There are many charging methods for Bluetooth audio, the most commonly usedThe method is to use a USB power adapter or use a charger to charge. Use USB power adapter to charge: Connect the USB power adapter to the power socket Connect the USB cable to the charging port of the Bluetooth speaker, insert the other end of the USB plug into the USB power adapter to start charging, wait for the Bluetooth speaker indicator to turn green, indicating that the charging has been completed.
Method of charging the wireless Bluetooth speaker: plug the charger into the charging socket of the Bluetooth speaker, and then connect the charger to the AC power supply or personal computer. When charging, the charging indicator is on, and the charging is completeAfter, the indicator light is not bright, and the wireless Bluetooth speaker is successfully flushed.
Method 1: Most headphone manufacturers will adopt a unified treatment during production: hold down the "power switch" and "volume" buttons for 15 seconds at the same time. Method 2: Start the machine first (do not need to enter the code state), and then charge for 5-10 seconds, most of the charging in the boot state, will automatically shut down, the machine is forced to restore to the factory state.
The charging method is as follows: Place the charging base: Place the speaker on the charging base. The charging dock will provide a charging area, just place the speaker exactly whereOn the area. Connect the charging cable: Plug one end of the charging cable into the charging port of the speaker. The charging interface is located at the bottom or side of the speaker and can be found according to the design of the speaker. Connect to the charging base: Insert the other end of the charging cable into the corresponding port of the charging base.
If you use vivo mobile phone, the mobile phone charger can be used to charge the Bluetooth speaker, if the Bluetooth speaker has its own charger, it is recommended to use the original charger charging experience will be better.
LED wireless charger Bluetooth speaker to charge the mobile phone method is as follows: ensure that the speaker is connected to the power adapter, the speaker itself is fullElectricity. Find the wireless charging area on the speaker, on the top or side. Place the phone that supports wireless charging on the wireless charging area, ensuring that the back of the phone is in contact with the charging area.
The use of wireless audio is as follows: Prepare a wireless Bluetooth audio that can be used normally to ensure sufficient power supply, and then press the power button at the top to turn on the audio, as shown in the figure. As shown in the picture, open the main page of mobile phone Settings, as shown in the picture, find the "Bluetooth" option, click to enter. As shown in the picture, after entering the interface, select the "Bluetooth" option, then the Bluetooth function of the mobile phone is normally enabled.
Wireless Bluetooth speaker How to use one: Bluetooth connection function if the mobile phone is connected to Bluetooth speakerYou need to search for the name of the Bluetooth speaker (each Bluetooth speaker name is different), and then click on the pair, you can play music.
Turn on the speaker, at this time the power indicator is white, and the Bluetooth indicator begins to blink in white. We then press and hold the power-pairing button until we hear the device's voice guidance and the Bluetooth indicator starts flashing rapidly with a white light. Then we turned on the phone's Bluetooth function and directly searched for nearby wireless devices that could be connected (when the "SRS-XB20" device appeared on the phone, we clicked to connect.
Usage:First charge the Xiaomi wireless Bluetooth speaker to ensure sufficient power. Turn on the power switch of the speaker, press and hold the Bluetooth key until the indicator light of the speaker flashes red and blue alternately, indicating that the speaker is in the state to be connected. At this time, turn on the Bluetooth function of the phone, click Search device, find the name of the Bluetooth speaker, click Connect, enter the pairing code to connect successfully. Once connected, the phone plays music and sounds are emitted via Bluetooth speakers.
How does a mobile phone connect to a wireless Bluetooth speaker? 1, turn on the Bluetooth function of the mobile phone and search the status of the Bluetooth headset. 2, to make the wireless Bluetooth speaker in the startup state, you need to long press the wirelessAnswer key of Bluetooth speaker. 3, until the indicator light: blue light and red light alternately flash then release. 4, this time the Bluetooth speaker and mobile phone will enter the match. 5, after the Bluetooth speaker model device is displayed on the mobile phone, click OK to connect and use.
Well, in general, the line does not break the modified car machine is still very satisfied, customized wireless charging 400 ocean (Hugely expensive, but only one of the whole network is customized), Carplay module 2100 ocean, to achieve integrated wireless charging and wireless Carplay function, old cars can be replaced by new machines for two or three years. | Edit: 5 10 | This article is from the author of Auto home car home number and does not represent the views and positions of auto home.
Adding the carplay module will increase the problem of the car. In some older models of the year, there is no car screen only radio, etc., mainly because if it involves installing module hardware such as a large screen, it will remove components such as the center console or decorative plate, and the later capacityEasy to cause abnormal sound, and if the broken wire installation is not professional, or the use of inferior plug installation, it will increase the safety risks of short circuit.
The author said that after installing CarPlay, it can be safer to use mobile phones to navigate and listen to music, avoiding the insecurity of using mobile phones while driving. The author is satisfied with the experience of CarPlay, especially the new main interface and some details polishing, so that the experience of using CarPlay has been improved a lot. The author mentioned that the new Mercedes and BMW have begun to charge CarPlay on an annual basis, reminding friends to pay attention to the switch host.
CarPlay supports front and back loading, and with the update of iOS, CarPlay will be updated, and the entire in-car experience will be automatically upgraded! This is the biggest advantage of CarPlay's in-car system, we no longer have to regularly update difficult navigation databases, and we don't have to endure outdated in-car technology or design, because no matter how old your car is, your in-car software will always be up to date. After wireless carplay is connected to the car, the mobile phone generates a lot of heat and consumes electricity too fast, even if some models are equipped with wireless charging, but sometimes it is stillIt's charging faster than it's draining. And cable carplay, every time you get on the car to plug-in, very troublesome, not beautiful. Even more bizarre is that some models have no place to put mobile phones near the connector.
1. Insert the receiver wire into the output hole on the receiver, the same as the microphone is plugged in. Put the other end into the amplifier microphone audio port, the audio port will generally have a note here need to pay attention to check. Plug the power cord into the wireless receiver. On the otherPlug one end in. Install the microphone battery, pay attention to the positive and negative terminals, the small end to the large end. Finally, power on the receiver, and then power on the wireless canister.
2, the use of Bluetooth connection, the wireless microphone receiver, inserted in the computer's sound card or independent sound card, the speaker connected to the computer or independent sound card speaker output. The receiver of the wireless microphone is connected to the speaker or microphone jack of the power amplifier. The wireless microphone is matched with the receiver, the receiver is installed in the audio, no connection line, the audio is opened, the microphone switch is opened on the line.
3. First connectConnect the wireless receiver and stereo; Then turn on the microphone and check the frequency band that the microphone is currently in; Use the button on the receiver to adjust the frequency band, and the two frequency bands can be linked to the microphone.
4, the wireless microphone is connected to the sound by the wireless microphone receiver and the audio input interface of the sound. The wireless microphone wirelessly transmits the audio signal to the receiver, which then outputs the signal to the stereo for amplification. Here's how to connect: First, make sure the wireless microphone and receiver are fully charged and have enough power. Will receive wireless microphone