中文English
无线充厚度hanxin360 2024-05-22 21:00 36
Glass 5 15A 5 is the specification of insulating glass, the 5 on both sides indicates that the thickness of the glass is 5㎜, and the 15 in the middle indicates that the thickness o...

How thick is 5 plus 5 insulating glass?

05/22/2024 21:00:53无线充新闻

Glass 5 15A 5 is the specification of insulating glass, the 5 on both sides indicates that the thickness of the glass is 5㎜, and the 15 in the middle indicates that the thickness of the aluminum bar sandwiched in the middle is 15㎜. Insulating glass is composed of two or more layers of flat glass. Two or more pieces of glass are bonded and sealed with a high strength and high air tightness composite binder around. Expansion data: Hollow glass can be used 3, 4, 5, 6, 8, 10, 12mm thick sheet glass, air layer thickness can be used 6, 9, 12mm interval. The heat conductivity of glass is 27 times that of air, and as long as the insulating glass is sealed, the insulating glass has the best insulation effect. There is a certain space between the glass and the glass of the insulating glass. The frame is filled with desiccant to ensure the dryness of the air between the glass sheets. The spacing between the two layers of insulating glass is generally 8mm.


Hello, 5 mm glass +9 mm hollow layer +5 mm glass

From the noise control point of view, the larger the air layer of insulating glass, the better the noise control effect. If the thickness of the air layer is less than 6mm, its insulation volume is only slightly higher than that of a single piece of glass of the same thickness. Under normal circumstances, the thickness of the insulating glass air layer is commonly used in two specifications: 9mm and 12mm; In special cases, it can be stretched to 20~100mm. I hope my answer can help you, thank you! Good luck to you!


5 plus 5 insulating glass is the thickness of 5 mm.

How is insulating glass made?

Is 2 or more pieces of glass sealed together, so that in the middle of the glass can form a static dry gas, also known as inert gas, and with a certain vacuum characteristics, and then the composite binder, to the glass sheet and itself contains desiccant aluminum alloy frame adhesion, due to this production process, coupled with many of the production molding, Therefore, the middle of the insulating glass is generally not water, not condensation, no stains, and has good thermal insulation and sound insulation.