1. According to your description, this situation is considered to mean that there is a problem with the charging data cable of our mobile phone or the plug of the adapter, or there is a problem with the position of the tail plug connection line at the bottom of the mobile phone, which needs to be replaced in time.
2, the problem of users listening to music while charging, Apple specifically targeted iphone 7 and 7 plus launched airpods wireless earphones, which is equivalent to an advanced Bluetooth earphone, a charge can be used for 5 hours, easy to charge, while using airpods wireless earphones to listen to music. However, airpods headphones need to be purchased separately by users, and the domestic price is 1288 yuan! iphone lightning dock: Many people find airpods too expensive to accept.
3, personally think it can't. First of all, wireless charging is not applicable when driving. Second, wireless charging cannot be used while charging the phoneCharge and the wired charger won't fill Why?
1. Check whether there is any foreign matter in the charging interface of the mobile phone, such as liquid intake and debris, resulting in poor contact between the charging interface of the mobile phone and the charger. If this is the case, it is recommended to send the phone for repair as soon as possible to back up the phone data (phone book, SMS, pictures, etc.), and restore the phone to factory Settings (enter the phone setting - reset - restore factory Settings).
2, ⑤, through the above checks, if all are normal, then this situation may be, the charge control circuit on the motherboard, there is a fault.
3, use the original charger to connect the homeCharge from the mains. Replace the power socket Try or replace a data cable with a charger to charge. If the phone can be turned on normally, you are advised to back up data (such as contacts and multimedia files) on the phone and restore the phone to factory Settings. If the problem still exists according to the above methods, please bring the purchase invoice, repair card and machine to the Samsung service center for inspection.
4, hello, can not use wired and wireless charging at the same time. Reason: Due to the limitation of charging control, for the safety of mobile phone charging, when connected to wired charging, automatic switch to wired charging, wireless charging stops. Wireless charging only noThere is a connection line, you can only charge.
5, the wire interface is wrong. Because the mobile power supply in order to adapt to a variety of mobile phone applications, the mobile power supply is configured with a common mobile phone interface. If the phone interface happens to be wrong with the interface configured with the mobile power supply, the phone cannot be charged through the mobile power supply. The solution is to find a corresponding data cable. You can solve the problem. Not enough voltage or current.
1, the wireless charger has a reaction but does not charge into the Wireless charging can be charged wired can not charge Reason: whether the mobile phone model supports wireless charging or whether the wireless charger matches. Whether the wireless charger indicator is displayed normally. Mobile phone protective shell and other wireless charger external factors. Wireless charger Wireless charging can be charged wired can not be charged transmitter power Wireless charging can be charged wired can not be charged , may also lead to wireless charging can not be used.
2, abstract: If the mobile phone can directly support the wireless charger products, as long as the USB cable of the wireless charger is connected, and then inserted into the socket, and then put the mobile phone on it can be charged, very convenient.
3, shutdown charging test. Replace the charging position and eliminate the intermittent failure caused by poor socket contact. If conditions permit, replace the standby charger for testing. Or send the repair test to boot charging, such as the mobile phone is equipped with a third-party plug-in such as charging doctor, it is recommended to uninstall the test.
4, battery management IC damage This case is mostly because of the handThe machine fell to the ground resulting in the motherboard components out of welding, the probability is very small. If the battery is not charged and the motherboard is damaged, the store will charge you more than 500 so-called replacement motherboard fees, in fact, only need more than 100 replacement power IC is good. Non-original charger, charging cable damage this easy to do, ask people for an original iPhone charger and charging cable to try to know.
5, charging environment temperature is too high or too low: Apple mobile phone exceeds or below a specific temperature value, there may be no charging situation. If the temperature is low, it is recommended to put the iPhone in a slightly higher temperature environment to charge, orCharge after a period of use; If the temperature is high, it is recommended to put the phone in a slightly lower temperature environment for a period of time before charging.
6, make sure that the phone and wireless charger compatible: to make sure that your mobile phone supports wireless charging function, and the wireless charger is compatible with your mobile phone model. Different phone models may have different charging standards, so you must use a wireless charger that supports your phone model. Check the charger and power adapter: Make sure that the wireless charger is working properly and that the appropriate power adapter is connected, and that the power adapter is securely plugged into the power outlet.
According to your description, this situation is considered to mean that there is a problem with the charging data cable of our mobile phone or the plug of the adapter, or there is a problem with the position of the tail plug connection line at the bottom of the mobile phone, which needs to be replaced in time.
Battery management IC damage This situation is mostly because the mobile phone fell to the ground to lead to the motherboard components out of welding, the probability is very small. If the battery is not charged and it is said that the motherboard is damaged, the store will charge you more than 500 so-called replacementMotherboard fee, in fact, only need more than 100 replacement power IC. Non-original charger, charging cable damage this easy to do, ask people for an original iPhone charger and charging cable to try to know.
Reasons and solutions: for non-original chargers, it is easy to charge no electricity, because the charger specifications are not up to standard, replace a qualified charger. Please check whether the data cable is normal. The data cable looks normal on the outside, but it may have been broken inside.
There may be several reasons why an Apple phone cannot be charged: Charging cableOr the charger is damaged: you can check the charging cable and charger for broken or bent pins, or replace the original charger and charging cable to try. The charging port is dirty or damaged: You can remove any debris from the charging port at the bottom of the device, or check to see if the charging port is deformed or loose. If the charging port is damaged, it may need to be repaired.
In order to solve the problem of iphone 7 users listening to music while charging, Apple specifically launched airpods wireless headphones for iphone 7 and 7 plus, which is equivalent to a kind of advanced Bluetooth headphonesIt can be used for 5 hours on a single charge, and it is easy to use airpods wireless headphones to listen to music while charging.