The reason for the slow filling is;
1, the general household water purifier pressure tank, is basically 3.2g.
2, you can use an air cylinder with a pressure gauge to inflate it, in the case of no water inside. The air pressure can be charged to about 0.05MPa, as clean water.
3, the pressure tank to add a pressure switch, in addition to the pressure tank inlet to install a check valve. The other is not what, according to the normal installation can be.
4, the pressure tank is actually very simple, a shell, inside is an inflatable rubber bladder. The purified water from the water purification mechanism goes into the pressure tank, and the bladder is squeezed to reduce the pressure, and the water is squeezed out by this pressure when the faucet is opened.
Home pressure tank pressure is insufficient, resulting in slow filling. In this case, it is necessary to check whether the pressure gauge of the pressure tank is under normal pressure. The table will be able to determine whether your pressure tank is in normal condition, if the pressure is lower than normal atmospheric pressure, then the water will not be enough pressure to be pressed up.
Maintenance also need to find a professional pressure tank maintenance supplier for maintenance. When the pressure of the pressure tank is found to be abnormal
What is the use of the pressure tank you said, if there is too much water, there must be a fault, and it needs to be repaired or replaced, and the fault should be eliminated in the bud to avoid big trouble. Remember one word, don't settle. It's often small problems that turn into big ones. Hope to help you!
What is the use of the pressure tank you said, if there is too much water, there must be a fault, and it needs to be repaired or replaced, and the fault should be eliminated in the bud to avoid big trouble. Remember one word, don't settle. It's often small problems that turn into big ones. Hope to help you!