Selection of different ceramic tile drill tools
< br >
1, speed control electric hammer. It is recommended to use speed regulating electric hammer for wall and floor tile drilling. The advantages of speed regulating electric hammer are: use low speed when you start on the tile surface, and accelerate the drive after the tile is drilled, so as to ensure that the tile is not broken.
< br >
2, ordinary electric drill. For many families, speed control electric hammer is not very common, ordinary electric hammer is common. Therefore, it is recommended that in the position of drilling, the electric hammer bit should first drill a small hole to prevent the bit from slipping on the tile surface. The tile is then drilled through with an electric drill with an impact drill bit, and finally driven in with an electric hammer. Another simple method is that the drill bit of the ordinary electric hammer can actually be pulled out half, which is intended to prevent the hammer from touching the tail of the drill, so that the electric hammer has no impact on the wall, and can achieve the effect of a percussion drill or electric drill, which can ensure that the tile is not broken.
< br >
3. Glass drill. The above mentioned is only the general strength of the tile, if it is vitrified brick or high-density tile, you need to use a glass drill in the position of drilling the tile first through, and then use an electric hammer to drive, in the use of the process must pay particular attention to the glass drill must bring water to play, otherwise it is difficult to achieve.
Hanging tile wall drilling with percussion drill using impact drill can be.
Using a high-speed electric drill to drill holes in a wall with tiles is less useful than a percussion drill.
Percussion drilling installation must be equipped with impact drill bits to use.
Otherwise, it will affect the process and effect of drilling, which may lead to unnecessary trouble when the tile is broken in the eye.
When drilling holes on a wall with tiles, do not use high-speed drilling.
What electric drill is used for ceramic tile drilling
< br >
The commonly used drill bits for ceramic tile drilling include Suncraft impact masonry bit, impact masonry bit, glass bit and other three types. In the eye of ceramic tile we need to use some necessary tools, impact hammer must be used, hammer and sample punch (also known as round chisel), the general family if there is no can use a large point of steel nails (also known as cement nails) instead, markers and measuring ruler is also necessary, which can ensure the accuracy of ceramic tile drilling to a large extent.
Ceramic tile drilling can also use a professional speed regulating electric hammer, so that in the operation process will be more convenient, the accuracy will also be improved, speed regulating electric hammer for ceramic tile drilling, begin to use low speed on the tile surface, to improve the speed after ceramic tile drilling, so as to ensure that the ceramic tile integrity does not break.
Make a suggestion, first knock the tile there is no empty drum, such as empty drum do not play a brick, drill first grinding a hole is the right way, and do not punch holes on the edge of the joint, the above places can be cracked or in the installation of hardware fracturing process. If in the central position, if the drum is not empty, it will not crack with a direct electric hammer.