Connect the charging cable of the Bluetooth speaker to the power socket How to charge the wireless Bluetooth charging method and make sure that the other end of the charging cable is connected to the charging interface of the speaker. Turn on the power switch of the power socket, and the charging indicator light of the Bluetooth speaker will light up, indicating that it is charging. Wait for the charging indicator to go off or show that the battery is full, indicating that the charging is complete. At this time, you can disconnect the charging cable.
First, make sure that Wireless Bluetooth charging how to charge it You have a suitable charger or charging cable. Most Bluetooth speakers come with a charging port, which is usually a Micro USB port or a Type-C port. It is recommended to use the original charger or charging cable, because they are more closely matched with the battery of the speaker, which can ensure the safety and efficiency of charging. If the original charger is lost or damaged, you can choose a reliable replacement that is compatible with the speaker.
There are many charging methods for Bluetooth audio, the most commonly used method is to use USB power adapterDevice or use a charger to charge. Use USB power adapter to charge Wireless Bluetooth charging how to charge it : Connect the USB power adapter to the power socket Connect the USB cable to the charging port of the Bluetooth speaker, insert the USB plug at the other end into the USB power adapter to start charging, and wait for the Bluetooth speaker indicator to turn green, indicating that the charging has been completed.
Method 3: Use mobile power If you are outdoors or traveling, can not use a power adapter or wireless charger, then use mobile power is also a goodSelect. First, we need to prepare a mobile power supply and a Micro USB data cable, insert the data cable into the charging interface of the small Bluetooth speaker, and then insert the other end of the Micro USB cable into the USB interface of the mobile power supply.
When charging, it is best to shut down and charge, one is good for the battery of the Bluetooth speaker, and the other is faster to charge. Generally speaking, the red light means that it is charging, and the green light means that it is full. If it is always a red light (charging for more than 3-5 hours), it indicates that there is a problem with the charging circuit of your speaker, or it does not have the full charge stop function. If chargedIf 1 hour can be used normally, it is best not to overtime.
1. Charging with earphone charging box: The general Bluetooth headset (split) will come with a charging box wireless Bluetooth charging method , in addition to wireless Bluetooth charging method has the function of storing and protecting the headset, but also the function of charging the headset, We can use our ears when our headphones are out of power outsideThe remaining battery in the case charges the Bluetooth headset.
2, use the earphone charging box to charge. Use your phone to reverse charge. Charge with a charging cable. Charge with a power bank. vivo 1 minute ago · vivo is a brand focused on the field of smart phones.
3, earphone charging: When the earphone is not in use, please put the earphone into the charging box and close the cover, the charging box will automatically charge the earphone. Charging box Charging: Wired charging: The charging box can be used with a charger, mobile power or computer using a USBType-C data cableConnect to charge. Wireless charging (wireless charging) : Please adjust the position of the charging box, align the center of the lower part of the charging box with the center of the wireless charger, and the indicator light indicates that it has been charged normally.
4, choose the right charger. Generally, Bluetooth headsets have a dedicated charger, if there is no dedicated charger, you can find the charging interface (some are thin and round holes, some are MiniUSB universal interface) the same, and rated output power of the same charger to use. When charging, you should plug in all the plugs, not only more than half of them, so that the machine will be damaged for a long time.
5Charging with a charging case: Most wireless Bluetooth headsets come with a charging case where the headphones can be automatically charged. For the AirPods series, simply place the headphones into the charging case and close the cover, and the headphones will start charging. Wired charging: If the charging case is low on power, you can use the included USB charging cable or USB-C charging cable (depending on the headset model) to connect the charging case to the power adapter and plug it into a power outlet for charging.
1, when charging Wireless Bluetooth charging method , we need to pay attention to distinguish between the left ear and the right ear, and then put the headset back to the charging box Wireless Bluetooth charging method the corresponding position, close the box cover can charge the headset. When putting the headset back in the charging case, it is necessary to distinguish between the left ear and the right ear. In this way, we can ensure that the headset can be properly charged and avoid the situation of insufficient charging.
2, choose the right charger. General Bluetooth headsets have a dedicated charger, if there is no dedicated chargeElectrical appliances, you can find the charging interface (some of the fine mouth round hole, some of the MiniUSB universal interface) the same, and rated output power of the same charger to use. When charging, you should plug in all the plugs, not only more than half of them, so that the machine will be damaged for a long time.
3, first put the headset back to the corresponding position of the charging case. Then close the charging case to charge. If there is no power in the charging case, you need to connect a usb port charger, connect to the power supply to charge. Check the charging indicator: Most Bluetooth headsets come with a charging indicatorThe light, it will show the charging status.
Earphone charging: When the earphone is not in use, please put the earphone into the charging box and close the cover. Wireless Bluetooth charging how to charge it , the charging box automatically charges the earphone. Charging box charging: wired charging: The charging box can be charged with the charger wireless Bluetooth charging method , mobile power or computer using USBType-C data cable access for charging.Wireless charging (wireless charging) : Please adjust the position of the charging box Wireless Bluetooth charging method , the center of the lower part of the charging box is aligned with the center of the wireless charger, and the indicator light indicates that it has been charged normally.
How to use Bluetooth headset wireless charging? Choose the right charger. Generally, Bluetooth headsets have a dedicated charger, if there is no dedicated charger, you can find the charging interface (some are thin and round holes, some are MiniUSB universal interface) the same, and rated output power of the same charger to use. Plug in all plugs when chargingGo, do not only insert half, so that the machine will be damaged for a long time.
Charging with headphones charging box: General Bluetooth headset (split) will come with a charging box, it in addition to have the function of storage protection headset, but also can charge the headset function, when in the outdoor wireless Bluetooth charging how to charge Our headset out of power, you can use the remaining power inside the headset box to charge the Bluetooth headset.
Confirm that Bluetooth headsets support wireless charging: Not all Bluetooth headsets support wireless charging, becausePut the machine in charge for a while, the red light does not flash and the charge is completed. If there is no power in the charging bay, connect the usb cable and prepare to charge.
2, wireless Bluetooth headset charging bin Correct charging method When the headset has no power, please remove the headset. The headphones are then placed in the charging bay, where you can choose to charge them individually or together. Once the charging bay cover is closed, when it appears green, it means that the charging bay is fully charged. At this time, just put the headset into the charging bin for a short time to charge, and when the red light stops blinking, it means that the headset is fully charged.
3, the correct charging method in this caseThere is the use of earphone charging box for charging, the use of mobile phone reverse charging. Charging with earphone charging box: The general Bluetooth earphone (split) will come with a charging box, in addition to having the function of storing and protecting the earphone, but also the function of charging the earphone, when the earphone is out of power in the outdoor, you can use the remaining power inside the earphone box to charge the Bluetooth earphone. 4, First of all, took out the two Bluetooth headphones in the warehouse, closed the cover, and then connected the charger to the charging cable for charging, which took about two hours. After charging the charging room, you can put two Bluetooth headsets onEnter the charging room. After an hour in the charging room, the two Bluetooth headphones were nearly full. Turn on your phone's Bluetooth. If you previously needed a default connection, ignore it.
5, if you put the headset into the Bluetooth bin and then charge the Bluetooth bin, this time will give priority to the battery in the headset to charge, and then charge the charging bin after the headset is full. It is also possible to take out the headset to charge the Bluetooth bin separately, the Bluetooth bin is equivalent to the mobile charger of the Bluetooth headset, that is, it is an independent individual, whether the Bluetooth headset is in the Bluetooth bin can be charged directly through the data line.