1, may be out of power, the protection state is blinking. 20W millet wireless charger packaging or the past millet has always been simple white packaging, the front of the package in addition to the appearance of a wireless charge, there is no other introduction. There is almost no content in the package, only the name of the product on the side of the package: Millet wireless charger.
2, charger and mobile phoneThe distance between is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose. The interface of the wireless charger must be correctly inserted into the power socket, and if the interface is loose, the light will always flash. There is a problem with the charger.
3, can be out of power, the protection state is blinking. When the millet wireless charger, millet wireless charger (universal fast charging version) LED light status is green flashing, millet wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove itIf an incompatible phone is charged, it will not be able to charge. Therefore, you should understand the compatibility of the charger before buying.
3, charging cable problem The data line is in poor contact, it is recommended to use a new line or use the original data line. When the charging treasure is sold, it is generally equipped with a charging cable. When the charging treasure is not charged, first check whether the charging cable is broken, and you can use the data cable of the mobile phone to charge the charging treasure.
4, at present, the millet wireless charging bank capacity is 10000mAh, can be wireless charging anytime and anywhere.
5. There are three solutions. Choose a thin shell or a transparent shell: Choosing a thin shell or a transparent shell will reduce interference with electromagnetic waves, thereby improving the efficiency of wireless charging. Remove the phone case and charge again: Remove the phone case and charge again to ensure the normal work of wireless charging.
6, millet wireless charger green flashing is in the state of charging. The corresponding indicator relationship is as follows: 0-30% orange blinking 30-99% green blinking charging completed green steady on charging abnormal red flashing fast Finally summarize: if the charging bank is charging red flashing is abnormal; Power bank wirelessIt is abnormal that the lamp flickers during discharge. It is abnormal that the indicator is not on when the charger is discharged.
is due to the mobile phone case is too thick, the material is not suitable, etc., resulting in the power failure of the charging bank. There are three solutions. Choose a thin shell or a transparent shell: Choosing a thin shell or a transparent shell will reduce interference with electromagnetic waves, thereby improving the efficiency of wireless charging. Remove the phone case and charge again: Remove the phone case and charge again to ensure the normal work of wireless charging.
High temperature High temperature protection or there is a metal foreign body between the phone and the charging bank, or the charging bank or the phone is broken.
Is the wireless charging treasure harmful to the mobile phone battery? The following explanation is no harm, because the wireless charging treasure is an external battery, equivalent to the second battery of the mobile phone. There is no risk to the phone. It combines a magnetic wireless charger, magnetic wireless charging mobile power and other functions.
Because millet's wireless charging treasure may charge the number of frames and charging frequency and your Apple eight p mobile phone charging frequency is not in the same frequency band. So in a few seconds there will be an automatic blackout and you canRematch the phone and then charge it.
First of all, let's take a look at the specifications of Xiaomi wireless charging treasure, which is 149 mm long, 76 mm wide, and 14mm thick. There is a USB port for mobile phone charging and a charging port for a power bank for mobile phone charging. The second step, we need to fully charge the charging bank, only need to use the USB cable to charge, charging will show the specific computer, after full charge can be used normally.
Xiaomi wireless charging treasure is a wireless charging treasure developed by Xiaomi, which supports 10W universal fast charge. Tape LCD displayThe mobile power supply of the screen. With the development of mobile power, users are not only satisfied with being able to charge, more users pursue safety and personality. Some mobile power supplies on the market have worked hard on the housing and battery types to produce mobile power supplies with digital display. Such products generally use pure cobalt cells to reduce the error of the power display.
The reason why millet mobile phone wireless charging does not charge may be that the battery has entered a dormant state. That's mostly because users run out of power,Caused by the phone automatically shutting down. Wireless charging technology (English: Wirelesschargingtechnology; Wirelesschargetechnology is derived from radio energy transmission technology, which can be divided into two ways: low-power wireless charging and high-power wireless charging.
You want to ask is millet wireless charger flashing green do not charge what reason? The phone is not in the center of the wireless charger. The phone case is too thick, which causes the wireless charging to be blocked. The wireless charger is in poor contact, resulting in the failure to perform normal wireless charging operations.
The charger has a problem. If neither of the above is a problem Xiaomi charging treasure wireless charge does not enter the electricity , then there may be a problem with the charger itself, and it needs to be replaced or repaired. If you encounter the situation that the millet wireless charger light has been flashing, you can first try to adjust the distance between the charger and the phone, or check whether the interface is loose. If the problem still exists, it is recommended to contact Xiaomi customer service or go to a professional electronic repair shop for repair.
The reason why millet mobile phone wireless charging does not charge may be that the battery has entered a dormant state. This is mostly because the user runs out of battery and the phone automatically shuts down. Wireless charging technology (English: Wirelesschargingtechnology; Wirelesschargetechnology is derived from radio energy transmission technology, which can be divided into two ways: low-power wireless charging and high-power wireless charging.
You want to ask is millet wireless charger flashing green light does not charge what reason? Millet charging treasure wireless charge does not go into electricity ? The phone is not in the center of the wireless charger. The phone case is too thick, which causes the wireless charging to be blocked. The wireless charger is in poor contact, resulting in failure to perform normal wirelessCharging operation.
At this time should pay attention to whether there is a metal object placed on the wireless charger, please take it off and charge it again. The power will be off for a while, this is not placed in the right position, detected metal foreign objects, automatic protection Settings. Make sure you use the official charging head. Second, look carefully at the wireless charging instructions, encounter a metal foreign body near, it will automatically cut off wireless charging, and continue to flash the green light, and return to normal after power off.
This is mostly because the user will run out of power, the phone automatically shut down caused by. The solution to this situation is to remove the battery, wait 5 minutes, and then reinstall the batteryInstall it, and then connect the charger to charge, 30 minutes later, and then restart. Whether the phone uses a regular original Xiaomi charger. If you are using another charger, you need to check whether there is a problem with the charger, or the charger interface is damaged.
The charger itself has problems: the power cord of the charger is loose, the charging seat is damaged, the charging light is not up, etc., which will cause the charger to not work normally. Should check the charger itself has no problem, the problem is more serious, need to contact the after-sales service for repair or replacement.
1, the reason why millet mobile phone wireless charging does not charge may be that the battery has entered a hibernation state. This is mostly because the user runs out of battery and the phone automatically shuts down. Wireless charging technology (English: Wirelesschargingtechnology; Wirelesschargetechnology is derived from radio energy transmission technology, which can be divided into two ways: low-power wireless charging and high-power wireless charging.
2, between the charger and the phoneThe distance is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose. The interface of the wireless charger must be correctly inserted into the power socket, and if the interface is loose, the light will always flash. There is a problem with the charger.
3, you want to ask is millet wireless charger flashing green light does not charge what reason? The phone is not in the center of the wireless charger. The phone case is too thick, which causes the wireless charging to be blocked. The wireless charger is in poor contact, resulting in the failure to perform normal wireless charging operations.
4. First, checkEnsure that the connection between the charger and the device is secure and that the device is properly placed on the charger. Second, check whether the device itself has a charging problem, you can try to use a wired charger to charge to eliminate the problem of a wireless charger. Finally, if the above methods are ineffective, you may need to consider replacing the charger or contacting Xiaomi customer service for further support and solutions.
5, the charger itself has problems: the power cord of the charger is loose, the charging seat is damaged, the charging light is not up, etc., which will cause the charger to not work normally. Should check the charger itself has no problem, the problem is more strictIf it is heavy, it is necessary to contact the after-sales service for repair or replacement.