battery level display. This kind of problem is the easiest to solve, you can directly shut down and restart, which is equivalent toRefresh the data, the general power display will return to normal. The charger is faulty. So how to judge the charger is good or bad. It's actually very simple, try another charger. If it can be charged, it can be concluded that the charger is faulty. The phones themselves have quality problems.
If it is a Samsung mobile phone does not connect to the charger automatically prompt charging, recommended operation: restart the phone to try. Check the metal contact points between the battery and the phone for damage. Wipe the metal contact between the battery and the phone with a cotton cloth. Uninstall the recently installed third-party software. Back up data and restore factory Settings.
3, check the charging data cable plug and mobile phone charging tail plug, to see whether there is poor contact between the two. Check whether the mobile phone battery is normal (if this check is necessary, it is best to ask a professional teacher to test the mobile phone battery.) If the above checks are normal, then this situation may be, the charge control circuit on the motherboard, there is a hardware failure.
When the LED light status of the millet wireless charger and Millet wireless charger (universal fast charger) is green and blinking, the millet wireless charger is in the error and protection stage. nowNote whether there is a metal object placed on the wireless charger, please remove it and charge it again.
When the LED light status of the millet wireless charger and Millet wireless charger (universal fast charging version) is green and blinking, the millet wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again.
Plug the plugged data cable into the millet phone, then the normal indicationThe light is unresponsive or blinking. At this time, open the back cover and take out the battery, as shown in the figure (the data cable is still plugged in). If the screen displays a startup interface at this time, the charging is successful, and the battery can be charged normally, and the indicator light flashes slowly for normal charging. If not, remove the battery again, normally for one success, usually no more than three times can be successful.
First unlock the phone, find the Settings icon on the desktop, and turn it on. Once in the Settings page, select My Device options and click Enter. On the My Devices page that opens, click on the mobile system version on the left. In the open page, clickCheck the update button in the lower left corner to update the version to the latest version, in the latest version, only with the fast charging function.
When the mobile phone is charged using the secure encryption flash charge device, QCQCUSB-PD0/0 (PPS), the status bar will display the dual lightning fast charge icon to the right of the battery icon; If a secure encrypted flash charging device with charging power of 30W or above is plugged in to charge under the lock screen state, you can see a new charging animation and a rapid increase in the percentage of electricity.
Mobile phone system or application problem: If your mobile phone system is not the latest version, or the installed application conflicts with the fast charge function, it may also cause the fast charge to fail. Try to update your phone's systems and apps to the latest version, or uninstall recently installed apps that may conflict with charging. Hardware problem: If the above methods can not solve the problem, it may be the phone hardware failure.
iQOO can be charged but not fast enough, possibly because there is a problem with the charger, charging cable or the phone itself. Charger problem: iQOO phone needs to be usedThe charger that supports the fast charge protocol can achieve the fast charge function. If the charger used does not support iQOO's fast charge protocol, or the charger itself is faulty, then the iQOO phone will not be able to achieve fast charge.
The reasons for this brand of mobile phone suddenly can not be fast charged are as follows: iqoo mobile phone charger or charging cable is damaged. It is recommended to replace the charger or charging cable and make sure it matches the phone. iqoo mobile phone charging port has dust or debris. It is recommended to clean the charging port. There is a problem with iqoo mobile system. You are advised to upgrade the mobile phone system version. There was violent use. It is recommended to avoid violent use of mobile phones. Presence hardwareQuestion.
1. If the vivo mobile phone used fails to flash charge, you can refer to the following treatment methods: The flash charging icon is not displayed on the lock screen. Check whether to use a third-party theme (or a third-party lock screen style). Check whether to use a third-party theme or a third-party lock screen style.
2, if your phone supports fast charging but does not chargeThe display of the fast charge icon may be caused by the non-standard charger you are using or the abnormal connection of the data cable. If you do not use the standard charger, it is recommended that you use the product standard charger for charging.
3. If your device supports fast charge (or super fast charge) mode, but displays the common charge icon (or fast charge icon) during charging (1) It is recommended that you use Huawei's official charger and data cable. (2) Please check whether there is foreign matter or dirt in the interface. Please ensure that the charging interface is clean and the port connection is stable before charging the phone.
4, the phone is not displayedFlash charge enter Settings -- Check whether dual-engine flash charge is enabled in Battery/More Settings (Flash charge is enabled by default if this switch is not on;) Please confirm whether to use a third-party theme or lock screen style. These themes have their own effects and may not display the flash charging icon. You are advised to switch to the default theme.
5, according to the Zhongguancun online query, the mobile phone does not display fast charge mainly for the following reasons: Confirm whether the charger used supports fast charge technology. Although some chargers have the same shape, the output power may be different. If a low-power charger is used, the phone will not be able to support fast charging technology. check