1. The use method is as follows: After plugging in the power supply, touch the arc light pole with your finger at any position to light the light. Put the device that needs to be charged under the light and turn the phone to noneIn line charging mode, put it into the wireless charging induction area of the lamp. Use the phone charging cable to connect the lamp USB port to the phone, and the phone can also be charged.
2, How to use Huawei wireless charging lamp? In addition to being able to turn on and off by touch, there are more detailed adjustment functions on its panel. With a finger swipe, you can adjust the brightness of the light stepless, and the experience is exactly the same as adjusting the brightness of the mobile phone. Moreover, because this operation does not involve mechanical movement, there will never be wear and aging. The experience is the same no matter how long you use it.
3, wireless devices also need power support, but if you can charge wirelessly, you do not need to plug in. The principle of wireless charging lights is to use wireless current. The voltage is placed on a fixed charging device for charging. But the charging disc still needs to be plugged in. That's why he charges the wireless charging light. There are many charging devices like this, such as mobile phones can now also achieve wireless charging.
4, on its flat and smooth base panel, you can't see a protruding button, but there is a bold and simple icon, which is just like a mobile phone, and you can start it with a gentle touch of your fingerThe voltage is higher than the voltage of the battery to charge normally, when you unplug the power, then the lamp uses the battery electricity, so the brightness of the lamp should be slightly lower.
watts. According to the query NetEase, the hw803 wireless charging desk lamp has a large output power and uses a 10-watt charging head.
1, because the lamp wire is damaged. Charging desk lamp unplugged charger is not bright because inside desk lamp wireless charging desk lamp disassembled power storageThe pool capacity is seriously reduced and the electrolyte dries out or is damaged, resulting in the wireless lamp disassembly . Two possibilities wireless charged lamp disassembly , a wireless charged lamp disassembly , the charging indicator is broken Wireless charged lamp disassembly , but does not affect charging two, the charging circuit is broken, has not been charged, can only be used directly in addition, If the rechargeable battery is broken, the charge indicator is still on.
2, on its flat smooth bottomOn the panel, you can't see a protrusion button, but there is a striking and concise icon, which is like a mobile phone, and you can light up instantly by gently touching the power button with your finger, and the operation of shutdown is the same.
3, the power is too low. Wireless charging desk lamp flashing is too far away from the electric disk, should be put closer. It is also possible that the input voltage is unstable. It's simple. Discharge regularly. For example, every month, if there has been no power failure, do not plug in the AC plug, turn on the light, until the light is not bright, indicating that the electricity has been discharged. Plug in the AC power. You can replace it with a longer oneWire plate to solve the problem of false contact.
4, when you are charging, then the voltage of the charger is used, the voltage of the charger is higher than the voltage of the battery to charge normally, when you unplug the power, then the lamp uses the battery electricity, so the brightness of the lamp should be slightly lower.
5, very simple, regular discharge. For example, every month (if there has been no power failure), do not plug in the AC plug, turn on the light, until the light is not bright, indicating that the electricity has been discharged. Plug in the AC power.
6, wireless devices of course also need power support, but if youIf you can charge wirelessly, you don't need to plug it in. The principle of wireless charging lights is to use wireless current. The voltage is placed on a fixed charging device for charging. But the charging disc still needs to be plugged in. That's why he charges the wireless charging light. There are many charging devices like this, such as mobile phones can now also achieve wireless charging.
Battery is too low. Wireless charging desk lamp flashing is too far away from the electric disk, should be put closer. It is also possible that the input voltage is unstable. It's simple. Discharge regularly. For example, every month, if there has been no power failure, do not plug in the AC plug, turn on the light, until the light is not bright, indicating that the electricity has been discharged. Plug in the AC power. You can change a longer plugboard to solve the problem of false contact.
Because the lamp cable is damaged. The charger of the charging lamp is not bright because the battery capacity inside the lamp is seriously reduced and the electrolyte is dried out or damaged. Two possibilities, one, the charging indicator is broken, but does not affect the charging second, the charging circuit is broken, has not been charged, can only be used directly power supply in addition, if the rechargeable battery is broken, charging refers toThe indicator light is still on.
This kind of music desk lamp generally can not wireless charging mobile phones, now wireless charging words only that kind of small disc, like you this kind of music desk lamp, it must still need a line connection, there is no connection then it must be that, well, there is not much of the role, so you still need to pass a certain connection. Technology that uses magnets to charge devices.