1, yes, this socket can generally be called the wall switch base, it is usually without a wire and plug, need to be installed on the wall and connected with the wire to use. The wall switch seat is generally divided into two types of single hole and porous, and the socket with different hole positions can be selected according to the need. The main advantages of this wall switch seat are simple operation, flexible use, can be installed in any position according to actual needs, and occupy a small space, beautiful.
2. What is a socket without a cable? An outlet without a cable is called a mobile outlet. The selection of skills depends on the brand data is not completeStatistics, there are more than 1500 enterprises in the production of switch socket products, the quality difference between products is huge, because many ordinary consumers do not have the method to identify the advantages and disadvantages of products, coupled with the limited understanding of the switch socket brand, to some illegal businessmen to bring living space, some fake and shoddy products into the market.
3, no cable socket, we call wireless socket. It's a separate outlet, no power cord attached. Socket purchase skills Introduction Socket purchase skills General good product appearance smooth, no burrs, bright color and its material using high-quality abs PC material, flame retardantCan be good, not breakable.
4, no cable socket, we call wireless socket. It's a separate outlet, no power cord attached. Cable socket with power cord.
5, there is such a strip, but this strip is called a converter; This kind of socket, a plug behind, wireless, the front can be 2 three holes, there are also 3 three holes, the quality is very good. Precautions for the use of the insert disk: before the use of the insert is purchased, here are a few indicators that need to be considered in the purchase of the insert, only for your reference.
6, the strip, also called the patch board, belongs to the socket, there is no areaPlug in a converter wall wireless charger , then plug the required plug into the converter. Use an outlet extension cord: If you need to move the outlet to a more convenient location wall wireless charging , you can use an outlet extension cord. This method allows you to move the socket to a more convenient location without damaging the wall.
Changing the socket position in a hardcover room without harming the wall can be done in the following ways: ** Using an outlet converter ** : This is an easy way to convert an existing outletFor the type of socket required, no need to damage the wall. ** Use an outlet extension cord or expansion board ** : If the outlet is not conveniently located, you can use an outlet extension cord or expansion board to move the outlet to a more convenient location.
Therefore, if you want to increase the socket without destroying the wall, it is better to install a bright box socket that protruding from the wall, and only need to connect a new line in the main line of the original socket.
1, if the wall does not have a line, do not worry, you can use several methods to solveUse wireless remote control: you can choose to use a wireless remote control to control the switch and color of the light belt, so that there is no need to lay wires on the wall, and it will not affect the beauty of the wall.
2, the use of wireless battery-powered light with wireless battery-powered light is a very convenient solution, its built-in battery can be continuously powered, without the need for external power supply. This light belt is usually equipped with a remote control, which can control the switch, brightness and color of the light. Solar strips use the sun's rays to charge, so you don't need to use electricity at all.
3,Is the wall light slot or the top slot, if it is the wall slot using the track to make a decorative curtain can be first of all, we take a look at the principle of self-pasting wallpaper, it is very convenient to use, a person can be pasted on, it is behind with glue, remove the coating can be pasted on. It's a back adhesive product, and it's very gelatinous.
4, before installing the wall light belt, you need to install the wire tube. A wire tube is a protective sleeve that holds the wire and protects its surface, usually installed behind or inside the wall. Insert the wire tube into the installation position as a reference, and clamp the wire tube with pliers or tools. If there is no line tube, you can use a pencil or other tool on the wallSmall holes are dug into the face to place the wires. The circuit connection connects the wire of the wall lamp belt to the power cord.
5, you can use a soft brush or clean cloth to wipe the surface of the lamp to maintain the quality and brightness of the light. In addition, it is also necessary to pay attention to check the state of the power cord, especially whether the plug is damaged or loose, to ensure electrical safety. In short, the installation of light strips on the wall is a very good decoration choice.
6, all the spotlights and living room lights, the power neutral line are connected together, directly connected to the power box on the neutral line, and then according to each switch control several spotlights, willThese several spotlight power control lines are connected together, there are several groups of spotlight control lines, and they are led to the switch box with the living room lights, according to the number of control spotlights, add the light control line, install the light switch. The thread is generally left 20 cm.