New energy vehicle chargingElectrical process can be unplugged, but need to pay attention to safety issues. Before unplugging the charging gun, it is recommended to power off first, because the charging gun still has a strong current through, and forcibly unplugging will have the risk of electric shock. Here's how to unplug your charging gun: Turn it off. Some charging guns will be unplugged by scanning the bar code to power off, after power off, please wait a moment and then unplug the charging gun from the car jack.
Can the new energy vehicle be unplugged midway? The new energy vehicle can be unplugged halfway through charging, but it needs to pay attention to the correct mode of operation. Before you unplug the charging gun, you need to turn it off,Some charging guns will be powered off by swiping the card, scanning the bar code, entering the password, etc. Please wait for a moment after the power is powered off, and then pull the charging gun out of the jack of the car. Before charging, it is necessary to confirm whether the state of the vehicle is good and whether the charging equipment is normal.
In the charging process of new energy vehicles, users can unplug the charging gun. However, it is important to note that this operation must be done carefully to avoid possible safety hazards. First, before unplugging the charging gun, you need to turn off the charging device. Depending on the specific charging device, the closing method may be different, and may need to be swiped and scannedBar code, enter the password or unplug the power directly.
The new energy vehicle can be unplugged midway. The following is a relevant introduction to the charging of new energy vehicles: The correct way to unplug: First turn off the charging gun. Some charging guns will be powered off by swiping the card, scanning the bar code, entering the password, unplugging the power, etc. Please wait a moment after the power is turned off and then pull the charging gun out of the jack of the car. Note for charging: Before charging, it is necessary to confirm whether the state of the car is good or not.
The new energy vehicle can be unplugged in the middle of charging, but it needs to pay attention to the correct way in operation. First, the charging gun needs to be turned off. Some charging guns will be powered off by swiping the card, scanning the bar code, entering the password, unplugging the power, etc. After the power is powered off, please wait for a moment and then pull the charging gun out of the jack of the car. In addition, before charging, it is necessary to confirm whether the state of the car is good and whether the charging equipment is normal.
When using new energy vehicles, unplugging the charging gun midway will not affect the vehicle, but it can not continue to charge later, and it is necessary to re-operate the card and insert the gun. There are three main ways of charging new energy vehicles: slow charging: suitable for car chargers and family wall-mounted charging piles, and its current and powerPull the gun before it's fully charged, okay? '> New energy charging is not full when the gun can be drawn?
[Pacific Auto network] New energy vehicle charging is not full to pull. First, turn off the charging gun. Some charging guns will be powered off by swiping the card, scanning the bar code, entering the password, unplugging the power, etc. After the power is powered off, please wait for a moment and then pull the charging gun out of the jack of the car.
New energy vehicle charging process can be unplugged, but need to pay attention to safety issues. Before unplugging the charging gun, it is recommended to power off first, because the charging gun still has a strong current through, forcibly unpluggingThere's a risk of electrocution. Here's how to unplug your charging gun: Turn it off. Some charging guns will be unplugged by scanning the bar code to power off, after power off, please wait a moment and then unplug the charging gun from the car jack.
The new energy vehicle can be unplugged in the middle of charging, but it needs to pay attention to the correct way in operation. First of all, you need to turn off the charging gun. Some charging guns will be powered off by swiping the card, scanning the bar code, entering the password, unplugging the power, etc. After the power is powered off, please wait for a moment and then pull the charging gun out of the jack of the car. In addition, it is necessary to confirm the status of the car before chargingIf yes, the charging device is normal.
1, at this time should pay attention to whether there is a metal object placed on the wireless charger, please take it off and charge again. The power will be off for a while, this is not placed in the right position, detected metal foreign objects, automatic protection Settings. Make sure you use the official charging head. Second, look carefully at the wireless charging instructions, encounter metal foreign bodies near, it will automatically cut off wireless charging, and continue to flash green, after the power offReturn to normal.
2, if you encounter the millet wireless charger light has been flashing, you can first try to adjust the distance between the charger and the phone, or check whether the interface is loose. If the problem still exists, it is recommended to contact Xiaomi customer service or go to a professional electronic repair shop for repair.
3, the same as the previous packaging style, the use of one-time sealing pull, after opening can not be restored to the packaging, and the traditional parts business is completely different, this is the product is very confident, big brands use the design. The separate 20W Xiaomi wireless charger package has no charging head and data cable,Just a wireless charger and a simple guide to getting started.
4, finally, if the above methods are ineffective, you may need to consider replacing the charger or contacting Xiaomi customer service for further support and solutions. To better understand the problem, we can consider a practical example. Suppose a user places his Xiaomi phone on a Xiaomi wireless charger to charge it, but finds that the green light starts flashing.
5, the distance between the charger and the phone is too far or there are metal objects to block: The distance between the charger and the phone is closer to ensure that there are no metal objects to block. Charger or mobile phoneInsufficient battery: Check whether the battery of the charger and the phone is sufficient, if not, please charge it in time. Charging interface of charger or mobile phone is damaged: If charging interface of charger or mobile phone is damaged, please contact after-sales service for repair or replacement.
1, the new energy charging pile does not stop can draw the gun? Do not draw the gun without stopping the charging. Please handle the drawing as follows: The fast charging gun comes with a lock, which will lock when charging, and automatically unlock when stopping charging, and then you can pull itGuns. The slow charge gun does not have a lock, but the body slow charge interface has a lock, which is generally locked or unlocked simultaneously with the car, so the slow charge pile needs to unlock the door before drawing the gun.
2, after the power is cut off, it is necessary to wait for a period of safety time, usually waiting for the current to be completely cut off before pulling the gun. Take my commonly used Pregu convenient charging gun as an example, the first is to power off, then open the door, and finally safely unplug the charging gun.
3, [Pacific auto network] in the process of charging is not allowed to pull the charging gun. With the rapid rollout of shared bicycles in major cities across the country, the concept of the "sharing economy" is fastWith the rapid popularization, shared cars have quietly entered people's field of vision.
4, unlock the vehicle and pull out: If you find that after stopping charging, the charging gun still cannot be pulled out, you can try to use the key to unlock the vehicle and then pull out the gun. Standard drawing method: When pulling out the charging gun, it is necessary to press the unlock button of the gun body at the same time to pull it out, but not too hard. Use an emergency release device: When none of the above methods work, you can use an emergency release device to unlock the charging gun.
5, some charging stations have the function of automatic stop, so the new energy vehicle is fully charged and forgets to draw the gun, do not worry about itIn this case, after the new energy vehicle is fully charged, it will automatically stop, and will not cause adverse effects on the battery of the vehicle.
6, the new energy charging gun can not be pulled out. There are the following common situations: First check whether the charging gun is unlocked. This is related to the anti-theft function of the vehicle itself. Many charging guns also have buckles and keyholes. If you can't pull it out, use the key provided on the charging gun to press the buckle or insert the lock hole. When charging is complete, stop charging. You need to wait for the voice prompt from the charging station and then draw the gun.