The answer is as follows: Hello! In response to your problem, I suggest that you can deal with it in the following ways.
First, you can check if the flush of the toilet is blocked by foreign objects, if so, cleaning it may solve the problem.
Second, you can check if the flushing pipe is bent or warped, and if so, you can try to adjust the position of the pipe or replace it. Finally, if the above methods can not solve the problem, it is recommended that you contact a professional bathroom maintenance personnel for help. Hope these are helpful to you, thank you!
1, re-install the pipeline, squat toilet impulse is small, it is likely because of the abnormal installation of the pipeline, you need to re-install the pipeline.
< br >
2, modulation according to the water device pressure rod, the water can also be increased.
< br >
3, adjust the inlet valve, the water level of the inlet valve is low, it is easy to appear the situation of water weakness, you can remove the inlet valve, re-install the modulation to the corresponding height.
This is a more troublesome thing, the tube buried in the wall flushing small is itself caused by low water pressure or too small pipe, if possible, should be connected to a bend in the tube out of the wall, in the premise of not preventing squat toilet can be used next to a small water tank, storage of a small water tank can be flushed down, so that the water pressure is better.
1. The water outlet of the tank is blocked by other components or the opening is not complete, check it;
< br >
2. There is something blocked or blocked or bent in the sewer pipe, resulting in poor water flow;
< br >
3, the water valve switch is not suitable, open incomplete or open too slowly, if it is pulling the line is not too long;
< br >
4, whether the water level of the water tank is too low, too little water; Raise the water level;