1. First, go to the Settings page of the first router. Enter 19161 in the address bar of the browser to log in to the management page. Select Wireless Bridge in Application Management and change the IP address in the LAN port Settings to make sure it is different from the IP address of the second and third routers, for example set to 19162, then save and restart the router.
2, three router Settings, justConnect the LAN ports of the three routers using network cables.
3. In the setting center of the first primary router, click SSID under "Basic Settings" in "Wireless Settings". (Note that the SSID is not Chinese, select channel 1, enable wireless function and SSID broadcast) Click "Wireless Security Settings" in "Wireless Settings", select "WPA-PSK/WPA2-PSK" to set "PSK password".
Prepare the wireless triple charge : three network cards wireless triple charge , one network cable, and one computer with Internet access wireless triple charge . Choose one of the two computers with good performance as the host computer, and let this host can access the external network. The host plugs in two network cards, one connected to the external network, the other connected to the other computer.
A computer with two network cards and a computer with one network card are connected by a cross cable. The IP setting of the network card that connects a computer with two network cards to another computerSet: Address: 19160.1, subnet mask: 2525250, gateway do not fill in, DNS do not fill in. Then create a new broadband connection, and the connected device selects another network card to connect to the external network. After setting up, the broadband connection is shared.
Right-click on one of the highlighted private network connections and click on the "bridge" option After a connection process, a new bridge is created Wireless triple charge If you are not very clear about the concept of a bridge, you may wish to think of it as a switch with only 2 ports.
It is recommended to try to use a router to set up a local area network for two computers to share the Internet, and then set up a class of files that you want to visit to share it. One, connect the router, the cat and the computer. Connect all the connections of the cat's outlet and computer network card to the router's LAN (some routers are marked with 4......) The wan port does not need to be connected. Second, reset the router.Set host iP: 19160.1, subnet: 2525250 Gateway empty) The other machine: iP: 19160.12, subnet: 2525250 Gateway: 19160.1The two PCS can be connected. Set the two PCS as follows: Start - Settings - Control Panel - Firewall - Exception - Select "File and printer sharing" to disable the firewall.
t568b is arranged in the following sequence: Insert one end of the cross cable into the Local Connection 3 NIC socket on the host and the other end into the NIC socket on the client. On the host desktop, right-click Network Neighbors to display the shortcut menu, and right-click Properties to display the Network Connections window. Hold down ctrl and press the ICONS of the two nics to select the two nics.
1, this situation is the problem of setting up, set up automatic connection can be. Confirm whether the WiFi itself is limited, can be replaced by other wireless network verification; Enter Settings -- System Management -- Backup and reset -- Reset network Settings -- Reset Settings; Note: Resetting network Settings will delete and disconnect WLAN, mobile data network, Bluetooth and other network connections and pairing records.
2, wireless router long-term work, power off, or your wireless router is faulty. Some mobile phone wireless function is questionableQuestion: If you change the phone connection can not be dropped, it means that your mobile phone wireless function is wrong, I have a mobile phone is the same. Check your phone's Settings. Android phones have a power-saving feature that automatically turns off wireless when you lock the screen.
3, may be you accidentally delete the phone wifi record, otherwise it will automatically connect.
4, if the mobile phone wireless network can not be automatically connected, you need to manually connect, it may be a wireless network problem, suggestion: open the Settings - WLAN-menu key - Advanced Settings - Set the network connection method - the "manual" to "automatic". Open Settings-WLAN- Click on the wireless network name - Forget - Reconnect attempt.
5, if the mobile phone wireless network can not be automatically connected, you need to manually connect, it may be a wireless network problem, suggestion: open the Settings - WLAN-menu key - Advanced Settings - set the network connection method - the "manual" to "automatic". Open Settings -WLAN- Click on the wireless network name - Forget - Reconnect attempt. Try to replace other Wifi environment.
6. For example, a common mistake is that a user makes a small mistake when entering a password, such as incorrect capitalization or special wordsThe confusion of symbols. This will cause the phone to be unable to connect to the WiFi network, requiring a manual password to connect. Software failure: If there is a problem with the phone's operating system or WiFi driver, it may also lead to an inability to automatically connect to WiFi. This can be caused by a failed software update, a virus attack, or corrupt system files.
1, choose meaningful and valuable gifts to pay attention to value, but not the more expensive the better, not the moreThe heavier the better, but choose meaningful and valuable gifts. For example, you can send some commemorative gifts, items with practical functions, etc.; Or choose some more special items, such as couple rings, couple pendants and so on. These gifts not only have collectible value, but also can be used as a witness of love. Giving gifts is not the more expensive the better, the meaning of the gift is far more important than the price of the gift. If your relationship is relatively new, giving a gift that is too expensive can make your girlfriend feel awkward and uncomfortable. Finally, consider the meaning of the gift. A good gift should represent your heartAnd emotions. For example, sending a heart-shaped pendant that means "I love you" or a love letter filled with your sweet words will make your girlfriend feel very touched. Buying a gift for your girlfriend is not the more expensive the better, the most important thing is to buy the right one. I am also a girl, I have always thought that in fact, the gift of prestige, really does not depend on the price behind the gift, the thought spent by the boys, is the fundamental gift, our girls are rare, is whether the boyfriend has a sincere and full of love, rather than the price of the gift.
4, and for girls, boys give me a gift, it is not necessary to send veryValuable, not all expensive things are the best, it is important to have a mind for girls, so that girls can sense the love of the heart in the gift. Give your girlfriend a gift is not necessarily the more expensive the better, the most important thing is your mind. First, if you choose a gift that your girlfriend doesn't like and doesn't do much for her, even if it's expensive, she won't be very happy. Second, if the girlfriend likes, or for her just lack of such a thing, even if the price is more favorable, she will feel that she has received a satisfactory gift.
Can electrical energy be transmitted wirelessly, and why? Researchers at the Massachusetts Institute of Technology in the United States recently advertised a way to deliver electricity, lighting a 60-watt light bulb at a distance of 2 meters. Scientists believe that the technology has the ability to carry electrical appliances that can be charged without connecting to a power cord. A related research article published recently by Marin Solgasic, professor of physics at the Japanese-American Institute of Technology, found the use of special energy. The principle is to make the charging device and portable small electrical appliances resonate at the same frequency.
The latest research results show that electric energy can be transmitted wirelessly, but compared with traditional wired (wire, cable), there are still many problems, such as complex transformation, large intermediate loss, transmission distance can not be too long, the need for linear transmission, and large interference to other equipment.
The use of wireless power transmission is even less feasible. It is not feasible to use wireless power transmission under high power conditions whether it is large-area transmission or laser-like transmission. The problem with large-area transmission is that a lot of power is wasted. The problem with centralized directional transportation is that it has unimaginable consequences.
Main router Wireless triple charge Wireless triple charge : - Connect a network cable to the WAN port of the optical cat. - Use another network cable to connect any LAN port of the main router to the LAN port of Optical Cat. - Power on the main router. - Use your browser to access the main router's Settings page Wireless triple charge , usually 19161 Wireless triple charge , enter the administrator account and password. - Select the correct Internet access method and enter your broadband account and password. - Set SSID and password for wireless network.
Primary router Settings: - Connect a network cable to the WAN port of the wireless router. - Use another network cable to connect the computer's network card to any LAN port on the wireless router and power on the router. - Enter your wireless router's setting URL in the address bar of your computer's browser, usually 19161 (see the label on the back of the router).
First, you need a router as the main router, this router is responsible for connecting to the Internet, its wireless triple charge his router withThe connection of. The DHCP service needs to be enabled in the router Settings (if you do not know how to enable the DHCP service, see the second method).
Sets the channel to be the same as the channel of the first router. At the same time, set the encryption information as the first router, and click "Save". 23 wireless routes How to bridge the network cable into the WAN port of the first router, and enter: 19161 in IE, Account: admin Password: admin Log in to the router to set WAN port, : WAN port set point wizard, enter the broadband network account, password, ADSL select: PPPoE.
The method is as follows: The first router is properly configured and can be connected to the Internet. Second router: The third router also changes the LAN port address and disables the DHCP function. After setting up the router, connect the LAN interface of the router in series with a network cable. Question 7: Is it OK to bridge three routers with one network cable? Yes, you can pay attention to DHCP and there will be no problem.