Paint pulling wood grain is pulled out with texture brush, the following nine steps are specific steps: required tools: fiber cotton, paint, texture brush.
1, first, take a piece of fiber cotton, fiber cotton can fully absorb the paint.
2. Take paint with fiber cotton.
3. Wipe the paint evenly on the board.
4. Paint the entire board.
5. Get a texture brush.
6, starting from the far right, just like using a regular brush, scratch on the paint, so as to pull out a wood grain.
7, and then turn left, continue to pull wood texture.
8. Finally, pull the leftmost paint out of the wood grain.
9, this is finished, the paint grain is pulled out.
Color must be adjusted before making false wood grain paint on the surface of solid wood doors. The black sodium powder and yellow sodium powder are mixed in a ratio of 1:1 and moistened with a little alcohol, and then diluted with warm water to make the main color of the fake wood grain paint and the wood oil into medium yellow.
Cut off 1\/3 of the brush hair of the 6 tubes of small pen, dip it in water color and brush it on the surface of the solid wood door.
When the water color is not dry, use the same brush to draw mountain shapes on the lacquer surface and then modify the mountain shapes into wood grain. Dip your finger in carbon black powder and press carbon black powder in several places between the wood grain, and then use the brush to pull apart the carbon black powder to form wood knot eyes.
When brushing the water color, if the water color shrinks on the yellow paint surface, you can apply some soap on the facade to remedy it.