1) Water into the pot, first connect the power cord with the pot body, and then plug the other end into the power socket, you can heat. For the electric kettle with a switch or automatic type, the switch should be unplugged to make the kettle connected to the power supply. It should be noted that do not turn on the power first and then fill the water, otherwise it will burn out the heater or cause dangerous accidents.
(2) Water injection should not exceed the highest water level, so as not to overflow the kettle when the liquid boils. The use of ordinary electric kettle, water should not be too little, otherwise it will soon burn dry, if the electric heat pipe comes out of the water, it is easy to burn out.
< br >
(3) The rated power of the electric kettle is generally large, and the capacity of the power plug, socket, and power cord should be selected appropriately, which should be above 10-15 amps, and should be used independently to ensure safety.
< br >
(4) Always keep the power plug, socket, power cord and automatic switching device of the electric kettle dry and clean, do not use water shower to wash, so as to avoid damage to electrical insulation due to moisture, cause failure and leakage.
< br >
(5) It is easy to cause harm to flush water or drink with an electric kettle that is still connected to the power supply after boiling. The plug should be unplugged first, and the power supply should be cut off before using boiling water to ensure safety.