Refer to the following information: The device compatible charging protocol can be judged according to the maximum supported charging power: Note:vivo flash charge, dual engine flash charge are vivo's own fast charge protocol.
vivo flash charging dual-engine protocol, dual-engine flash charging technology is a mobile phone fast charging technology, which is developed by vivo under the premise of compatible with the international mainstream fast charging protocol. The dual-engine flash charging technology uses the dual-charging chip parallel charging method, which is 2 times faster than the ordinary charging technology, and has nine safety protection technology.
Maximum support 17W PD fast charge models: iQOO Neo9 Pro, X100 Pro, vivo Pad Air, iQOO Neo8 Pro, iQOO Pad, vivo PadiQOO Z7x, iQOO Z7x (m), iQOO Neo7 SE. There is no charger and data cable that supports PD fast charge: 200W, 120W flash charger and 80W charger are compatible with 65W PD fast charge protocol; The charging cable included with the 120W and 200W chargers supports PD fast charging.
Fast charge protocol supported by vivo mobile phone: It needs to be determined according to the charging head parameters of the mobile phone. Charging head identification 9V2A supports QC0; If the charging parameter is higher than 9V2A, QC 0 is not supported (in addition to iQOO 5 Pro, iQOO 5 Pro supports QC 0); If the mark is lower than 9V 2A, it is normal charging. Note: The 5V 5A only supports vivo's proprietary charging protocol.
QC fast charge, you can see the charging protocol supported by X70 Pro mobile phone: vivo flash charge: up to 44W (11V 4A/3A) Ordinary charging: 10W (5V2A) vivo wireless charging: does not support Qi wireless charging: does not support reverse charging: No supportVOOC 0, VOOC 0, DASH, VOOC 0, WARP, PD charging protocols.
2, OPPO ordinary charging mobile phone: support DCP general charging protocol. VOOC 0 mobile phone: Support DCP, VOOC 0, DASH charging protocol. VOOC 0 mobile phone: Support DCP, VOOC 0, VOOC 0, DASH, PD charging protocol. VOOC 0 mobile phone: Support DCP, VOOC 0, VOOC 0, DASH, VOOC 0, WARP, PD charging protocol.
3, OPPO Reno series mobile phones support a variety of fast charging protocols, the following is the summary and compatibility of each model: OPPO Reno12 series: 5000mAh battery, support 10V SuperVOOC up to 80W, compatible with a variety of power; 5V VOOC is also supported. OPPO Reno11 Series: 4800mAh (or 4700mAh dual cell) battery, 10V SuperVOOC up to 67W, 5V VOOC support 30W.
4, the protocol supports 5V/3A, 9Voltage and current options for V/2A and 12V/5A with a maximum power output of 18W. The OPPO K7x also supports the QC (Quick Charge) fast charge protocol, which offers voltage and current options including 5V/3A, 9V/2A and 12V/5A, again supporting up to 18W of charging power. Users can choose the appropriate charging protocol according to different usage scenarios and compatibility of charging devices.
This phone only needs to put the phone in the wireless chargerIt can be charged on the electric base. This phone can also be wireless reverse charging, the method is: click "battery" in the phone Settings menu, click "charging Settings" option, open the switch on the right side of "wireless reverse charging", and put the phone back to back with the device that needs to be charged. vivo/iQOO currently supports wireless charging models: iQOO9Pro, X70Pro, iQOO8Pro.
iQOO9pro has magnetic. iQOO's first 120WGaN charger, which uses gallium nitride GaN material, weighs about 135g and measures 61x55x29mm, a full circle smaller than the previous generation, this 120WGaN charger also supports PD and PPS protocols, with a maximum support of 65W, which can be quickly charged for compatible laptops, mobile phones and other devices, and supports 60W charging for the RedmiBookPro15 notebook.
1, W wireless flash charging vertical charger is plug-and-play wireless flash charging protocol , when using wireless charging, use the mobile phone standard charger to connect theThen put the left and right center vertical/horizontal screen of the phone on the base to realize wireless charging. After charging, remove the phone and disconnect the power supply. If you have more questions, you can enter the vivo official website - I wireless flash charging agreement - online customer service - slide down the bottom - online customer service - enter the manual customer service into the consultation wireless flash charging agreement understand.
2, wireless flash charge is a wireless charging technology, it uses the principle of electromagnetic induction to transfer electricity from the charger to the device,Without the use of cable connection. This technology allows users to more easily charge without worrying about wire length and damage. At the same time, wireless flash charging can also improve the efficiency and speed of charging, so that users can fill the device more quickly. The working principle of wireless flash charge Wireless flash charge uses the principle of electromagnetic induction.
3, XFold, XNote, iQOO9Pro, X70Pro, iQOO8Pro. The use of wireless charger is to connect the standard charger and data cable of the mobile phone to the wireless charger, and then put the mobile phone in the center of the left and right of the wireless charger baseSet, wireless charging can be achieved, the indicator light will have a breathing effect, 5 seconds after the extinguishment, plug and play, convenient and quick.
4, mobile phone vertical wireless charging: Please first put the wireless charging pad on the tray of the wireless charger, increase the tray height, and then put the mobile phone on the wireless charger to charge. Horizontal wireless charging of mobile phone: The mobile phone can be charged directly on the wireless charger without placing the wireless charging pad. If the wireless charging pad has been placed before, please remove it first and then charge it horizontally.
5, is October 2019, using the Snapdragon 855plus processor, toAnd a 39-inch screen. First connect the charger with the data cable in line with the mobile phone charging protocol, and then connect the wireless flash charging board, and put the charging board on the back of the phone, pay attention to the position must be positive, do not put crooked, and then the phone can start charging. Some phones need to turn on the wireless charging function in the Settings to use.
6, flash charge is a fast charging technology that can make the mobile phone fully charged in a short time. Flash charge is a fast charging technology that can make the mobile phone fully charged in a short time. It is independently developed by OPPO and applied for 18 patents.It increases the fastest charging speed by more than 4 times, and has impeccable intelligent all-end five-level protection, which is the fastest and safest mobile phone charging technology in the world.
The wireless flash charging protocol is the most widely known wireless flash charging protocol
PD fast charge protocol - The real charging almighty king PD, that is, USB Power Delivery, with its USB Type-C interface and the excellent performance of version 0, has become a leader in the field of fast charge. The PD protocol can provide a variety of output schemes from 5V-2A to 20V-5A, up to 100W, which not only meets the needs of mobile phone charging, but also provides strong support for notebooks and displays.
What is the PD fast charge protocol? The full name of PD should be called USB Power Delivery Specification, which is a fast charging standard launched by the USB standardization organization. The USB-PD protocol, the full name of USB Power Delivery, even Apple, which likes its own creation and creates industry standards, is willing to support PD fast charge as its own iPhone fast charge technology.
The chip of the mobile power supply supports two-way fast charging, 4A high-efficiency switch charging, 18W high-efficiency synchronous boost output, QC/FCP/PE/SFCP and other fast charging protocols, such as the charger is the QC0 protocol, that is, 9V, when charging the mobile power, there is about 18W power, and the battery can be filled quickly.