First, understand how wireless charging works. The wireless charging system mainly consists of two parts: the transmitter (usuallyOn a charging pad or charging dock) and a receiver (installed inside the phone). The transmitter generates a magnetic field, which the receiver converts into electricity via induction to charge the phone's battery. To add wireless charging to a regular phone, the most critical thing is to install a wireless charging receiver.
You can buy a wireless charging receiver, stick it on the back of the mobile phone or insert it into the mobile phone charging port, the advantage of this method is that the cost is low, there is no need to replace the mobile phone or dismantle the internal phone, the disadvantage is that it may affect the beauty and feel of the mobile phone, as well as increase the wear and tear of the charging port.
Mobile phone wireless charging technology is completely without the use of wires, the use of magnets for mobile phone charging technology. Mobile phone wireless charging technology, derived from wireless power transmission technology, uses magnetic resonance to transfer charge in the air between the charger and the mobile phone, coil and capacitor form resonance between the charger and the mobile phone, to achieve efficient transmission of electric energy technology.
Wireless charging technology is completely without the use of wires, the use of magnets to charge the device technology. Wireless charging technology, derived from wireless powerTransmission technology, the use of magnetic resonance in the air between the charger and the device to transfer charge, coil and capacitor form a resonance between the charger and the device, to achieve efficient transmission of electric energy technology.
The current generated by this induction can be used to charge a mobile phone. The charging efficiency of a wireless charger depends on the design of the magnet and coil and the match between the phone and the charger. If the match between the magnet and the coil is not good, or the size of the phone and the charger do not match, then the charging efficiency will be reduced, or even unable to charge.
Electromagnetic induction wireless charging: This way of charging is the use of aThe induced magnetic flux generated between the magnet induced on the wireless charging board and the mobile phone converts this magnetic force into an electric power for current transmission.
2. Plug the magnetic charger into the power socket and turn on the power switch. Place the phone on the charger and make it fit tightly to the charger. Wait a few seconds until your phone starts charging. When charging is complete, turn off the power switch of the charger. It should be noted that magnetic chargers can only be used for specific models of mobile phones, and different brands of mobile phones may require different chargers.
3, the mobile phone standard charger and data cable connected to the wireless charger, and then put the mobile phone is uprightOr horizontally placed in the center of the wireless charger base, wireless charging can be achieved, the indicator light will have a breathing effect, 5 seconds after the extinguish, plug and play, convenient and quick.
4, wireless magnetic charging technology is a convenient way to charge, it uses the magnet suction to the charger and the device closely fit, at the same time through the wireless charging technology to provide electrical energy for the device. This technology combines the convenience of wireless charging with the stability of the magnetic design, so that users do not need to precisely align the charging interface, just hold the charger close to the device, and they will automatically adsorb together to start charging.
5, ** correctIdentify device support ** : First, ensure that your Huawei devices (such as mobile phones, tablets, etc.) support the magnetic function. This usually means that there is a magnetic area on the back or side of the device, or that magnetic is supported through a specific phone case. ** Prepare magnetic accessories ** : Prepare magnetic accessories, such as magnetic charger, magnetic charging bank, magnetic holder, etc. Make sure these accessories are compatible with your Huawei device.
6, magnetic wireless charging: This is a magnetic way to achieve mobile phone wireless charging technology. A magnetic charging case or charging case is required, and after the charging case or charging case is installed on the phone, it can be replacedThe mobile phone is placed on the charging base that supports magnetic charging, and the mobile phone and the charging base are connected by magnetic adsorption, and wireless charging is carried out.
The use of magnetic charging treasure is to suck the magnetic charging treasure on the back of the mobile phone to carry out wireless charging. When using the magnetic charging bank, ensure that the magnetic charging bank has sufficient power. If you use it for the first time or do not use it for a long time, you need to fully charge the magnetic charging bank. Insert the cable of the magnetic charging bank into the power adapter or USB port of the computerYes. The magnetic charging bank is attached to the charging port of a mobile phone or other device.
Wireless charger usage: the mobile phone standard charger and data cable connected to the wireless charger, and then the mobile phone is placed (vertical) or horizontally in the wireless charger base left and right center position, you can achieve wireless charging, the indicator light will have a breathing effect, 5 seconds after the extinguish, plug and play, convenient and quick.
Wireless charger usage: the mobile phone standard charger and data cable connected to the wireless charger, and then the mobile phone is/horizontally placed in the center position of the wireless charger base, wireless charging can be achieved, the indicator light will beBreathing effect, extinguished after 5 seconds, plug and play, convenient and fast.
Magnetic charging method: Pull the magnetic charging bank to the back of the phone, and the charging animation will appear on the main screen of the phone and display the power ring. Magnetic charging cable, also known as magnetic charging cable, magnetic charging cable, magnetic charging cable, magnetic charging cable, magnetic data cable, etc., is a convenient way to charge. It uses the magnetic principle to achieve automatic adsorption near to solve the problem of manual alignment for traditional wireless charging.
The guide sheet is better, the iron sheet is cheaper. The pilot disc is better. The magnetic guide adopts an opaque material of a primary color silver, which belongs to stainless steel products. Magnetic diskette is mainly used in mobile phone products. Iron sheets are cheaper.Iron can't be charged wirelessly. So it must be better, but the price is cheaper.
can be added. iPhone EXsMAX wireless charge can be added to the magnetic disc, because iPhone ExsMAX supports magesafe, and magesafe contains the magnetic disc, which just supports the wireless charging of iPhone, so iPhone ExsMAX wireless charge can be added to the magnetic disc.
This is because if the magnetic sheet is too thin, it will cause magnetic saturation problems. If magnetic saturation occurs, the inductance of the coil will suddenly decrease, which may result in a negative reactionThe wireless charging process creates obstacles.
Then, I tried the magnetic guide with a magnet, the result is still frequently broken charge, customer service explanation may be the output power problem. When consulting other brands such as Bex, benks, Belkin and Momis, the answers were disconcerting. Finally, I even found a Blue Star magnetic charging bank in a mobile accessories store, which can be charged wirelessly without the device, but without the magnetic function.
In fact, the mobile phone itself has magnets, to achieve some functions, such as wireless charging, will be affected by strong magnets. For magnetic smaller magnets (such as mobile phone holstersThe small magnetic block on the magnetic mobile phone holder, etc.) generally does not affect the function of the mobile phone. The smaller magnetic magnet has no effect on the circuit board GSM signal and GPS navigation signal.1, no magnet in the wireless charger. If you place an energized wire on a magnetic compass, you can see that these currents also produce a magnetic field. If you use a moving magnet instead of an alternating current wire, then you are ready to assemble the magnet wireless chargerng> Now. The varying currents in the wires create varying magnetic fields. The changing magnetic field creates an electric current in the other coil. The more loops you create, the stronger the effect.
2, first of all, cut the USB charging cable into two sections not far from the two ports. Use scissors to separate the tail glue of the two wires into a section to screen and then cut off the green wire with a double bottom line. Use hot glue to attach the magnet to the charger. Wrap the wires in the USB with tinfoil. Then wrap the wires and roll them up with copper wire. The USB cable with the copper wire rolled up is then wrapped in electrical tape.
3, nowThe most common wireless charging method is magnetic resonance charging. The use of magnetic resonance technology principle, junior high school logistics textbooks have some knowledge, simply put: electricity generation, magnetic generation magnet wireless assembly ! The magnetic field generated by the coil is then converted into electricity by the receiving coil, which is why this wireless charging device often carries a thick base and a "phone case".
4, the use of Apple magnetic charging method is very simple: align the back of the phone with the magnetic charger, the magnetic force between the two will automatically adsorb together, start wireless charging. magnetThe working principle of charging: magnetic charging technology is mainly the use of magnet male and female suction to achieve the effect of charging. The design of this magnetic charger is very convenient, just align the back of the phone with the charger, and the magnetic force between the two will make them automatically adsorb together.
5, Yes, but not too long. Too long affects the overall performance of the machine.
6, security is not high: in our lives, whether on the table, bed or bag is full of scrap iron filings, magnetic data line because the connection is the magnet, there will always be a lot of iron filings, in the long run in the charging port connection position will accumulateSave some iron filings, inadvertently may cause short circuit of the data line light burned the charger burned the IC power supply chip of the phone.