Rod Bee loudspeaker is generally used 5V/600-800mAh charger, battery capacity is 8000 MA, the average charge takes two hours, one time can be used for one to two days, charging time is short, long use time is loved by people. The Rod Bee receiver is fully charged and disconnected from the charger.
RODE Rode microphone WirelessgoII II generation. ROThe DE Rode Microphone WirelessgoII II is a wireless bee receiver that can be used while charging, and the radio effect is very good. The small bee receiver has two types of wireless and wired, the receiver is portable, mobile, small size, loud sound, easy to use.
Functionally, Rhodes Bee is a digital wireless microphone, through the SERIES III 4GHz digital wireless transmission, 128-BIT encryption design, the use of linear distance up to 70 meters; Built-in heart-shaped full directional capacitor microphone, equipped with intelligent noise reduction chip, can bring high qualityThe effect of the radio; And support 3-segment output PAD, automatically adjust the gain of switching microphone output, improve audio quality.
Lord's Bee on live one. According to the query of relevant public information: Rod wireless bees often encounter a lack of mobile phone power when live broadcasting, because the charging port is occupied and cannot be charged, and now with live broadcast No. 1, this problem is solved. It can not only charge, but also realize real-time monitoring.
The difference between outdoor portable speakers and small bees in the use of microphones is: outdoor portable speakers with wireless microphones, the sound is relatively large, easy to hear clearly. Little bee speaker wearing waistHow long does it take for Bee wireless earphones to charge '> How long does it take for bee wireless earphones to charge
1. Left side. According to the query Bilibili, the top of the small bee is the earphone monitoring jack and the audio output jack. The left side of the bee is the Type-C charging port. The right side of the bee is the reset hole, the power button/mono stereo switch button, and the volume adjustment key of group AB. On the front of the bee is the TFT screen, LOGO and model number. The little bee's back is still a back clip.
2, if your speaker has Bluetooth function, then you can try to find the Bluetooth switch, choose to turn off. Honeybee speaker Bluetooth mode switch method specific just turn on the Bluetooth to search the name of the speaker can be turned over a certain Angle in the card play mode and then it will switch.
3, the method of connecting the mobile phone to the bee is very simple: the bee loudspeaker is turned on, the ear will have a voice prompt, and the device can be automatically searched for. At this time, turn on the Bluetooth of the mobile phone, detect the nearby Bluetooth signal, search for the model of the small bee speaker, click to connect, and enter the PIN code (the default is 0000). When the phone interface prompts that the connection is successful, the phone and the small bee loudspeaker are connected. Open the handThe machine can play music.
4, the specific steps to use Coring Bee wireless earphone are as follows: After turning on the Coring Bee, the earphone will have a voice prompt and automatically search for the device that can be paired. At this time, turn on the Bluetooth device of the phone. Detect nearby Bluetooth. Search for nearby Bluetooth, after finding the Bluetooth headset (usually the model of the Bluetooth headset will be displayed), click to connect. After confirmation, the connection is successful. Headphones are ready to use.
5, SONY Ericsson s 518 small bee loudspeaker how to use instructions: After the earphone is turned on, the earphone will have a voice prompt, and the automatic search can be used to pair the device, thenTurn on your Bluetooth headset. The mobile phone can be tested, that is, you can test the nearby Bluetooth signal, and then search for the nearby Bluetooth signal, and then search for the nearby Bluetooth signal, search for the Bluetooth headset signal (generally will show the Bluetooth headset model), and then link.
6, it is called wireless headset, but it needs a transmitter, the headset has a receiver, 10MI receiving function. I use the RAPOO wireless headset H8010, home cleaning and washing clothes, you can walk anywhere.
Hello, first of all thank you for your support to China Telecom. According to your description: The little Bee BEE2 has not been released yet, and we recommend the telecom version of other brands to you. ZTE N986 Telecom 3G blue/White CDMA2000/GSM 5 inch HD screen/quad-core/dual-mode dual to dual-pass business life in one hand. You can buy this phone at Anhui Telecom online business hall and enjoy more discounts.
Hello, first of all thank you for China TelecomSupported. At present, there is no telecom version of this mobile phone, you can pay attention to the official website of Telecom.
Quality after-sales protection of the machine details as follows you can log in Anhui Telecom network department consultation, view, purchase this model to enjoy more concessions at present Anhui Telecom network Department to carry out relevant mobile phone promotions. If you need to buy a machine, please log in Anhui Telecom network Hall mall to buy the latest mobile phone. If you need to check the bill, pay the phone bill, please login Anhui Telecom online business hall, over 100 send 2 yuan. I hope my answer will be accepted by you. thank you.
This article will introduce a small puzzle called "smart bee"Game, English name Smart Bee. In the game, the bee protagonist is faced with the difficult task of gathering honey. This is not an easy task, as the bees need to skillfully avoid numerous obstacles in order to successfully complete the goal. In the operation, the player only needs to click the mouse to control the movement of the small bee.
1, RODE Rode microphone WirelessgoII II. RODE microphone WirelessgoII II is a wireless bee receiver that can be used while charging, and the radio effect is very good. The small bee receiver has two types of wireless and wired, the receiver is portable, mobile, small size, loud sound, easy to use. 2, in theory, it is possible, but if it is done in this way, first, it will reduce the service life of the built-in lithium battery, second, it is easy to burn out the circuit system, and third, the most dangerous, the battery may be overheated, resulting in an explosion.
3, Abstract: The small bee loudspeaker is generally built-in rechargeable battery, can be charged to use,When charging, connect the charger to the charging port of the bee, and then plug it into the socket. The indicator light will indicate that the charging and charging state is full; If there is no charger, you can also use a usb charging cable to connect the usb interface of the computer to charge, but the efficiency will be slower, and the general ordinary charger can be filled in 4-6 hours.
4, can be rechargeable, the correct use of the battery is: the first use of the battery to run out of battery power, fully develop the capacity limit of the battery. Later charges can be charged before they run out. This can effectively extend the battery life.
5, you shouldIt supports the charger power supply. You can use charging appliances should be able to play a role in charging. Ordinary dry batteries can not be used for a long time, if the use of dry batteries for a long time will be dangerous. Therefore, connecting the mains for a long time requires rechargeable batteries to be safe.
Since Marconi invented radio Bee wireless charging ic, wireless communication technologyThe technology has always been in the direction of increasing data rate and transmission distance. For example, Bee wireless charging ic : Wan-wide third generation mobile communication networks (3G) are designed to provide multimedia wireless services Bee Wireless charging ic LAN-wide standards range from IEEE8011's 1Mbit/s to IEEE8011g's 54Mbit/s data rates.
ZigBee wireless communication technology is based on the way bees communicate with each other and developedNetwork technology used in Internet communication. Compared with the traditional network communication technology, ZigBee wireless communication technology shows more efficient and convenient characteristics. As a short-range, low-cost, low-power wireless network technology, ZigBee wireless communication technology its networking, security and application software technology is based on the IEEE approved 80214 wireless standard.
Zigbee is a low-power personal area network protocol based on the IEEE8014 standard, and then zigbee technology makes the technology specified according to this protocol is a short-range, low-power wireless communication technology.
First, the real life data information transmission is based on ZigBee wireless sensing technology for the communication network, can establish a lot of network connection points, while relying on the network assistant can also transmit data communication in real time. Therefore, data transmission with large information capacity is the main feature of ZigBee technology, which avoids signal collision when transmitting data, resulting in unstable transmission.
roles, each node has a specific responsibility. In the field of China's Internet of Things, the China Internet of Things school-enterprise alliance recognizesAs a short-range wireless communication technology, ZigBee's greatest value lies in its ability to provide users with wireless data transmission services conveniently and quickly, which makes it show strong practicability in the Internet of Things application scenario, whether it is smart home, industrial monitoring, or smart city and other fields, it has a wide range of application prospects.
Does the subject want to ask "the bee charging light is not bright bee wireless charging ic reasons"? touchBad. Check whether the bee has been showing a red light when charging, if it is, it means that the amplifier is not relevant, to turn off later charging; If the light is off, it is that the charger is bad bee wireless charging ic, and the charger needs to be replaced or repaired.
may be out of power Bee wireless charging ic is generally charged for 8-10 hours can not exceed 10 hours. How often to charge to see bee wireless charging ic his workload. One punch a dayThe amount is not big, two or three days. About four hours after full blast. And don't use up all the power in the battery. So easy to lose the battery, when to recharge it? A sudden drop in tone at the same volume is a sign of low power. Charge it in time.
The causes are as follows: If the connection indicator is off, it indicates that a router is faulty between the network adapter and the HUB or switch. If the signal light is off, there should be no signal for transmission. The connection between the lines is normal. Use the replacement method to replace the network cable connected to the computer with another computerTest or use a tester to check.
Make sure the battery is fully charged before you start using the KU-898 amplifier. If the power light shows red, it means sufficient power; Green means full, or not bright means low. In this case, please charge before continuing to use. When the power is turned on, turn the volume knob clockwise. When the power indicator turns green, it means that the amplifier is turned on.
When the portable speaker power indicator is green, if you continue to use the machine, the portable speaker will automatically power off to protect the battery in the machine. The microphone core should be directed towards the mouth and 2-3 awayIn centimeters. Please charge after using the portable talk, so that the next use of the small bee loudspeaker is only these steps, easy to learn, even if you do not know any technology, you can quickly learn to use.