中文English
无线充休眠hanxin360 2024-05-22 17:17 110
Walkie-talkie battery can not be charged:1, generally due to the incorrect charge and discharge use of the damage, the specific reason for the damage is the failure of a section or...

Why can't the walkie-talkie be charged when the battery and charger are all right?

05/22/2024 17:17:00无线充新闻

Walkie-talkie battery can not be charged:

1, generally due to the incorrect charge and discharge use of the damage, the specific reason for the damage is the failure of a section or several internal cells.

2, the use of time does not exceed the shelf life can directly find after-sales assistance.

3, common walkie-talkie batteries are nickel-cadmium batteries, nickel-metal hydride batteries and lithium batteries, under normal circumstances, these batteries can be charged 300-500 times, life in 12-20 months, if improper use, battery storage and maintenance is not done, the battery may not be charged, life is shortened.

4, intercom battery storage Lithium battery and nickel-metal hydride battery if long-term storage is not used, in the placement process will slowly continue to discharge, so it is easy to lead to a decrease in battery capacity or directly into the hibernation state, seriously affecting the battery life.

5, if the battery does need long-term storage, it is recommended that the battery live classification storage, lithium battery long-term storage requirements with more than 40% of the electricity, nickel-metal hydride battery long-term storage with electricity to reach about 80%.

< p >

My walkie-talkie battery is not charged, can it be repaired?

1, this machine uses a nickel-cadmium battery, generally due to incorrect charging and discharging use of the damage, the specific reason for the damage is the failure of a section or several internal cells.

2, you can disassemble several batteries, measure the battery voltage and short circuit current, and disassemble the battery with high voltage and large short circuit current into a battery that can be barely used for a while.

3, fundamentally solve this problem is the correct charge and discharge method, for nickel-cadmium batteries, must be completely exhausted and then charged, charging must be fully full.

4, it is recommended that you use Witex original smart charger, with the kind full of instructions, try not to use more than ten dollars of non-intelligent charger for a long time, the charger if not used correctly is very hurt the battery.