Push the fixed strip wireless charging groove to the left, take out the original car wireless charging groove silicone pad wireless charging groove , and remove and take out the two USB cables. Put into the purchased wireless charging board wireless charging groove , the two USB on the wireless charging board need to pass through the two holes in the cover plate to reach the bottom. And put the retainer back on.
Set the wireless reverse charging opening to manual opening, that is, it must be opened manually in the setting. Huawei car automatic sensor wireless charger can be opened and closed intelligent, so the aseptic bumpy road conditions, built-in infrared sensor, the mobile phone is close, the clamp arm automatically opens and closes, the strong clamping force of the mobile phone is not easy to fall off, and it can easily cope with various bumps, and the left sensing key is easily unlocked. The mobile phone can be taken out manually in the flameout state, so that the operation is convenient and the room is collected freely.
Step 1: Installation positioning Ensure that the wireless charger is firmly installed in the proper position of the cab, choose one that neither slides nor obstructs the driving line of sightThe area of... Step 2: Connect the power supply Plug one end of the USB data cable of the wireless charger into the car smoke outlet and connect the other end to the charger. In this way, the charger can draw power from the car's power source.
1. Adjust the hair dryer to the output hot air state, heat the nano fingerprint model glue (hereinafter referred to as: model glue) to soften it (take 2-3 minutes), and then heat and soften the "model glue".
2, do a small test, that isIf it is so tilted to pick it up, it will not slide; And the purple rice bought has happened N times a night without charging the embarrassing situation. The back also uses a silicone pad to prevent sliding on the desktop. Stability is also stronger than the general wireless charger, because Belkin's wireless devices are optimized for Apple, continuous uninterrupted, stable charging efficiency.
3, the practice of nano glue ball is: pour white vinegar into the bowl, add flour, add glue, stir well, add dye, knead into a ball. A brief introduction of nano-glue is as follows: nano-glue is a matrix materialThe material is less than 200 nanometers of glue, its body is a hydrogel, is a three-dimensional network of polymers. It has the characteristics of non-melting and insoluble. Nano-adhesive has several advantages compared with other adhesives: First, it is small in size and easy to be swallowed by cells.
4, this panel is a coil combination, so that it is convenient for the phone to be placed in any position on the panel can be charged, without alignment. Its internal structure is roughly as follows: the shortcomings are not without, because the multi-coil wireless charging board product has as many as a dozen or even several wireless charging coils built in, and the problem in heating cannot be underestimated.
5, ▲Just go up there. Many cars will be equipped with wireless charging function, and many mobile phones support wireless charging function, which is not a rare function. In a variety of charging methods, the most convenient is undoubtedly automatic wireless charging.
Most families choose the legendary gs8 mainly based on these four reasons: good appearance, enough power, comfort to meet the needs of the family, and spacious space. In terms of appearance, first of all, the color of the car when listening to the sales sister said that the glacier blue personal feel very good, the car's headlights and air intake grille design is very nice, the finishing touch of the lights is full of fashion and cool,The body line is beautiful, rigid and flexible, the taillight echoes the front face, and the design is simple and clear.
Does not require any phone, as long as the phone supports wireless charging. This is a very good benefit for people who often have no battery and no data cable in the car. At present, the wireless charging standard used by smart phones and consumer wireless chargers on the market is mainly Qi, so as long as the mobile phone supports Qi wireless charging, then theoretically all wireless chargers using the Qi standard can be compatible.
On the other hand, compared with the low configuration of Highlander, Trumpchi GS8 has the advantage of configuration. allNeedless to say, the second-generation PEPS keyless entry and one-button start, mobile phone wireless charging function, etc., have brought convenient experience for driving control.
Since the introduction of magnetic charging by Apple, the convenience of wireless charging has been loved by consumers, which has promoted the prosperity of the wireless charging accessories market. Charging Head network recently disassembled MoYi Moyi's 5-in-1 magnetic wireless charger T268, this productIt can charge two iphones at the same time, and also has Apple Watch charging function, with USB-A charging output and night light. Next, we will take an in-depth look at the design of this product.
Mo1 5-in-1 Magnetic Wireless Charger T268: A model of exquisite design and efficient compatibility This innovative charger from Mo1 stands out with its 5-in-1 function and intelligent design. This charger is designed for wireless charging of iPhone and Apple Watch dual devices, while equipped with USB-A interface and intimate night light function, showing the needs of usersFor careful consideration.