1, if you use the ambient temperature of the mobile phone is too low, there may be a touch screen failure problem, which is affected by the physical characteristics of the screen device itself, it is recommended that you try to keep the phone inUse at ambient temperature of 0 ° C to 35 ° C. If your phone screen is dirty or has water stains, it may affect the touch sensitivity of the screen. It is recommended that you try after wiping the screen clean; If the screen has a film, it may be because the protective film is too thick, affecting the touch sensitivity of the screen.
2. There may be multiple reasons for the insensitivity of the touch screen of Huawei mobile phones, and you need to troubleshoot one by one. The following solutions are possible: Check whether a third-party one-click lock screen application jumps randomly, for example, to the lock screen or camera screen. You are advised to uninstall third-party software such as one-click Screen Lock.
3. If you use a Huawei mobile phone and the touch screen is insensitive, perform the following operations to rectify the fault: If you use the ambient temperature of the mobile phone is too low, the touch screen may be insensitive, which is affected by the physical characteristics of the screen device itself, it is recommended that you try to keep the mobile phone at 0℃-35℃ ambient temperature. If your phone screen is dirty or has water stains, it may affect the touch sensitivity of the screen.
4, touch screen is not sensitive if you use the ambient temperature of the phone is too low, there may be a touch screen is not sensitive problem, this is the screen deviceThe physical characteristics of the piece itself are affected, it is recommended that you try to keep the phone at 0℃-35℃ ambient temperature.
5. If you use a Huawei mobile phone and the touch screen fails, perform the following operations: If the screen of your phone is dirty or stained with water, the touch sensitivity of the screen may be affected. It is recommended that you try after wiping the screen clean. If the screen has a film, it may be because the protective film is too thick, affecting the touch sensitivity of the screen.
6, if you use non-standard charger and data cable charging, non-standard charger shielding interference ability is weak, canIt will affect the touch screen function of the mobile phone. Please use the standard charger and data cable to charge the mobile phone. Three: If you feel insensitive when using third-party applications, it may be caused by problems with the application itself.
If the screen of your phone is dirty or stained with water Huawei Wireless Charger touch sensitivity , the touch sensitivity of the screen may be affected. It is recommended that you wipe the screen clean and try Huawei wireless charger touch sensitive ; If the screen has a film Huawei wireless charger touch is not sensitive , it may be because the protective film is too thick, affecting the screen touch sensitivity. You are advised to replace a thin (strong) Huawei wireless charger with a thin (/strong) third-party protective film, or visit Huawei customer service center to replace an official protective film.
If you use the ambient temperature of the phone is too low, the touch screen may be insensitive, which is affected by the physical characteristics of the screen device itself, it is recommended that you try to keep the phone at 0rong>, touch sensitive key. Huawei wireless car charger clamp arm failure because two rigid reed is stretched big Huawei wireless charger touch is not sensitive , only need to touch the two sides of the "oval gravure bit" Huawei wireless charger touch is not sensitive sensing buttons, touch and stay for 2 to 3 seconds to try, the clamp arm will automatically open.
The two rigid reeds are stretched wide. Huawei wireless car charger clamp arm failure only need to touch both sides of the "oval gravure bit" Huawei wireless charger touch insensitive sensing button, touch and stay for 2-3 seconds to try, the arm will automatically open.
Huawei mobile phone car charger automatic sensor wireless charger can be intelligent opening and closing. Bumpy Huawei wireless charging touch is not sensitive road conditions, built-in infrared sensor, the phone is close, the clamping arm automatically opens and closes and locks, the strong clamping force mobile phone is not easy to fall off, can easily deal with various bumps, touch the left sensor key is easy to unlock, the flout state mobile phone can be manually removed, so that the operation is convenient, rewind and put freely.
Center console. Fix the car wireless charger toIn the proper position of the cab, Huawei wireless car charger is installed on the center console, depending on the actual situation. The super fast wireless car charger adopts the round shape of the track, and the two sides of the fuselage and the bottom are equipped with fixed clamp arms.
The release of Huawei P40 has greatly increased the market demand for 27W wireless fast charger. Previously, Huawei released a 27W wireless charger for daily and in-car environment use. Among them, the car charger is full of science and technology, not only has a built-in fan cooling system, but also adds an infrared sensor, as long as the phone is close, the body clip arm will automatically stretch and shrink, and it is very square to useFuck.
The use of non-standard data cable, or the insertion of data cable speed is too slow may also occur protocol interaction abnormalities, resulting in fast charging abnormalities, it is recommended to reinsert the data cable. Check whether Huawei standard charger and data cable are used. To ensure charging safety, you can enter the fast charge mode or super fast charge mode only after using Huawei standard charger and data cable. Please confirm whether there is poor contact or damaged charging equipment.
Lithium-ion batteries have a life span. Lithium-ion batteries are limited in the number of times they can be charged, but at the same time, lithium-ion batteries, like everything else, have a life span. Do not leave the device completely without power. If the lithium-ion battery charge is too low, this can permanently damage the lithium-ion battery. So you can plug in the power supply and charge it as soon as possible.It may be that the charger is in poor contact, you re-plug the charger to try; If conditions permit, compare and observe the flash charger to eliminate the charger fault; Use the original charger to charge, check when charging offWhether it has returned to normal; After backing up important information (contacts, multimedia files, etc.), enter the "Settings" channel -- "Other Settings" -- click "Restore phone".
Hello! It is recommended not to use a wireless 27 watt charger. Purchase the original P40pto wireless charger from Huawei's official authorized store or customer service center. It's good for the battery and good for the phone. Some suggestions. thank you.
Huawei's p40 phone can be charged with a 27-watt wireless fast charge. The actual effect of charging is quite good. A higher specification wired charge is also availableElectricity is charged.
Yes. The 65-watt charger supports the 27-watt wireless fast charge protocol. Huawei Technologies Co., LTD., founded by Ren Zhengfei in 1987 and headquartered in Longgang District, Shenzhen City, Guangdong Province, China, is a private communications technology company that produces and sells communications equipment.
1, Huawei Mate 8 mobile phone does not support wireless charging function, it is recommended to use the original wired charger to charge.
2. On the desktop of your Huawei mobile phone, tap the Settings icon. 2/4 Enter the Settings screen and tap Battery to enter. 3/4 On the battery screen, turn on the wireless reverse charging switch.
3, Mate 8 does not support wireless charging, battery capacity 4000 mAh (typical value), support fast charging, standard 9V/2A Chinese charger, data/charging interface support standard Micro USB, theoretical charging time 150 minutes. Use the 9V/2A fast charger to charge, the status bar battery displays a double big lightning (one big one small) icon, in addition to the lock screenFast charging animation and prompt "Fast charging".
4, no. None of Huawei's phones have built-in wireless charging receivers.
5. - If random jumping or ghost hands occur only when a third-party charging device is used or a specific place is charged, it may be caused by unstable power supply voltage. Replace the Huawei charger or replace the power supply. - If the touch screen jumps automatically when the device is using wireless charging, check whether the device supports wireless charging. - Check whether the NFC function is enabled. The NFC automatically opens a specified application in a specific scenario.
6, in order to snipe the iPhone 6S, Huawei hastily released the Huawei Mate S series, and the top version of the use of 3D touch function before Apple. However, the Kirin 935 processor used by Mate S is not much better than the Kirin 925 in performance, and the battery capacity is only 2700mAh, completely losing the ultra-long battery life of the Mate series, and due to high pricing, Mate S sales are very depressed.