The Shimano 815 can be charged in two ways: via a power adapter or directly connected to the computer via a USB port.
< br >
1. Charging via power adapter:
< br >
Step 1: Prepare a power cord and adapter that comply with Shimano 815 power adapter.
< br >
Step 2: Connect one connector of the power cord to the adapter, and plug the other connector into the charging port of the Heimano 815.
< br >
Step 3: Plug the adapter into the power outlet and Shimano 815 will start charging. When charging, the charging indicator light on the Shimano 815 screen will light up, and the screen will show the progress of the battery charging.
< br >
Step 4: When the Shimano 815 charge indicator turns green, it indicates that charging is complete.
< br >
2. Directly connect the computer to charge via USB port:
< br >
Step 1: Get a Shimano 815 compliant USB cable.
< br >
Step 2: Plug one port of the USB cable into the Shimano 815 charging port and the other port into the USB port of the computer.
< br >
Step 3: Shimano 815 will automatically enter the charging state. When charging, the charging indicator light on the Shimano 815 screen will light up, and the screen will show the progress of the battery charging.
< br >
Step 4: When the Shimano 815 charge indicator turns green, it indicates that charging is complete. Note that charging via USB may be slower to charge and requires the computer to be on at all times.
Charge using the Type-C charging interface.
Because Shimano 8150 is a device that supports Type-C charging, using the Type-C charging interface can improve the charging rate and charging efficiency.
In addition, it is also necessary to pay attention to the advantages and disadvantages of choosing the appropriate charger and charging cable to ensure safe and fast charging.
Pay attention to the remaining level of battery power during each charge to avoid overcharging and excessive discharge.
The Shimano 8150 is a Bluetooth headset that charges as follows:
< br >
1. Use the included Micro USB cable to connect the headset to the power adapter or computer. Plug the Micro USB plug into the charging port on the bottom of the headset and connect the other end to the adapter or USB port on your computer.
< br >
2. After the wiring is connected correctly, the red LED indicator will light up and start blinking. This means the headset is charging.
< br >
3. When Shimano 8150 is fully charged, the red light will turn green and the flashing will stop. At this point, you can unplug the Micro USB cable.
< br >
4. Charging time usually does not exceed 2 hours. Before using the headset, make sure it is fully filled.
< br >
Note: When you use Shimano 8150, it is recommended not to charge it at the same time, as this may affect its functionality and performance.
The Shimano 8150 is a smart wristband that can be charged as follows:
1. Find the charging port on the back of the bracelet. The charging port is located at the bottom of the band and is usually covered by a plastic cover.
2. Gently remove the plastic cover of the charging port with your hand or other tools to expose the charging port.
3. Use the charger or USB cable delivered by the handy ring to connect the charging port of the bracelet, and plug the other end into the power supply or USB port of the computer.
4. After connecting the charger or USB cable, the bracelet will start to charge, and the charging status will be displayed on the bracelet screen when charging, which usually takes about 2 hours to charge.
5. After charging, disconnect the charger or USB cable and cover the plastic cover of the charging interface.
Shimano 8150 charging method is as follows:
Under normal circumstances, the new battery is charged for about 12 hours the first three times, and remember to exhaust the power. When recharging later, the prompt is full and recharging for one hour.
< br >
Full discharge, after the charge must be full. Three full charges and discharges and you're free. If you are using 220V AC to charge directly through the built-in transformer, it should be AC. If you are using the external charger to change the voltage and rectified direct current to charge, it should be DC
Shimano 8150 can be charged through the Type-C interface. You need to use the original charger or a Type-C charger that supports fast charging. Plug the charger into the Type-C interface to start charging.
It is recommended to use the original charger to ensure safe and fast charging.
When charging, you can use a mobile phone or other device to check the charging power and charging speed in order to grasp the charging status in time.
The Shimano 8150 can be charged via a USB port.
Because Shimano 8150 is designed with a portable wireless Bluetooth headset, in order to facilitate users to use it anytime and anywhere, it uses a USB port to charge, and users can use computers, charging banks and other devices to charge.
In addition, users can also choose to buy Shimano 8150 matching charger for charging, which can be more convenient and fast.
Use a power adapter to charge because the Shimano 8150 is a smartwatch and uses a rechargeable battery.
To charge, you need to use the accompanying power adapter, plug the adapter into the charger hole on the bottom of the watch, and then plug the adapter into the power outlet to charge.
The watch will display a charging state and automatically stop charging until it is fully charged.
In addition, the watch also supports wireless charging function, only need to put the watch on the charging platform that supports wireless charging can be wireless charging. It should be noted that during the charging process, the watch should not be in contact with water to avoid short circuit. At the same time, it should not be overcharged for a long time to avoid damaging the battery and the watch.
The Shimano 8150 is a magnetically levitated sphere speaker that is charged as follows:
< br >
1. Insert the charging cable into the Micro USB charging port on the rear of the speaker.
< br >
2. Plug the other end into a power adapter or USB port, plug the charger into a wall outlet, or plug the USB port into the USB port on your computer.
< br >
3. When the speaker is in the charging state, hear the prompt tone and observe the light status, and the LED light will light up. Red indicates charging process, green indicates charging completion.
< br >
4. The charging time is about 3-4 hours, and the charging power will be displayed in the LED indicator. When charging is complete, unplug the charger and charging cable.
< br >
It is important to note that before the first use, it is recommended to charge it for 4 hours to ensure that the battery is fully charged for the best audio experience. At the same time, it is also necessary to avoid overcharging and prevent damage to the battery.
Shimano 8150 can be charged by connecting a USB cable
Because the Shimano 8150 is equipped with a USB port, you can connect it to a device such as a computer by connecting a USB cable for charging, you need to ensure that the device has sufficient power supply during the charging process.
At the same time, you can also charge by connecting devices such as mobile phone chargers, but you need to pay attention to the output voltage and current of the charger to avoid damage to the device.
The Shimano 8150 is a wireless Bluetooth headset that can be charged as follows:
< br >
1. Place Shimano 8150 in the charging box and make sure that the charging box is charged or connected to the power supply.
< br >
2. Place the headset in the charging case in the correct direction.
< br >
3. Wait until you hear a click at the interface of the charging case to confirm that the earphone in the charging case has successfully touched the indicator light, and the corresponding earphone indicator light will light up.
< br >
4. After the headphone indicator lights up, wait about 40 minutes to be fully charged.
< br >
It should be noted that before the first use, it is recommended to fully charge the charging box, and make sure that the charging pins and sockets are not contaminated or loose. In addition, the Shimano 8150's charging case supports charging the headset at any time, and when the headset is put back in the charging case, the charging case will automatically detect to ensure that the headset maintains a high charge level at any time.
The Shimano 8150 is a smart wristband that can be charged as follows:
1. Remove the body of the wristband from the wristband strap;
2. Insert the bottom of the body of the bracelet into the charger base;
3. Insert the charger base into the power adapter or USB port of the computer;
4. Wait for the charging indicator to light up, indicating the start of charging.
The following points need to be noted when charging:
1. When charging, please ensure that the metal contacts of the charger base and the body of the bracelet are clean to ensure normal charging;
2. Do not forcibly remove or twist the body of the bracelet and the charger base during charging to avoid damaging the device;
3. Do not immerse the body of the bracelet and the charger base in water or exposed to wet environment during charging to avoid damage to the device.
The USB charging cable is plugged into the Di2 behind its display on the handlebars. At the same time, the variable speed and damping parameters can be adjusted. Achieve wireless connection front and rear dial. However, if you want to use overcharged battery power, it also supports wired connections.