At the same time, press the up and down button for 3 seconds to reset WIFI, and soon the phone will receive a message from the device, and you can connect to WIFI by tapping it
< br >
After being fully charged, click on the \"cleaning\" option in the mobile APP, and the Mi home sweeping robot will automatically clean the whole house
< br >
The robot does not have the function of mopping the floor, so there is no need to install water in advance. On the Mijia sweeping robot APP, you can clearly see the moving track of the yellow dot representing the Mijia sweeping robot
< br >
In the process of cleaning, the robot will automatically draw a topographic map, and the map can be gradually formed in real time on the APP. The APP displays the cleaned area, remaining power and cleaning time.
< br >
The sweeping robot APP can set three cleaning modes with different intensities-quiet, standard and strong. The more powerful the performance is, the greater the noise, which can be balanced according to their actual needs.
< br >
Turn the machine on\/off
< br >
The long button starts, the ring indicator lights up, and the host enters the standby. When the host is at rest, the long button shuts down. After the shutdown, the cleaning ends
< br >
Note: The host cannot be turned off while charging
< br >
Clean short button start cleaning; Press any key to pause while cleaning
< br >
Note: If the power is too low, it will not be able to start cleaning, please charge first and then start cleaning
< br >
When the power is insufficient during the cleaning process, the host will automatically return to the charging seat to charge, and automatically return to the disconnect to continue cleaning after the power is sufficient
< br >
Before cleaning, tidy up all kinds of cables on the ground (including the power cable of the charging base) to avoid electrical power failure, damage to items or cables caused by dragging during cleaning
< br >
If the cleaning time is less than 10 minutes, it will be cleaned twice by default
< br >
charging
< br >
Automatic mode: After the cleaning is finished, the master will automatically return to the charging seat to charge
< br >
Manual mode: In the paused state, press the short button to start the recharge
< br >
The ring light breathes and blinks when the host is charging
< br >
Note: If the host does not find the charging seat, it will automatically return to the starting position, please manually put the host back to the charging seat to charge
< br >
Cleaning mode
< br >
After starting, the host will scan and generate a map and intelligent partition, and plan the cleaning path in the partition by sweeping along the wall first and then filling in the Z-shape, and complete the cleaning of each partition one by one, orderly and efficient, and full coverage without omission. After the cleaning is finished, the host will automatically return to the charging base to charge
< br >
Note: Starting local cleaning when paused will end the cleaning
< br >
timeout
< br >
When the host is in the running state, press any key to pause, press the button to continue cleaning, the button will return to the charging base and end the cleaning
< br >
Note: When pausing, charging the host on the charging seat will end the cleaning
< br >
< br >
If the host needs to add water or clean the mop during the cleaning process, please press any key to pause and remove the mop module. After adding water or cleaning the mop module, reinstall the mop module and press the key to continue working
< br >
malfunction
< br >
When an exception occurs during the running of the host, the ring indicator blinks red quickly and a voice prompt is displayed. For the solution, see Troubleshooting.
< br >
pour
< br >
If no operation is performed in the fault state for 10 minutes, the host automatically sleeps
< br >
When the host is charging on the charging seat in the fault state, the cleaning will end
< br >
Sleep rest
< br >
If no operation is performed for more than 10 minutes, the host automatically enters the hibernation state. In the hibernation state, the ring indicator blinks every second
< br >
Press any key to wake up the host when it is in hibernation state
< br >
pour
< br >
The console on the charging dock will not go to sleep
< br >
The system automatically shuts down after 12 hours of sleep
< br >
Regular cleaning
< br >
You can set a regular cleaning time by using the mobile client. The host will automatically start cleaning at the specified time, and automatically return to the charging base to charge after the cleaning is finished
< br >
Reset the Wi-Fi
< br >
When the router changes the configuration, forgets the password, or fails to connect to the host due to other reasons, open the top cover to reveal the Wi-Fi indicator, hold down the key and hold down the key until the voice prompts \"Reset Wi-Fi\
< br >
Zoning cleaning
< br >
The mobile APP can be used to set the area cleaning function, and the host will clean the area planned on the mobile phone
< br >
Millet sweeping robot instructions
Cleaning the water tank of the Xiaomi sweeping robot needs to follow the following steps:
First, remove the tank from the robot.
Then, open the lid of the tank and empty the water inside.
Next, thoroughly clean the inside of the tank with clean water, which can be scrubbed with a brush or cloth.
After cleaning, cover the tank and make sure it is sealed.
Finally, reinstall the water tank on the robot. Remember to clean the tank regularly to maintain the cleanliness and performance of the robot.