may be because you are not correctTo connect the Bluetooth headset to the mobile phone, you can delete the name of the Bluetooth headset that has been searched, and then reconnect; In addition, it may be due to the low power of the Bluetooth headset, failure or the reason for the low volume of the mobile phone media. Specifically: The phone is not connected to a Bluetooth headset. The solution is to re-pair.
Reason and treatment method: The wireless network distance is far, which will cause the earphone to receive a bad signal and will be a card. If the battery power is insufficient or the battery quality is too poor to lead to insufficient voltage, charge the headset or change the battery. If the WLAN of the phone is enabled,In the same frequency band as 4G WLAN, 4G WLAN may cause interference to Bluetooth, it is recommended to turn off the WLAN switch and try again.
Bluetooth headset battery is low. The Bluetooth headset is too far away from the phone or there is an obstacle in the middle. The Bluetooth signal of the mobile phone has a problem, the receiver has a problem, the quality of the headset is a problem, or it is knocked, touched, broken, and aged. Channel problem, signal interference or metal obstruction. There is a problem with the Bluetooth module of the mobile phone. Try another mobile phone or restart it.
should be that there is no real connection between this Bluetooth headset and the phonePower, so the Bluetooth headset can not listen to music. The specific connection method of mobile phone and binaural stereo Bluetooth headset is as follows: First step, turn on the Bluetooth function of the mobile phone, go in to search the status of the Bluetooth headset, and see any device. The second step, make the Bluetooth headset in the startup state, you need to long press the Bluetooth headset switch key for about 6 seconds.
Bluetooth headset can not listen to the general reasons and treatment methods: First, it is generally believed that after opening Bluetooth, the mobile phone can search for Bluetooth, and successfully connected with it, in fact, this is wrong. For the phone to find Bluetooth, Bluetooth must enter a special state: pairingStatus.
If the Bluetooth headset has been connected, and can talk normally, but can not listen to the song, you need to consider the following situations: Bluetooth headset is divided into mono and stereo two types, please first determine the type of Bluetooth headset. Mono Bluetooth headset: Only one headset, can not play music. Stereo Bluetooth headphones: Generally equipped with two headphones, you can wear both ears.
Problem with charger or charging cable, handThere's something wrong with the battery. Faulty charger or charging cable: Make sure you are using an Apple certified charger and charging cable and check for damage or wear. Mobile phone battery problems: Mobile phone battery has been aging or damaged, will also cause wireless charging can not work properly, the battery needs to be replaced.
The reasons for the failure of the Apple wireless charger are as follows: the short circuit causes the Apple mobile phone to not be charged, which may be caused by the short circuit of the charging interface. There are a large number of spring firing pins in the charging interface, which can make the line closely connected with the plug of the charging data line. But if these firing pins are bentThen it will lead to a short circuit, and the phone will not be able to charge.
This situation is mostly because the mobile phone fell to the ground to lead to the motherboard components out of welding, the probability is very small. If the battery is not charged and the motherboard is damaged, the store will charge you more than 500 so-called replacement motherboard fees, in fact, only need more than 100 replacement power IC is good. Non-original charger, charging cable damage this easy to do, ask people for an original iPhone charger and charging cable to try to know.
The reasons for the failure of the Apple 15 wireless charging may be as follows: The device is not aligned with the charger. If equipmentNot properly placed in the center of the charger, or there is a physical barrier, may cause charging failure. The charger is not connected to power. Make sure the wireless charger is plugged into the power adapter and connected to the power supply. The power adapter is faulty. If the power adapter fails, it may affect the work of the wireless charger.
When we use the Bluetooth headset for the first time, we need to connect the Bluetooth of the mobile phone, take the Bluetooth headset out of the charging case, long press the switch button on the back of the headset for two seconds, and the Bluetooth will automatically enterNormal pairing mode. When we use it in the future, because the Bluetooth has been paired, it will automatically remember that the pairing is successful, so the next time you use it, just take the Bluetooth headset out of the headset box, and the Bluetooth will automatically match and connect the headset within 1 to 2 seconds.
Power on: First of all, ensure that the left ear and right ear of the tws wireless headset are powered, if the power is insufficient, you can put it in the charging box first, when the power is enough, take out the two headphones, you can see that the side of the headset will have a white button, which is the power button of the headset, and press and hold the button for 3S.
Press Answer key:First, press and hold the answer button of the Bluetooth headset until the light flashes red and release it. Turn on Bluetooth: Then turn on the Bluetooth on the phone, then the Bluetooth headset and the phone will enter the pairing again, and the previous connection does not need to be paired. Connection: Finally, after the Bluetooth device signal is displayed on the phone, click the connection to use it.
The Bluetooth headset touch key is usually located on the headset housing and can be operated by tapping or sliding. Touch key location: The touch key of the Bluetooth headset is usually designed on the headset housing, which is convenient for users to perform various operations. The exact location may vary by brand and model, but it is generally labeled on the headsetWired charging is similar, but only the wireless charging case version of the AirPods and AirPodsPro support wireless charging function, and the use of wireless charging function also requires an additional wireless charger. Put both AirPods headphones into the earphone charging case, put the charging case in the inductive area of the wireless charger to charge (the charging case will show an orange indicator when the induction is successful), double-click the charging case will show the indicator status.
First connect the wireless charger to the power supply, that is, plug the phone charger into the wireless charger; Then, put the wireless charging case on the wireless charger, justYou can charge wirelessly. As for charging, whether to put the airpods in the charging case mainly depends on whether the headphones are charged, and whether you need to use them. If both the headset and the charging case have no power, the headset will be charged first, and then the charging case will be charged.
Earphone charging: When the earphone is not in use, please put the earphone in the charging case and close the cover. The charging case will automatically charge the earphone. Charging box Charging: Wired charging: The charging box can be connected with a charger, mobile power or computer using a USBType-C data cable for charging. Wireless charging (wireless charging) : Please adjust the charging casePlace the center of the lower part of the charging box at the center of the wireless charger, and the indicator light indicates that it has been charged normally.
The procedure for wireless charging a Bluetooth headset is as follows: Prepare materials such as a charging power supply, a USB cable, and a Bluetooth headset. Remove the headphones when they run out of battery. Place the headphones in the charging bin, either individually or individually. Close the cover of the charging bay. If the charging bay shows green, it indicates that the charging bay has electricity, put the headset into the charging, and the red light stops blinking, indicating that the charging is complete.