Ensure that the inflator is powered before use. If it is too large, you need to use a battery clip. Then use the tire pressure monitor or the car's built-in monitoring system to measure the tire pressure to see if it needs to be inflated or deflated.
By this time, the preparation was complete. Insert the air outlet of the pump directly into the tire valve nozzle, and lock the pump lock when you hear the sound of a tire leak.
Finally, put the pump switch in the open position to inflate, so if you need to deflate, just press the pressure release button. It should be noted that the operation can be stopped as long as the inflation\/venting reaches the specified tire pressure value, which can be found in the car's owner's manual, the inside of the fuel tank cap, and the markings on the tire.
In addition, when using the inflator to inflate, if it has been used for more than 5 minutes, it must be stopped and allowed to dissipate heat, so as not to affect its service life due to overheating of the inflator.
：
1, before use should ensure that the power supply of the pump, if too large, you need to use the battery clamp;
2, and then use the tire pressure monitor or the car's own monitoring system to measure the tire pressure to see whether it needs to be inflated or deflated;
3. Insert the air outlet of the air pump directly into the tire air valve, and lock the lock of the air pump when you hear the sound of tire leakage;
4, put the switch of the air pump in the \"on\" position to inflate, if it is necessary to deflate, just press the pressure relief button. Air pump is also called air pump, air pump, through the operation of the motor to work, when the motor is pumping, the valve of the connecting device is opened by the air pressure of the atmosphere, the gas enters the air cylinder, and when the tire is pumped, the valve is closed by the air pressure in the air cylinder, the gas enters the tire
Connect the tire valve, align the pump nozzle with the tire valve, and tighten the nozzle in a clockwise direction.
Step 2: Connect the cigarette lighter and insert the 12v cigarette into the car cigarette lighter.
Step 3: Turn on the switch and press the product switch to " on" Position, start work. Press the switch to " after the specified tire pressure; The \"off\" position.
(If it is a QidUN digital display version can also adjust the tire pressure value through the preset tire pressure function button, when the adjusted tire pressure value will automatically stop inflating oh.)
Step 4: Unscrew the air nozzle and pull out the smoke plug. Unscrew the air nozzle of the air pump in the counterclockwise direction and pull out the smoke plug from the cigarette lighter.
Step 5: Store the wires and gas pipes.