Honda Ling Pai induction wiper Ling Pai changeOpen and use methods of installing wireless charge ① Turn the joystick back to the driver's direction Ling Pai modified wireless charge , spray glass water on the front windshield wiper. ② The default position is AUTO, when the vehicle senses the increase of rain, the wiper will automatically work. The adjustment button on the right adjusts the sensitivity of the rainfall sensing. ③ The lower the wiper switch, the faster the frequency. Low gear means low gear, high gear means high gear.
② The default setting position is AUTO. When the car senses the increase in precipitation, the wiper is fully automatic. rightAdjust the button to adjust the sensitivity of the rainfall sensing. ③ The more pressure on the wiper power switch, the faster the frequency. LO means low gear, HI means fast gear. ④OFF switch is to turn off the power switch, without the wiper is screwed to this part.
First, spray the cleaning solution when pulling the control lever towards the side of the body; Secondly, move the control lever up and down to adjust the desired wiper frequency; Finally, adjust the control lever to OFF and clean it. Note Ling Pai modified wireless charge : When spraying cleaning solution, release the control lever for more than 1 second, it will stop spraying cleaning solution and scrapeThe water applicator will be wiper another 2-3 times to clean the windshield and then stop.
Check the area in the middle of the upper front windshield for any dirt. That area is the sensor area of the automatic wiper, and sometimes some oil stains or mud spots may make the sensor area make the wrong judgment, so as to start the wiper. As for the interval, check that the interval adjustment gear on the wiper handle is set to the fastest.
In the security configuration, Ling Pai is unique. It is equipped with automatic sensor wiper function, through the built-in sensor to continuously monitor the rainfall, intelligent adjustment of the wiper speed, indeedEnsure that the driver can maintain a clear vision in rainy days, improving driving safety.
1, Honda Ling Pai luxury version connected to the mobile phone method is very simple. First, make sure Bluetooth is enabled on your phone. Second, find and turn on the wifi button in the car navigation. Next, the phone is paired with the Bluetooth of the car navigation system to realize the display of its name and pairing password on the car navigation interface. In order to successfully connect, you also need to turn on the phone's data connection and personal hotspot functions.
2, turn on the Bluetooth on the mobile phone, turn on the wifi button on the car navigation, and the two can be connected if matched. Turn on the phone's data connection and personal hotspot functions. So that when the car machine system opens the wireless wifi, it can smoothly find this mobile phone to achieve interconnection. The wifi connection password is a string of English letters at the bottom of the personal hotspot screen. Turn on wireless wifi in the car system, search for the phone and enter the wifi password to connect, as described in step 2.
3, can sense whether the trunk has a key; The trunk won't close with a key in it!There's a notch just above the multimedia screen, just right for the phone. The phone holder of the suction cup is a very chicken thing, and it is easy to be shaken off on other cars; But it works really well in bullying. Keys in the car don't lock the car automatically.
4, car WiFi can allow passengers to connect to the wireless network in the carriage, is a special Internet access equipment for public transport vehicles such as buses, private cars, cruise ships, WiFi terminals through wireless access to the Internet to obtain information, entertainment or mobile office business model. The car WiFi hotspot has the same function and the same use method as the ordinary WiFi hotspot.
1. The trunk switch of Honda Lampai is located on the driver's left foot. The 2019 Honda Lampai trunk volume is 561L. Honda Ling Pai open the trunk method ① light lift the trunk button Ling Pai modified wireless charging , the trunk lid can be successfully opened. ② You can also unlock the trunk through the car key. Press the button on the wireless key at least onceSecond Ling Pai modified wireless charge , the trunk lid immediately moves from the lock and springs up a seam.
2, Honda Ling Pai trunk switch is located in the driver's left foot position, providing the owner with Ling Pai modified wireless charge a convenient way to open. The trunk volume of the 2019 Honda Ling Pai reaches Ling Pai modified wireless charger 561L, providing sufficient space for storing luggage items. Honda Lampai Trunk opening method Honda Lampai trunk can be passed through a variety ofEasy way to open. First, the owner can gently lift the trunk button, and the trunk lid will automatically open.
3. The trunk switch of Honda Ling Pai is located on the left foot of the driver. The 2019 Honda Lampai has a trunk volume of 561L. Honda Ling Pai trunk opening method ① gently lift the trunk button, the trunk lid can be successfully opened. ② You can also unlock the trunk with your car key. Press the button on the wireless remote key for at least one second, then the trunk lid automatically unlocks and pops out a crack.
4, Honda Ling Pai trunk can be opened in a variety of ways: lightLift the trunk button: Just lift the trunk button, the trunk lid can be successfully opened. Car key open: Press the button on the key of the wireless remote control for at least one second, and the trunk lid then moves to open the door and spring up a slit. Magnetic induction on: Through the magnetic induction function of the key (within 1m distance), the trunk power switch can be directly driven.
5, when the Ling Pai modified wireless charge You need to open the trunk of the Honda Ling Pai, just gently press the trunk button located at the rear of the vehicle, you can smoothly open the trunk lid. If you're inclined to useA condition in which the road is burned out and unusable.
2, the use steps are as follows: Place the mobile phone or device on the charger that supports NFC wireless charging, and ensure that there is enough contact area between the device and the charger. The charger sends an NFC signal to the device, and the device receives and recognizes the signal. The device sends a request to the charger to start charging. The charger will start sending a wireless charging signal to the device, which will receive it and start charging.
3. In addition, if the phone has NFC function and is continuously turned on, the card may be constantly recognized, which may cause some inconvenience, but does not cause demagnetization. It is important to note that if the phone supports wireless charging and the card with the magnetic strip is charged together in or near the phone case, then demagnetization may occur. In addition, cards using RFID technology, such as bus cards, are not affected by the phone and can be safely placed on the back of the phone case or phone.