1. Charge the router power, then connect the network cable to the WAN interface of the router, and then connect one end of the network cable to the LAN interface of the router, and connect the other end to the computer network port, and ensure that the computer can be connected to the Internet normally;
2. Then open the browser, enter the default browser address, usually 192.16.1.1 (or 192.168.1.10, you can see in the back of the router), enter the user name and password, generally the default Laiker router is guest, click OK to enter the Settings page;
3. Login success we can see WAN, LAN and wireless status;
4. Then enable the DHCP service. Click the \"LAN Settings\" button on the left, select the \"Enable DHCP Server\" check box on the pop-up page on the right, and click \"Apply\" to save the configuration.
5. Then configure the wireless network. Click \"Wireless Basic Settings\" in \"Wireless Management\" on the left, set the wireless status to on, set \"SSID\
6. Then set the wireless password, click \"Security Management\" in \"Wireless Management\
7. The basic Settings of the router are complete, and the local network can be successfully connected at this time. If you cannot access the Internet normally, proceed with the following operations:
Click \"WAN Settings\" on the left, click \"PPPoE user\" on the interface that appears on the right, and then fill in the correct PPPoE account and password below: PPPoE account and password is the ISP Internet service provider to our dial-up Internet account and password. Other Settings are consistent with the above Settings;
8. Well, dynamic ip setting wireless router Internet access is complete, enjoy the wireless!
1, first of all, you have to connect the network cable to your computer, in the network state, check the main router to give you the classification of the ip address is which section, and then record it, he will be used for the router Settings.
Then connect the network cable to the router wan port, the router is connected to the power supply; The next thing to do is to enter the router Settings, the initial login router address is generally fixed, or according to the instructions on the router to enter the account password login router.
< br \/ >
< br \/ >
2, after coming in, first set the network parameters in the external network Settings, that is, you directly in the local computer to view the dynamic ip parameters to fill in the static router (network access type must choose static ip), must be the same as the ip address you view, otherwise it can not be on the external network, save effective.
< br \/ >
< br \/ >
3, then set the Intranet configuration; The ip address in the Intranet configuration segment must be different from the ip address segment on the external network. If the external network is 192.168.1.1, then the internal network must be 192.168.X.1 outside of 1 paragraph (X is not equal to 1). The subnet mask is 255.255.255.0. Then save the Settings and restart.
< br \/ >
< br \/ >
4, Restart the login, you will find that the login ip address automatically changed to the Intranet ip address you just modified. Enter the account and password, log in, and view the Intranet configuration in network parameters. You will find that the parameters in the DHCP server have been automatically configured, you can modify the number range, but the ip segment cannot be modified, another point is to pay attention to whether the DHCP server state is on, if it is on, it will automatically assign ip to the connected device, if it is off, then want to connect to his Settings need to manually set the ip address.
< br \/ >
< br \/ >
5. Set the wireless basic configuration in the wireless setting; First, turn on the wireless, give the wireless network a name, and then save it.
< br \/ >
< br \/ >
6, followed by wireless security configuration: In the security configuration, the main is the choice of security mode, has been set wireless password, the choice of security mode is the wireless network encryption mode.
< br \/ >