Prepare a working wireless Bluetooth speaker to ensure that the power supply is sufficient, and then press the power button at the top to turn on the speaker, as shown in the picture. 2. Open the home page of mobile phone Settings, as shown in the picture, find the "Bluetooth" option, and click to enter. After the screen is displayed, select Bluetooth to enable the Bluetooth function of the mobile phone. Then find the model number of the several electronic devices shown, find the name of the Bluetooth speaker, andClick Pair.
You can view the following methods: Set the power prompt tone: Currently available models support the charging prompt tone, turn on the notification volume, connect the charger, do not support the setting of custom charging prompt tone. Set the prompt tone after the phone is fully charged: After the phone is fully charged, a notification notification will be displayed indicating that the charge is complete. Some models will sound a notification tone when the phone is fully charged.
General Bluetooth speaker first charge takes 2-3 hours. A fully charged Bluetooth speaker can be used for 9-10 hours. When charging, it is best to shut down and charge, one is good for the battery of the Bluetooth speaker, and the other is faster to charge. Generally speaking, the red light means that it is charging, and the green light means that it is full. If it's always red (Charging more than 3-5 hours) indicates that your speaker charging circuit has a problem, or does not have a full charge stop function.
The first charge is best after the power is used, charge 5 to 6 hours and then charge 1 hour so that the battery life is best. My daughter-in-law used the music canvas, bought last year, she did not pay much attention to the maintenance of the battery, a few days ago I used it to feel full or can last four or five hours, this brand of battery quality is really good ah.
Now most of the batteries in the speaker are lithium batteries, and a few are also useful for lead-acid batteries, as long as they are full to 100%, it is OK.Battery use and maintenance, no special requirements, but pay attention to one point, do not over discharge, over discharge has the greatest impact on battery life.
V. Plug these values into the formula, it can be obtained: charging time = (1000mAh ÷ 5W) × 5 ≈ 300 minutes (that is, 5 hours) Therefore, when using a 5W output power charger for a Bluetooth small speaker with a battery capacity of 1000mAh to charge, it takes about 5 hours. However, the actual charging time may vary due to factors such as the charging environment, battery status and charger qualitySame.
Five or six hours, more charge for the battery life is better. My husband used the music canvas, bought it last year and he didn't maintain the battery, but I used it and it still got four hours of battery life when it was fully charged.
The connection method is as follows: Turn on the speaker switch and Bluetooth mode: Find the power switch on the speaker and turn it on. Find the button or function key that is pressed or switched to Bluetooth. It is at the top, side, or bottom of the speaker.Turn on Bluetooth in Phone/Computer Settings: On the phone or computer you want to connect to, go to the device Settings screen. Look for the Bluetooth (or "Bluetooth") option to turn on.
Charging port and switch key in the lower part of the audio, in addition, the operation of the audio body is extremely simple, on this key, short press is to turn on the audio, long press is to turn off the audio, there is no button to adjust the volume, if you want to adjust the volume, you need the phone to connect the audio Bluetooth first, and then adjust the volume key of the phone.
The soft lighting provides convenience for creating a comfortable living atmosphere. Wireless phone charger available 10WMAX wireless charging, built-in security monitoring system to ensure the safety of mobile phone charging process. "Leisure Summer" theme Bluetooth speaker, from the appearance level to quality, meets people's expectations and needs for summer life in an all-round way, adding peace of mind and comfort to life. EZVALO is committed to creating more quality products and looking forward to bringing better life experience to more consumers.
In terms of accessories, the Bluetooth speaker, the manual and the 2-meter A-C charging cable form the basis, but the lack of power is A small pity. But considering the convenience of wireless charging, this small loss seems reasonable. Speaker body adoptsNon-woven transparent cloth design, simple without losing the texture, the bottom of the silicone mat and passive unit voice space reflects the design of detail.
As a user with strict standards for lighting, I have selected from high-end RAMUN amuleto and ThinkPlus, Benq Wit and other brands, but the products can provide no less than these big name light experience at a affordable price. For example, the smart lamp series of several lights, the main bedside atmosphere lamp function, and even the Bluetooth speaker and wireless charging in one /, make life more convenient. The design of several smart desk lamps is more unique. <
1, good. Lingxi-by-electric induction speaker, using new black technology, mobile phone close can sense mobile phone audio signal, 15W wireless charging, say goodbye to cumbersome, put on the charge. The sound quality is good, the effect bar, the phone directly control the volume is very convenient.
2, this audio subwoofer is very good, sound quality is great. The shock film of the new sound is still relatively hard, so the sound is not recommended to open too big, until the sound is used for a long time, after the shock film is soft, the sound is louder, and the sound effect will be more excellent. And the installation of this sound is also very simple, almost study yourselfIt can be installed. The price is not too expensive, so it is very cost-effective.
3. In the induction mode, the mobile phone that plays music or video can be placed on the stand to achieve the amplification effect Modern wireless speaker ; Switch to Bluetooth mode can be transformed into Bluetooth speaker, support Bluetooth 1 modern wireless speaker ; The support part of the small barbour demon is a mirror, and supports wireless charging, the maximum power can reach 15W, and the charge can bid farewell to anxiety. The base part of the Barbarian draws on the retro lampshade design,The built-in adjustable night light accompanies you to sleep with music.
4, Mi 9 sound quality is very good, worth buying. The Mi 9's sound cavity is designed using Bass material, which, according to official data, can achieve a large volume equivalent to 0.9CC. The interior volume of the speaker at the bottom of the Mi 9 body is very large, which is due to its use of 12x17 high-quality ultra-linear speakers, which is one of the largest speakers in all flagship models.
5, Bo Yue PRO for the front passenger provides a set of USB interface, its front storage slot is also set up wireless charging panel, in addition toThere is a Type-C interface and a 12V power supply. However, some owners have proposed that there are defects in the design of the USB interface, which makes it inconvenient to put the phone. In terms of configuration, the new car also has several highlights. The first is the BOSE speaker, which creates a perfect music experience for customers and enhances the sense of grade.
6, the running-in period has not tried to exceed 100 per hour, unconsciously to 100. It's light. The steering wheel is light and accurate. Not a good judge of position when backing up. The temporary average fuel consumption is 5 sound insulation needs to be improved, and the sound at this price is general. Avant-garde fashion, turn headsPretty high. But this look many people can not accept, too sharp. Fine workmanship for the price, an 8-speed wave case, everything is fine.
2, the charging method is as follows: Modern wireless speaker : Place the charging base Modern wireless speaker : Place the speaker on the charging base. The charging dock will provide a charging area, just place the speaker exactly on that area. Connect the charging cable: Plug one end of the charging cable into the charging port of the speaker. The charging port is located on the bottom or side of the speakerThe corresponding interface can be found according to the design of the speaker. Connect to the charging base: Insert the other end of the charging cable into the corresponding port of the charging base.
3, USB charging. Find the audio USB port and plug in the data cable jack end. Plug the charging end of the charging cable into the phone to charge it.
The charging method is as follows: Place the charging base: Place the speaker on the charging base. The charging dock will provide a charging area, just place the speaker exactly on that area.Connect the charging cable: Plug one end of the charging cable modern wireless speaker into the charging port of the speaker. The charging interface is located at the bottom or side of the speaker and can be found according to the design of the speaker. Connect to the charging base: Insert the other end of the charging cable into the corresponding port of the charging base.
LED wireless charger Bluetooth speaker to charge the mobile phone method is as follows: ensure that the speaker is connected to the power adapter, the speaker itself is fully charged. Find the wireless charging area on the speaker, on the top or side. Place the mobile phone that supports wireless charging function on the wireless charging area to ensure that the handThe back of the machine is in contact with the charging area.
There are many charging methods for Bluetooth audio, the most common method is to use a USB power adapter or use a charging treasure to charge. Use USB power adapter to charge: Connect the USB power adapter to the power socket Connect the USB cable to the charging port of the Bluetooth speaker, insert the other end of the USB plug into the USB power adapter to start charging, wait for the Bluetooth speaker indicator to turn green, indicating that the charging has been completed.
Method 3: Using a Mobile power supply If you are outdoors or traveling, you cannot use a power adapter or wireless chargeElectrical appliances, then the use of mobile power is also a good choice. First, we need to prepare a mobile power supply and a Micro USB data cable, insert the data cable into the charging interface of the small Bluetooth speaker, and then insert the other end of the Micro USB cable into the USB interface of the mobile power supply.
USB charging. Find the audio USB port and plug in the data cable jack end. Plug the charging end of the charging cable into the phone to charge it.
Wireless Bluetooth speaker how to charge Modern wireless speaker ? Generally buy Bluetooth voiceWhen the box, accessories have their own charging cable, Bluetooth speaker has a charging USB interface, the USB port of the charging cable is inserted into the charger, and the other end is inserted into the interface on the Bluetooth speaker.