1. This is the default behavior of Huawei mobile phones, which saves power when no foreground application is connected to the network.
2The details are as follows: First, open the phone and find the Settings icon on the desktop, and click to enter. Second, in the Settings page that opens, click on Battery options. Step 3, go to the battery Settings page, find more battery Settings at the bottom, click to enter. Step 4, after going to the more battery Settings page, you can see below the always keep the network connection function is turned off by default.
3. In order to save power, the corresponding power saving optimization is performed after the screen is off. It is recommended that the WLAN advanced Settings select Never when maintaining WLAN connection in hibernation state.
4, the first step, click and open the mobile butler application. The second step is to go to the main page of the mobile phone butler software as shown below, and click the battery icon pointed by the arrow. Third, in the battery page shown below, click the more battery Settings option indicated by the arrow. In the fourth step, we can see more battery Settings page as shown in the image below, turn on the switch to the right of always keep the network connected while sleeping.
5. Check the Wi-Fi Advanced Settings screen, open the "Keep WLAN connection in hibernation state" option, select always, the Wi-Fi connection will be maintained after the screen is extinguished. In "Settings, VOOC 0, DASH, PD charging protocol. VOOC 0 mobile phone: Support DCP, VOOC 0, VOOC 0, DASH, VOOC 0, WARP, PD charging protocol.
2, OPPO mobile phone support charging protocol: OPPO ordinary charging mobile phone support DCP general charging protocol. VOOC 0 phones support DCP, VOOC 0, and DASH charging protocols. VOOC 0 phones support DCP, VOOC 0, VOOC 0, DASH, PD charging protocols. VOOC 0 mobile phoneSupports DCP, VOOC 0, VOOC 0, DASH, VOOC 0, WARP, and PD charging protocols.
3, OPPO Reno series mobile phones support a variety of fast charging protocols, the following is the summary and compatibility of each model: OPPO Reno12 series: 5000mAh battery, support 10V SuperVOOC up to 80W, compatible with a variety of power; 5V VOOC is also supported. OPPO Reno11 Series: 4800mAh (or 4700mAh dual cell) battery, 10V SuperVOOC Max 67W, 5V VOOC support 30W.
4, W AirVOOC wireless charger overall introduction: Faster: 65W AirVOOC 5 minutes can be charged to 25% power, faster than many wired charging. More convenient: parallel double coil design. Safer and more comfortable experience: Using an active semiconductor cooling solution, the phone temperature does not exceed 40°C when charging (in the display state).
5. OPPO K7x supports the following fast charge protocols: 30W VOOC flash charge protocol: VOOC flashCharging is a fast charging technology from OPPO, which uses 5V/6A voltage and current to charge the phone from 0 to 70% in 30 minutes. PD Fast charge protocol: PD protocol is a universal fast charge protocol, using 5V/3A, 9V/2A and 12V/5A voltage and current, the maximum support for 18W power output.
6, the protocol supports 5V/3A, 9V/2A and 12V/5A voltage and current options, with a maximum power output of 18W. The OPPO K7x also supports the QC (Quick Charge) fast charge protocolThe available voltage and current options include 5V/3A, 9V/2A, and 12V/5A, again supporting up to 18W of charging power. Users can choose the appropriate charging protocol according to different usage scenarios and compatibility of charging devices.
1, the small love screen mode supports opening/closing, and supports setting the effective time period. Setting steps: Open the App, click the profile picture in the upper right corner, click the gear in the upper right corner (setting), and open the Bluetooth settingB, click on the connected Xiaomi wireless charger Bluetooth speaker, find the option to turn on/off the "Little love charging clock", and set the start time/end time in the "Clock setting" option (The "Little love charging clock" option is turned on by default, and the default time period is from 9:00 to 19:00.
2, first download the Xiaomi audio app, click the top right corner profile picture. Then click the gear in the upper right corner (setting), turn on the Bluetooth device, click the connected Xiaomi wireless charger Bluetooth speaker, and connect the speaker with the app. Finally, set the clock in the app.
3, follow the following steps to set the display time: OpenMillet phone 【 Settings 】. After entering the "Setup" page, drop down the page, find the "Display" option and click to enter. Click to enter 【 Screen Preview 】. Turn on the switch behind the screen preview to display information such as the time, date, and notification. You can also set time to open, automatically open/close the screen preview.
4, turn off the Mi 13 Ultra's home screen through Settings, tap the Settings icon, and then scroll down to find the "Battery and Performance" option. In the "Battery and Performance" option, you can find the wireless charging option and turn it off. You can still close the user through the shortcutDisable the wireless charging function of the Mi 13 Ultra using the shortcut.
5, it is worth mentioning that when charging, even if the phone is in the lock screen state, it can automatically switch to the small love screen mode, just touch to wake up the small love students, to achieve the convenient operation of the large screen speaker. The speaker is equipped with 280cc large sound cavity, double 5W Ndfeb internal magnetic speaker and double passive bass radiator, supporting high-fidelity surround sound, Bluetooth 0 connection is stable, and the maximum connection distance can reach 10 meters.
6, millet 9 non-stop pop-up small love solution is as follows: First open the Settings, findLittle love classmates; Select ai key in the Settings, select long press to wake up; Then find the wake up Settings, click on the right to close the small love classmate can be.