1, ①, about the above MDY-08-EV model of the charger DC output is: 5V/2A. ②, about the above MDY-11-EM charger DC inputOutput: 5V / 3A, 9V / 23A, 12V / 67A, 10V / 25A. 3, to the above two charger models are different, the voltage, current and power of the two chargers are different.
2, to the MDY-08-EV and MDY-11-EM, are representative of the charger model, for example, MDY-08-EV original charger DC output: 5V/2A. The MDY-11-EM charger DC output is: 5V/3A, 9V/23A, 12V/67A, 10V/25A. So, these two don'tThe same type of charger, the parameters are also different.
3, MDY-08-EV and MDY-11-EM are two different charger models. For example, the original charger of the MDY-08-EV has a DC output of 5V/2A, while the DC output of the MDY-11-EM charger includes several parameters such as 5V/3A, 9V/23A, 12V/67A and 10V/25A. Therefore, the two models of chargers are different in terms of parameters. The above information is for reference only.
2, use the following method Wireless charging and demodulation circuit : After plugging in the power supply, touch the arc light pole with your finger at any position to light up. Put the device that needs to be charged under the lamp, switch the mobile phone to the wireless charging mode, and put it into the wireless charging induction area of the lamp. Use the phone charging cable to connect the lamp USB port to the phone, and the phone can also be charged.
3, very simple, regular discharge. For example, every month (if there has been no power failure), do not plug in the AC plug, turn on the light, until the light is not bright, indicating that the electricity has been discharged. Plug in the AC power.
4, wireless charging,The desk has never been so clean. The touch design is adopted, and the three touch buttons below are the light switch key, the on key and the timed shutdown key in turn. At the same time, this is also the wireless charging area, if your mobile phone supports wireless charging, it can be directly put up to charge the mobile phone, say goodbye to the bondage of the data line, the desktop is suddenly clean. Oh, and you can charge it wirelessly without turning on the lamp.
Mi matter wireless charging mouse pad disassemble Use a crowbar to separate the mouseMat. Divided into aluminum base and mouse pad two parts. The mouse pad corresponds to the wireless charging part wireless charging and demodulation circuit above hollow wireless charging and demodulation circuit , reduce the thickness wireless charging and demodulation circuit , and maintain consistency. The wireless charging circuit board and coil are attached to the aluminum base plate. Compare the size of a $1 coin. The back of the magnetic separator is insulated with high-temperature tape, the PCB capacitor position is hollowed out to reduce the thickness, and the back has no components. Wireless charging part, the circuit board is more concise.
Xiaomi Wireless charging treasure youth version 10000mAh Disassembly Xiaomi wireless charging treasure uses an integrated plastic shell, which can only be violently disassembled. Open the shell of the wireless charging surface wireless charging and demodulation circuit , inside is the wireless charging coil and thermistor, and there is a shielding cover on the circuit board above. Remove the wireless charging coil to expose the battery. The battery adopts Lishen 7V battery, 10Ah, 10000mAh capacity, the highest charging voltage 2V. There is a thermistor on the side of the battery to detect the battery temperature in real time.
and currently on sale wireless charger