中文English
无线充拆卸hanxin360 2024-05-22 20:22 40
First of all, the roller curtain is received in the rotating shaft, and then open the upper beam on the left side of the disassembly of the small bay, remove the upper and lower be...

How to disassemble electric roller curtain?

05/22/2024 20:22:25无线充新闻

First of all, the roller curtain is received in the rotating shaft, and then open the upper beam on the left side of the disassembly of the small bay, remove the upper and lower beams of the roller curtain, spread flat on the ground, pour water containing detergent, soak for a few minutes, clean with a brush, and finally wash with water, remember not to fold. This method is suitable for ordinary roll-up curtains. Rolling curtains are also called rolling curtains, which are different from the curtains that open and close left and right. The principle is that the whole curtain is rolled up and down by the coil tube. It is a kind of curtain that is widely used in modern times, and is more common in offices, banks, schools and other places. Due to many kinds of fabrics, according to the shading is divided into full shading, semi-shading and sunlight fabrics, rolling curtains made of fabrics are not the same function, to adapt to various occasions. In addition, according to the operation mode can be divided into electric curtain, spring type, pull bead type three. How to install rolling curtains

1. Measure the size of the window frame, determine the location of the installation code and fix it.

2, the installation of curtain accessories, such as the head, pull rope, etc., the head has two kinds of internal and external installation. When selecting the interior installation, place the rolling curtain in the window frame, determine the appropriate position, mark the position of the head screw on the top of the window frame, fix the left and right head with screws on the top of the window frame, and open the rotating module. When installing the exterior, use the same method to find the installation position, only the installation position of the screw is on the window frame or the wall, and the custom head is fixed.

3. The track of installing the rolling curtain is loaded into the right end and the left end of the upper rail to the system head with a drawstring and the system head without a drawstring, and then the rotatable module is fastened, and it is installed after confirming stability. Note: When folding, be sure to adjust the rolling curtain to be perpendicular to the wall before pulling it up; If it is necessary to stop in the middle or at the end, the pull rope should be 45° to the right, so that it will automatically tighten.