The role of the voltage regulator is to adjust the output voltage of the generator, so that the voltage is not too high when the engine speed is high to burn the electrical appliance, the role of the rectifier is that the voltage emitted by the generator is ACElectricity, and batteries and other electrical appliances need direct current, its role is to convert alternating current into direct current, called rectification.
Motorcycle voltage regulator, rectifier regulator, electronic voltage regulator is the same. The function is to charge the electric rectifier generated by the magneto into the battery, and adjust the voltage, so that the voltage is stable, and not because the voltage is too high, and damage the link of electricity (such as headlights). Electronic voltage regulators are particularly prominent because electronic regulation accomplishes these functions. In fact, now widely used are sub-regulated.
It is mainly composed of vacuum tube, ignition tube and mercury arc. It will come from the magnetoAc current is rectified for DC power, which is then adjusted to about 12 volts for electrical applications in cars, including charging batteries. The rectifier is broken. The battery can't be charged. Some rectifiers have no voltage output when damaged, and some output voltages are too high. If damaged, should be replaced in time. Motorcycle rectifier generally has red, green, black, yellow, powder five lines.
is different. The motorcycle 5-line regulator is not the same as the agricultural vehicle, the traditional four-line rectifier is generally half-wave rectification, and the five-line is full-wave rectification or three-phase rectification. Automobile regulators are of relay type and electronic type. There are three regulatorsCan be installed on the electric vehicle '> Motorcycle wireless charging bracket can be installed on the electric vehicle
1, motorcycle wireless charging bracket is not installed in electric vehicles. The unlimited charging bracket is directly connected to the battery of the motorcycle, which matches the voltage of the battery, and the voltage of the battery of the motorcycle and the battery car is different, and the two are not universal.
2, static wireless charging in cost compared to the charging pile is more expensive, the wool is in the sheep, if the laying of static wireless charging device, the last to pay for it is the user, charging costs up the advantages of electric vehicles will be gone. Say againDynamic wireless charging, dynamic wireless charging in popular terms is to go and charge, can completely solve the battery life problem of electric vehicles, plus is to go and charge there is no charging time concerns.
3, if the new energy vehicle can also discharge while charging, it can not solve the problem of long-distance charging? Not yet. The Swedish side is already preparing to do just that. Charge on the go. How do we do that? It is reported that Sweden is building a road that can charge electric vehicles while driving, calling it "the world's first permanent electrified road."
4, it is worth mentioning, nearIn the Interim Regulations on Wireless Charging (Power Transmission) Equipment Radio Management issued by the Ministry of Industry and Information Technology, it is clear that the charging power limit of mobile devices such as mobile phones is raised to 80W, and the management provisions are also applicable to the wireless charging of electric vehicles. This has undoubtedly injected new impetus into the development of wireless charging technology for electric vehicles. In short, electric vehicle wireless charging technology still faces many challenges, but its development prospects are broad.
1, GPS locator can be divided into connectors andNo lines. The connected GPS locator needs to be connected to the power supply on the car, so it needs to be installed, but it does not have to worry about the power supply problem, and can be used after installation. The wireless GPS locator is powered by its own battery, so it often needs to be charged, and its advantage is that it does not need to be installed, and it can be placed in a hidden position at will.
2, wiring well, I think it is still more practical, wireless is also able to locate, but people do not know, if the wiring people cut off the money background at least there is an alarm information. Easy to find in time. We could put a wire in if we had the money,Put a wireless one. It just costs too much. Ha ha. It must be wired. I bought a motorcycle last year and it was stolen, and the police couldn't find it.
3, once the GPS locator captures the signal of the car, it will immediately send the location of the vehicle through the wireless network to the monitoring center, monitoring personnel can monitor and track the dynamics of the vehicle in real time. This technology is widely used in cars, trucks, motorcycles and other mobile carriers. When choosing and using a GPS tracker, the specific needs of the vehicle should be considered first. Secondly, ensure the stable reception of GPS signals to prevent signal interference.
4, check the line, most of the GPS locator on the market are still connected to the line, need to connect the power cord to provide power. Therefore, you need to check whether the line is properly connected. Use the GPS type detector to search around the car to find the installation location. The motorcycle location tracker can help the owner track the location information of the motorcycle, but if the location tracker cannot be found, it is recommended to contact the relevant maintenance personnel for overhaul.
5, for the query of the motorcycle positioning tracker, there are the following methods: computer query: use the administrator account and password, log in to the computer terminal in the networkAfter integration, you can view the detailed location of the GPS target at any time. Mobile phone query: Log in to the WAP website through the mobile phone to query the location of the target. Route query: The monitoring computer host can check the GPS target's current movement trajectory and all movement trajectories within 60 days.
1, wireless charging technology is a non-contact power transmission technology, the use of electromagnetic induction principle to achieve charging, to avoid the trouble of data line charging. inIn the car, you only need to put the phone on the charging pad to charge it. It is worth mentioning that wireless charging technology can also solve the charger leakage, running and other security risks. If your phone is still unable to charge, it is recommended that you check the above aspects to determine the specific cause of the problem. 2, the principle of wireless charging technology is to use electromagnetic induction or resonance technology to transfer energy from the power supply equipment to the electrical equipment, so as to achieve battery charging. Wireless charging technology is used in a wide range of applications, including mobile phones, electric vehicles and so on. In the first version of the BMW 325li, the front and back rows are equipped with a USB interface to supportWireless charging function. This wireless charging technology is not only convenient and fast, but also does not need to worry about leakage and other problems, which is very safe and reliable.
3, the core principle of wireless charging is to transmit energy through the magnetic field, without physical contact, so that the charger and the electrical equipment to achieve non-contact power exchange. In this way, the charger and the device do not need to be exposed conductive contacts, truly realize the wireless charging experience. Wireless charging technology applied to the first version of BMW 325li, wireless charging technology is mainly used for mobile phones, tablets and other portable devices to provide easy and fast charging services.
4The BMW 530e iPerformance will introduce an innovative technology - wireless charging technology, which will significantly simplify the charging process. Through a 2-kilowatt wireless charging system installed in a garage or dedicated parking space, the vehicle does not need a traditional charging line, just park on the charging pad, and can quietly transfer power through the alternating magnetic field coil. 5, wireless charging technology, the principle of which is derived from wireless power transmission technology, is mainly divided into two types of low power and high power. Low-power wireless charging, such as our common mobile phone Qi charging, usually uses electromagnetic induction technology. Such asSmartphones can easily charge wirelessly in this way.
6, BMW wireless charging only need to put the mobile phone with wireless charging function on, you can automatically charge. Car wireless charging technology is the application of mobile phone wireless charging technology in the car, which provides people with the comfort and convenience of charging by placing mobile phones in the charging area of the car, and also solves many problems in the traditional charging method, such as inconvenient wiring and inserting cables and forgetting to bring charging cables.
Connection: The corresponding of the rectifier and the car is as follows, red -- red, black -- red, yellow -- yellow (or white), pink -- white (or yellow), green -- green. The green line is the ground, the yellow line and the pink line are the input, the red line is the output and the black line is the sample voltage regulator. Either of the two red lines is the output, the other red line is connected to the voltage regulator, the green is the ground, and the yellow and white are the input.
The green line of the rectifier is grounded, the yellow line and the pink line are the input, the red line is the output, and the black line is the sampling voltage regulator. If the two red lines on the car do not separate colors, then any one is the output, the other red line is connected to the voltage regulator, the green is grounded, and the yellow and white are lostOn in. That is, the corresponding of the rectifier and the car is as follows, red and red, black and red, yellow and yellow (or white), powder and white (or yellow), green and green.
If the old line is used by the Qianjiang five-line rectifier, it is a full-wave DC rectifier. Two white lines contact the motor lighting charging coil, the red line is connected to the battery, the black line is grounded by the iron, and the red/white line is connected to the power supply of the electric door lock, that is, the red/white line is connected to the open key. The new connection on the right side of the figure is a half-wave rectifier, the red line is connected to the battery, the green line is grounded by the iron, the yellow line has two connectors, respectively connected to the magneto lighting coil and the headlight switch, and the white line is connected to the magneto coil.
Pink and yellow coil, black switch behind the positive charge, red directly connected to the positive battery, green iron.
The five-wire rectifier has one more sampling voltage line than the four-wire rectifier, which is generally black, and it is connected with the power outlet line of the key door switch, that is, the power line that opens the key.