You can try the following methods to troubleshoot:
1. Clean the connection port: Check whether the connection port between the magnetic charger and the device is clean. Sometimes, dust, dirt, or foreign objects may hinder the magnetic connection. Gently wipe the connector with a clean, soft cloth to ensure that there are no impurities.
2. Adjust the position: the position between the magnetic charger and the device may be wrong. Try to adjust the position of the device slightly while connecting to see if you can successfully adsorb and charge.
3. Check the magnetism of the charger and the device: determine whether the magnetism of the magnetic charger is normal. You can try to attach the charger to other magnetic surfaces, such as refrigerator doors or other magnetic objects. If it can be adsorbed, it indicates that the magnetic properties of the charger are normal. Then check the magnetic receiving area of the device to ensure that its magnetism is normal.
4. Replace the charger: If you try the above methods and still can not adsorb, there may be a problem with the charger itself. Consider replacing your magnetic charger with a new one or contact the manufacturer for technical support.
If your problem is still unresolved, it is recommended that you contact the charger's manufacturer or customer support department for professional help and guidance.
If the magnetic charger does not adsorb, please try the following solution:
1. Check whether there is dust or dirt between the charger and the device and clean them to ensure good contact.
2. Check whether the magnetic force between the charger and the device is strong enough. If it is not strong enough, you may need to replace the charger or device.
3. Check that the alignment between the charger and the device is correct and ensure that they are perfectly aligned.
4. Try to use a different charging cable or charger, sometimes the quality of the charging cable or charger will affect the magnetic effect. If the problem persists, it is recommended to contact the charger manufacturer or device manufacturer for further assistance.
< br >
1. It may be that the contact between the magnetic charging head and the charging cable is poor or the interface has been damaged, and a new magnetic charger needs to be updated.
< br >
2. It may be that there is a foreign body blocking the charging port of the device, resulting in failure to charge. Try to clean the charging port.
< br >
3, it may be the device charging port or charging power chip fault, need to carry the device to the after-sales inspection and replace the corresponding components.
The problem of weak suction of the magnetic charging bank can be solved in the following ways: Paper or other thin items can be filled between the rear cover of the charging bank and the mobile phone to increase the adsorption area and adsorption force.
The adsorption force of the magnetic charging bank is affected by factors such as the size and quality of its magnet and adsorption area.
By filling items, the adsorption area can be increased, so that the charging bank is more closely adsorbed on the phone.
In addition, you can also replace the magnetic charging treasure with stronger magnetic force or replace the magnetic charging treasure suitable for the mobile phone model to improve the adsorption force.
At the same time, avoid placing the charging bank in the groove or bend of the back cover of the phone, so as not to affect the adsorption force.
Charging contact has oxide attachment, resulting in poor contact;
< br >
2. The bracelet runs out of power and enters hibernation state;
< br >
3. Bracelet hardware problems, etc.
< br >
It can be solved in the following ways:
< br >
1. Scrape the charging contact of the bracelet and charger with a hard object, such as coins, keys, scissors, etc.;
< br >
2. Plug and unplug several times to ensure that there is no gap between the bracelet and the charging contact;
< br >
3. Plug in the charger for about half an hour to activate the battery of the bracelet.
< br >
remark
< br >
If you still cannot charge after multiple attempts and replacing the charging cable, contact the after-sales service for replacement.