Method 1: Use iPhone The first way to check the battery level is to use the iPhone to check the battery level. First of all, wireless charge bright red , connect the charging bank to the iPhone via Bluetooth. Then wireless bright red , open the iPhone wireless bright red control center Wireless bright red , you can see the power of the charging bank displayed on the screen. If it is not displayed, you can try to reconnect. Method 2: Using Siri The second way to check your power bank is to use Siri to check your power bank.
The amount of power in Apple's wireless power bank can be viewed on the screen of the iPhone after being connected to the power supply. To charge your iPhone with a wireless power bank, you first need to connect the bank to a power source. After the connection is successful, the iPhone will automatically recognize the wireless charging bank and start charging. At this point, you can check the battery level on the iPhone's screen.
If the light of the charging box is green slightly, it means that the charging is inTo measure the percentage, open the Settings to select the device, see the Bluetooth connection, and find the mouse to see the percentage of power. This mouse is dual-mode, wired and wireless mode can be used, and equipped with a magnetic wireless charging base, put the ROG Sparta X sports mouse on the base, you can wireless charging oh.
3, the first method is to use a charging cable to charge. First of all, you need to find the charging hole of the wireless mouse, and generally the charging hole will be at the front of the wireless mouse. After you find it, you need to turn the wireless mouse on, plug the mouse charging cable into the jack, and then start charging directly. As a mouseAfter the start of charging, the mouse light will light, indicating that the start of charging. Be careful not to turn off the Infinity mouse switch during this process.
4, when it is necessary to charge the GPW2, the user only needs to plug one end of the included USB cable into the charging port of the mouse and the other end into the USB port or USB power adapter of the computer. Once connected, the mouse starts charging, and it usually only takes a few hours to recharge. The mouse's LED indicator will show the charging status, usually flashing while charging, and then steady on after full charge.
5, the first way is to use a charging cable to charge first you need to findTo the charging hole of the wireless mouse, generally speaking, the charging hole will be at the very front of the wireless mouse. You can carefully look for it. After you find it, you need to turn on the wireless mouse, insert the mouse charging cable into the jack, and then directly start charging when the mouse starts charging.
1, this situation is due to the overdischarge of the headset resulting in circuit protection wireless bright red , according to the followingStep to operate Wireless charging Bright red : Take out 2 Buds headphones from the charging case. Connect the charger wireless charging bright red , put the 2 Buds headphones into the charging case, and check the state of the indicator (middle position). The red light immediately turns green - repeat 1,2 steps (this problem is caused by overdischarge, it takes about 10 times to repeat 1,2 steps).
2, may be Bluetooth headset for a long time did not use wireless bright red The reason is that the headset itself has a "since wireless bright red I protect" function, in a "closed" state, if this happens, you can charge for a few minutes or dozens of minutes to see if the indicator light is bright. If it is not lit to see if the charger is plugged in, if it is plugged in, there may be a problem with the indicator light of the Bluetooth headset or the charger cannot be charged, otherwise the headset is damaged.
3, the charger is damaged (borrow another Bluetooth headset charger can try). The small battery in the Bluetooth is dormant or broken, try charging it for half an hour firstIf the battery can be activated, contact the after-sales service.
4, in general, this is not normal, normal after full charge, the LED should have a color change as a hint. Please refer to the instructions. But this is not necessarily a serious problem, may be the machine in the factory, the battery calibration information is not accurate, if charged for a period of time, the earphone power has a star increase, can be used normally, there is no problem.
1, neck hangingBluetooth headset power display: Enco M3Enco M3Enco Q1 Wireless headset light Red slow blinking indicates low power, red steady on indicates charging, green steady on indicates charging complete.
2, Bluetooth headset operation instructions: First enable the Bluetooth function of the mobile phone and select "Allow to be discovered by other devices", path: go to the mobile phone "Set Bluetooth advanced Settings allow to be discovered by other devices", click open. Then turn on the Bluetooth headset, perform device pairing mode, search for the Bluetooth device on the mobile phone, and click pairing processing.
3, may also beThere was something wrong with the other accessories of the Bluetooth headset, so the red light was on. It is recommended to test the Bluetooth headset after sale to solve the problem.
4, when using for the first time, keep the headset in the charging case, open the charging case, the headset will automatically enter the pairing state (the white indicator light of the charging case flashes quickly); Turn on Bluetooth: General pairing: Bluetooth search for "OPPO Enco Free, select and complete the pairing. Quick pairing: Near the OPPO phone that supports quick pairing, when the Bluetooth is turned on, the phone will automatically pop up a quick pairing prompt, please follow the on-screen prompt to complete the pairing.