1. After the small bee is turned on, the ear will have a voice prompt the unit price of the bee wireless charging scheme , and the device that can be matched will be automatically searched. At this time, turn on the Bluetooth device of the phone. The phone turns on detectability, that is, it can detect nearby Bluetooth signals. Then search for nearby Bluetooth signals, find the Bluetooth headset (generally will show the Bluetooth headset model), click to connect. If you are prompted to enter a password, the default value is 0000, indicating that the connection is successful.
2, Coring smallThe specific steps to use the bee wireless headset are as follows: Bee wireless charging solution unit price : After the small bee is turned on, the ear will have a voice prompt and automatically search for the device that can be paired. At this time, turn on the Bluetooth device of the phone. Detect nearby Bluetooth. Search for nearby Bluetooth, after finding the Bluetooth headset (usually the model of the Bluetooth headset will be displayed), click to connect. After confirmation, the connection is successful. Headphones are ready to use.
3, SONY Ericsson s 518 small bee loudspeaker how to use instructions: After the earphone is turned on, the earphone will have a voice prompt, automatic search can be used to pairAt this time, the headset Bluetooth device should be turned on. The mobile phone can be tested, that is, you can test the nearby Bluetooth signal, and then search for the nearby Bluetooth signal, and then search for the nearby Bluetooth signal, search for the Bluetooth headset signal (generally will show the Bluetooth headset model), and then link.
4, mobile phone connection bee loudspeaker how to connect the general wireless bee loudspeaker can be connected to the mobile phone, let the small bee play the music on the mobile phone, then the mobile phone how to connect the small bee loudspeaker? The method of connecting the mobile phone to the small bee is very simple: the small bee loudspeaker is turned on, and the ear phone has a voice prompt and automatically searches. Their products have excellent sound performance and durability. Audio-technica: Audio-Technica is a long-established Audio equipment manufacturer with highly acclaimed microphone products. Their products not only have excellent sound quality, but also excellent noise suppression.
When choosing a computer microphone, among the many brands, RODE Rode, MOMA, Relacart, etc., are worthy of consideration. RODE RODE introduces the wireless go II 2 generation 1 Tow 2 wireless small bee collar MikeWind, leading the sales on JD platform. This product not only inherits the features of the original, such as dual-channel recording, but also supports multi-device compatibility such as cameras, mobile devices, tablets and various types of computers.
The brand of Iron Triangle was founded in 1962, in the microphone top ten brands list is a committed to the design, manufacturing, marketing and distribution of audio equipment of large multinational companies, established since the company's products continue to enrich, pay attention to the quality of products, its microphone in the production process are the use of top materials, It has become a phase in the market with its high quality and durable characteristicsWhen the hot brand.
Computer microphone brand recommended RODE Rode, MOMA, Relacart card and so on.
Iron Triangle. The company's global development team has been dedicated to the design, manufacture, marketing and distribution of audio equipment. From its initial focus on the technology research and development of phonograph players, to today, the company has been able to develop high-performance microphones, headphones, wireless systems, even commercial rice ball forming machines and other high-quality electronic products for professionals and the general public. Shukomi.
Sony Bee no electricity Bee wireless charging program unit price , this radio needs to be charged once a month. Radio bee wireless charging program unit price , which is constructed of mechanical devices, electronic devices, magnets, etc. Bee wireless charging program unit price , a machine that converts radio signals with electricity and can listen to radio stations transmitting audio signals. Also known as radio, radio, etc. DSP technologyThe advent of the art radio marks that the traditional analog radio will gradually withdraw from the historical stage. The digital age of radio has arrived.
sony The bee is hot because the bee is used for too long, so the circuit board is hot. According to the relevant query, it is good to shut down in time to let it "rest", SONY wireless bee microphone, widely used in radio and television, micro film shooting, teaching videos, live interviews and other fields.
Sonny Bee can sing. Sony Bee wireless microphone device, strictly speaking, Sony bee refers to a range of products, can be based on demandOptional transmitter, receiver combination.
1, the small bee speaker generally needs 5V 600-800mAh charger. The loudspeaker, as the name implies, amplifies the sound and spreads it farther, and the sound of the loudspeaker is more penetrating than that of the speaker. According to the mode of use: can be divided into wired speakers and wireless speakers; According to the use: can be divided into teaching class loudspeakers, tour guide class loudspeakers, entertainment class loudspeakers.
2, no. Fully charged will automatically power off, so plug in 20 hours will not explode, are too long will affect the service life, it is recommended to unplug in time. Ordinary small bee loudspeaker is generally used 5V/ 600,800 mAh charger, charging time according to the power of the charger and small bee loudspeaker is different, generally each charging time is about 4-6 hours can be full.
3, the mobile phone charger generally output 5V voltage, if the rated input voltage of the small bee loudspeaker is 5V, then you can use the mobile phone charger to charge. However, mobile phonesThe output current of the charger may be small, generally around 500-800mA, if the rated input current of the small bee loudspeaker is large, then the use of the mobile phone charger may be slow to charge. It is recommended to use a charger with a large output current to avoid the problem of slow charging.
4, two hours. The ordinary Rod bee loudspeaker is generally used 5V/600-800mAh charger, the battery capacity is 8000 MA, the average charge takes two hours, one time can be used for one to two days, the charging time is short, the use of long time is loved by people.
To transform the ordinary bee into a wireless one, the following steps are required: Disassemble the bee: Disassemble the bee and take out the microphone and battery inside. Add a wireless transmission module: Buy a wireless transmission module online, such as a Bluetooth module or a WiFi module, and add it to the bee. Connect the wireless transmission module to the microphone: Connect the wireless transmission module to the microphone interface of the bee.
Plug the receiver into the amplifier audio input portPower on the wireless microphone. Make sure the microphone and receiver signal are connected properly. Turn on the power and adjust the volume to the appropriate height to hear the sound transmitted by the microphone.
Turn on the Bluetooth of the mobile phone and detect the nearby Bluetooth signal to search for the bee. The small bee loudspeaker turns on, the earphone has a voice prompt, and automatically searches for devices that can be paired. At this time, turn on the Bluetooth of the mobile phone, detect the nearby Bluetooth signal, search for the model of the honeybee loudspeaker, click to connect, enter the PIN code, when the mobile phone interface prompts that the connection is successful, the mobile phone and the honeybee loudspeaker are connected, turn on the mobile phone to play music.
First turn on the honeybee power supply and make it enter the standby state. Then turn on the power supply of the paired receiver, insert the receiver into the USB port on the computer, and enter the matching state. Finally, hold down the pairing key of the bee and get close to the receiver, and release the pairing key at the same time to complete the FM pairing of the expanded bee.
Rod Bee loudspeaker is generally used 5V/600-800mAh charger, battery capacity is 8000 MA, on average perIt takes two hours to charge a charge, and it can be used for one to two days at a time, and the charging time is short and the use time is long and is loved by people. The Rod Bee receiver is fully charged and disconnected from the charger.
RODE Rode microphone WirelessgoII II generation. The RODE microphone WirelessgoII II is a wireless bee receiver that can be used while charging, and the radio effect is very good. The small bee receiver has two types of wireless and wired, the receiver is portable, mobile, small size, loud sound, easy to use.
FunctionOn the other hand, Rhodes Bee is a digital wireless microphone, through the SERIES III 4GHz digital wireless transmission, 128-BIT encryption design, the use of linear distance up to 70 meters; Built-in heart-shaped full directional condenser microphone, equipped with intelligent noise reduction chip, can bring high-quality radio effect; And support 3-segment output PAD, automatically adjust the gain of switching microphone output, improve audio quality.
The solution to the unclear sound is as follows: To distinguish the receiving end and the transmitting end of the honey bee: on the back of the honey bee, you can see the English distinguishing mark, where receiThe ver is the receiving end and the transmitter is the transmitting end. The next step is: Connect cables. At the launch end of the bee, find the microphone sign and connect the mic to the launch end of the bee.
There is usually a Model on the back, and the Receiver behind is the receiving end, and the Transmitter is the transmitting end. The microphone is connected to the transmitting end of the bee, the jack has a microphone mark, the receiving end is connected to 35mm audio, and the other end is connected to the microphone input of the USB sound card. Long press the power button at the transmitting end and the receiving end, and adjust the frequency after starting up to confirm the frequency bandAfter that, the USB port of the sound card can be connected to the computer successfully.
Canon 5d IV and Rod Bee are connected like this. There are 5 to 5 lines in the Rod Bee, the receiving end is inserted into the output, the other end is inserted into the cylinder. Canon 5d four is a machine ten years ago, when the camera function is relatively simple, does not support video shooting, 5d four is not supported. Rhodes Bee is a digital wireless microphone.