Cabinet air conditioning is a more common type of air conditioning, with the increase of use time, it is easy to accumulate dust and dirt inside, affecting the use of air conditioning effect, but also affect people's health. The following describes the method of cleaning dust with cabinet air conditioning:
< br >
1. Power off the air conditioner and remove the air filter. Brush the air filter lightly with a soft brush, the direction of the brush should be consistent with the horizontal wire on the filter net, and the brush should not be too important to avoid damaging the air filter. Or wash the bottom of the filter faucet, which can clean the filter more thoroughly.
< br >
2. Turn on the outdoor unit of the air conditioner, gently remove the surface layer of the radiator, and remove the ash one by one. You can use a brush or a high-pressure blower to blow the ash.
< br >
3. Remove the top plate and two side panels of the indoor unit, locate the swing blades, and use a vacuum cleaner or a soft brush to remove the dust and dirt from the blades. Wipe the blades with a dry towel first, and then wipe with a wet wipe.
< br >
4. The vacuum cleaner can remove the hard disk and air outlet, and use its own hose brush to adsorb dust.
< br >
5. Install the air filter and door cover. After completion, you can start the test.
< br >
In short, the cabinet air conditioning cleaning dust needs to be careful and patient, regular cleaning helps to improve the operation of the air conditioning and people's comfort, but also to extend the service life of the air conditioning, if the air conditioning cleaning is more complex, it is recommended to seek professional help.
1. Turn off the power supply of the cabinet air conditioner.
< br >
2. Wipe the surface of the air conditioner with a soft brush or a clean cloth, and remove oil and stains from the air conditioner.
< br >
3. Open the screen cover of the air conditioner, and use a vacuum cleaner or brush to clean the dust from the filter, evaporator, and condenser inside the air conditioner.
< br >
4. Use clean water or detergent mixed with water to clean the filter, do not use hard objects such as brushes to scrub, so as to avoid damage.
< br >
5. Remove the air conditioner drainage tray to remove scale and debris.
< br >
6. Finally, tidy up all the cleaned parts, and remember to install the drainage tray, filter and other parts.
< br >
It should be noted that in the cleaning process, we must be particularly careful, careful operation, to avoid damage to electrical appliances, and to ensure their personal safety. If you are unsure about the cleaning method, please contact a professional to serve you.
The method of cleaning dust with cabinet air conditioner is as follows:
1. Power off the air conditioner: Before cleaning the air conditioner, power off the air conditioner to avoid electric shock accidents.
2. Remove the air conditioner panel: Open the air conditioner panel and remove the air filter and evaporator.
3. Clean with a soft brush: Gently clean the dust and debris on the evaporator and fan blades with a soft brush or a clean towel. Be careful not to clean with water.
4. Clean the air filter: clean the air filter with water to remove the dust and debris on it.
5. Reinstall the air filter and evaporator: Reinstall the cleaned air filter and evaporator in the air conditioner, paying attention to the installation position and direction.
6. Power test: Power test again after cleaning to ensure normal operation of air conditioning.
Things to pay attention to when cleaning the air conditioner:
1. Do not clean the evaporator and fan blades with wet towels or water to avoid short circuit or electric shock.
2. When cleaning the air filter, you can soak it in warm water and rub it with neutral detergent, but do not rub it hard to avoid damage to the filter.
3. If the air conditioner is dusty or has not been cleaned for a long time, it is recommended to ask professionals to clean it.
1. Turn off the air conditioner and unplug the air conditioner to avoid electric shock during cleaning.
2, first remove the air deflector, pull out the filter, clean the filter with water or vacuum cleaner.
If the filter is too dirty, soak the filter in decontamination agent or neutral soapy water for a while, then rinse the filter with running tap water, wipe off excess water slowly with a clean rag, and let dry in a ventilated place.
3, then determine the location of the heat sink:
The heat sink of the grille cabinet air conditioner can be found through the air outlet baffle or the air inlet baffle; Slide cover cabinet air conditioner, you need to open the air conditioner first, after the normal air outlet, through the outlet baffle to find.
4, the air conditioning special cleaning agent evenly sprayed on the heat sink, the foam completely covered the heat sink after standing for about 15 minutes;
5, finally, install the filter back to the cabinet air conditioning, and wipe the shell, open the air conditioning refrigeration mode, the sewage on the heat sink will be discharged with the drain pipe, run for half an hour.
Cabinet air conditioning dust cleaning methods are as follows:
1. Remove the shell and panel of the air conditioner according to the instructions, and take out the filter.
2, wet the parts to be cleaned with a watering can so that the foaming effect is better when cleaning.
3. Spray the air conditioner cleaning agent with a watering can on the cleaned filter net, and let it react for 5 to 8 minutes in order to thoroughly penetrate, decompose and remove the stains in the gap and surface of the filter net.
4. Scrape the foam on the surface of the filter with a scraper.
5, steam spray cleaning machine for high temperature sterilization, disinfection, decomposition of oil stains after cleaning the filter.
6, use air conditioning cleaning machine to clean the filter with water.
7. Air dry the filter and install it back.
Turn off the power
< br >
Close the main power socket of the cabinet air conditioner room unit. For safety reasons, it is best to unplug the socket directly, which can avoid electric shock, leakage and other bad accidents during the cleaning process.
< br >
Dust off
< br >
The use of cleaning tools to clean the dust of the air conditioner comprehensively, so as to avoid adverse effects on the air conditioner cleaning agent. And dispose of their garbage.
< br >
Cleaning inside
< br >
Use the screwdriver to loosen the screw of the air conditioner, and first remove the panel of the cabinet, find the evaporator of the air conditioner, spray the special air conditioner cleaning agent evenly on the air conditioner evaporator, if there is a heavy dirt on the evaporator fin, then remove it with a soft brush. Remove the small tube attached to the detergent bottle, insert it into the nozzle, and spray evenly from left to right back and forth to the aluminum heat transfer sheet and coil surface on the fin of the evaporator to ensure that the cleaning foam completely covers the surface of the evaporator. Then cover the panel and let sit for about 10 minutes. After cleaning, reinstall the dust filter screen, and cover the air conditioner shell, and then gently wipe the air conditioner panel with a soft cloth dipped in warm water, do not use too much force, so as not to damage the coating on the panel.
When cleaning the air conditioner, the first step is to pull out the power socket of the air conditioner, so as to ensure the safety of air conditioning cleaning and effectively avoid the occurrence of contact.
two
Before cleaning the air conditioner, we can first clean up some dust on the surface of the air conditioner, at this time you can use a wet towel to wipe the surface of the air conditioner, and pay attention to the cleaning of the dead corner of the air conditioner when cleaning.
three
After the air conditioning surface is clean, you can open the air conditioning panel. When taking out the air conditioning filter of the cabinet machine, the filter net
1. Close the main power socket of the cabinet air conditioner room unit;
2. Use cleaning tools to clean the dust of the air conditioner comprehensively, so as to avoid adverse effects on the air conditioner cleaning agent;
4. Turn on the air conditioner and adjust the air volume and cooling capacity to the maximum. Keep the air conditioner on for 20 minutes