Automatic dispensing machine speed adjustment method:
1, the automatic dispensing machine can adjust the speed in the dispensing machine programming system, in which to find the system parameter Settings in the processing task, you can set the dispensing speed inside.
2, first of all, before commissioning, the pressure drop machine level. If it is not placed on the horizontal surface, it is easy to lead to the deviation of the debugging results, and finally some problems such as point deviation, too much glue, less glue, and overflow glue.
3. Choose the right needle. The needle of the dispensing machine is not uniform, and it should be adjusted according to factors such as glue, dosage, and product. The inner diameter of the automatic dispensing machine should be about 1\/2 of the inner diameter of the glue point, and the minimum inner diameter of the needle should be 0.1 mm.
4, adjust the height and distance between the distribution needle and the distribution position.
5, the height between the dispensing needle and the dispensing position also needs to be reasonably adjusted.
one
The automatic dispensing machine can adjust the speed in the dispensing machine programming system, where the system parameter Settings in the processing task can be found, and the dispensing speed can be set inside.
two
Another method is to adjust the speed of the dispensing machine by adjusting the pipeline, the glue outlet, the air pressure, and the needle, changing the pipeline from 1\/4 to 3\/8, or adjusting the glue outlet and the air pressure to speed up the glue flow rate; You can also use a large needle to increase the speed of glue; glue