New energy vehicle charging piles are similar to gas stations, usually installed on the ground or wall in public buildings or residential parking lots and charging stations, and only need to plug the charging line into the car to start charging.
< br >
The following is about the charging pile problem:
< br >
1. The charging pile is directly connected to the AC power grid for the input end of various types of electric vehicles according to different voltage levels, and the output end is usually a charging plug, and the electric vehicle can start charging by plugging in the charging plug directly;
< br >
2. After plugging in the charging cable, it will show that the electric vehicle is successfully connected to the charging pile. After charging, you can click to stop charging, and then unplug the charging pile immediately;
< br >
3, the payment method is usually able to use after the first scan code attention, and eventually can deduct the relevant charging costs.
Storage of new energy charging pile charging is very simple, first of all, you need to plug in your battery corresponding power supply, and then plug into the charging pile, connected after the battery can be charged.
Ensure that before and after the battery is charged, the indoor ambient temperature is between 19°C and 30°C, so that the charging efficiency is the best, in the case of battery capacity greater than 1000mAh, it is recommended to use 1A charger to charge, if the capacity is less than 1000mAh, it is recommended to use 0.5A charger to charge better. In addition, care should be taken to avoid overcharging the battery, which is conducive to protecting the battery life.
one
Charging method The charging method of the new energy electric vehicle charging pile has three charging methods: pre-charge, fast charge, and supplement.
Precharge is to charge with a small current first, and then charge normally when the electricity meets certain conditions.
Fast charging is fast charging, that is, charging with DC high current, which can quickly restore battery energy.
How to charge the new energy storage charging pile is as follows:
01 Before charging
< br >
1, check the surrounding environment, there is no flammable and explosive items;
< br >
2. Confirm that the charging gun is connected in place;
< br >
3. Do not touch the hole of the electric gun and the jack of the vehicle socket with your hand.
< br >
02, charging
< br >
1. Correctly operate the charging pile according to the instructions;
< br >
2, check whether the charging pile display is normal, whether there is current, voltage, etc.;
< br >
3. Do not pull out the charging gun during charging;
< br >
4. Do not start the car during charging.
< br >
03, after charging
< br >
1. Confirm that the charging pile stops working;
< br >
2, pull out the charging gun, put the charging gun back to the charging port; 3. Seal the electric vehicle charging port; 4. Tidy up the charging site.