Because there is often dust or other debris in the air, some of these dust or debris will fall on the outer surface of the condenser fins, which will worsen the heat dissipation effect of the condenser, especially in places where the environment is harsh, therefore, we should clean regularly.
< br >
The cleaning method for the condenser of the air cooler is: simple dust can be washed with compressed air, etc., and can also be vacuumed with a vacuum cleaner. If there is more dirt on the finned condenser, the heat pipe and fin can be cleaned by gasoline or non-corrosive cleaning agent to improve the heat dissipation effect.
< br >
Water-cooled condenser is mainly used for water-cooled chiller, for this condenser, mainly to remove scale problem. Its cleaning cycle is generally based on water quality, if the water quality is poor landscape, deep well water, at least once a year to clean, if the water quality is good, such as pure water, you can clean once every 2 to 3 years.
< br >
There may also be some chiller with a tube type water-cooled condenser, which can be pickled. The operation method is: remove the condenser, release the water inside, and then inject 10% dilute sulfuric acid solution into the tube of the condenser until the water outlet has a solution. Dilute sulfuric acid can be released after staying in the condenser for 20 to 30 minutes, this action is repeated two or three times, and finally install the connection pipe of the cooling water pipe and the condenser, open the cooling water valve and rinse for 10 to 20 minutes, and the anti-scaling and cleaning work is finished.