The reasons why the automatic dispensing machine cannot lock the glue may be various, such as improper setting of the glue amount, plugging of the glue outlet, insufficient equipment pressure, etc. Solving this problem requires a case-by-case analysis. The following are some possible solutions:
1. Adjust the glue quantity Settings: If the glue quantity is set incorrectly, it may cause abnormal glue production. You can try adjusting the glue setting to make sure it is suitable for your product.
2. Clean the glue outlet: If the glue outlet is blocked, the glue effect may be affected. In this case, you can use a solvent or cleaning agent to clean the outlet to ensure that it is unimpeded.
3. Check the device pressure: If the device pressure is insufficient, the glue may not be locked. In this case, you need to check the device pressure to make sure it is within the normal range.
4. Change the glue: If you are having problems with a particular type of glue, try replacing it with another type of glue. Some glues may lock more easily, while others may require extra handling to work properly.
5. Check the device hardware: If the preceding methods fail to solve the problem, the device hardware may be faulty. In this case, you need to have a professional check the equipment hardware, find out what the problem is and repair it. In short, to solve the problem that the automatic dispensing machine cannot lock the glue, specific problems need to be analyzed, and corresponding measures are taken to solve it. If the problem does not resolve itself, it is recommended to seek professional help.
The reasons why the automatic dispensing machine cannot lock the glue may be various, for example, the pressure of the rubber barrel is insufficient, the rubber head or hose has air, and the control valve is blocked. The following are some possible solutions:
1. Check whether the air pressure of the rubber bucket is sufficient. If the air pressure is too low, re-adjust the air pressure.
2. Check whether there is air in the rubber head and hose. If there is air, discharge the air.
3. Check whether the control valve is blocked. If yes, clean or replace the control valve.
4. Check whether the software parameters of the dispensing machine are set correctly, including dispensing speed, pause time, etc. 5. If the above methods cannot solve the problem, you may need to consider replacing the dispensing machine or contacting professional maintenance personnel for inspection and maintenance.
Hope the above information can be helpful to you.
The automatic dispensing machine may not lock the glue for the following reasons:
1. The glue deteriorates or expires. New glue needs to be replaced.
2. The glue does not match the dispensing needle. A matching dispensing needle needs to be replaced.
3. The glue does not match the surface of the workpiece. The matching glue needs to be replaced.
4. The glue pipe is blocked. Need to check and clean the glue pipe.
5. The machine fails. Machine faults need to be checked and repaired.
You can investigate and solve the problem according to the above reasons, and seek the help of professional and technical personnel if necessary.
The automatic dispensing machine can not lock the glue may have the following reasons:
1. Glue deterioration: the quality of the glue itself is wrong, resulting in the inability to lock the glue. The solution is to replace the qualified glue.
2. Hose problem: The diameter of the hose may be too small or too large, resulting in failure to lock the glue. The solution is to replace the appropriate hose.
3. Glue gun problem: The spring of the glue gun may be loose or damaged, resulting in failure to lock the glue. The solution is to check and replace the spring.
4. Rubber valve problem: The spool of the rubber valve may be loose or damaged, resulting in failure to lock the rubber. The solution is to check and replace the spool.
5. Operation problem: It may be improper operation, such as pressing the switch for too short or too long, resulting in failure to lock the glue. The solution is to adjust the operation time.
Can be inspected and repaired according to the specific situation. You are advised to seek the help of professional technical personnel.