Please take off the mobile phone protective cover before charging because some mobile phone protective cover is too thick, or mobile phone protective cover wireless fast charge repair material reasons, may affect the mobile phone wireless charger identification function, it is recommended that you take off the mobile phone protective cover and try again. 4, please check whether there is a wireless fast charge between the mobile phone and the wireless chargerRepair other items Please remove them if necessary. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally. Connect your phone directly to the wired charger to see if it can be charged.
If your phone does not work with wireless charging, please follow these steps to troubleshoot Wireless fast charge repair : Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger.
Please use the original protective case, do not use too thick or magnetic insulation material/metal material protective case, these protective cases may affect the charging efficiency or can not be charged, or even overheating to cause the phone can not be charged or damaged. If the above methods do not solve the problem, please back up the phone data in advance and carry it with youMachine, wireless charger, wired charger set and purchase voucher to vivo customer service center for testing.
The mobile phone must support wireless charging, do not support wireless charging must not be charged. The method is as follows: you can buy a mobile phone case that supports wireless charging, and install it on the mobile phone. The advantage of this method is simple and convenient, and there is no need to replace the mobile phone or disassemble the internal part of the mobile phone. The disadvantage is that it may increase the weight and thickness of the mobile phone, and affect the heat dissipation and signal of the mobile phone.
1, at this time should pay attention to whether there is a metal object placed on the wireless charger, please take it off and charge again. The power will be off for a while, this is not placed in the right position, detected metal foreign objects, automatic protection Settings. Make sure you use the official charging head. Second, look carefully at the wireless charging instructions, encounter a metal foreign body near, it will automatically cut off wireless charging, and continue to flash the green light, and return to normal after power off.
2, if you encounter the millet wireless charger light has been flashing, you can taste firstTry to adjust the distance between the charger and the phone, or check whether the interface is loose. If the problem still exists, it is recommended to contact Xiaomi customer service or go to a professional electronic repair shop for repair.
3, finally, if the above methods are ineffective, you may need to consider replacing the charger or contacting Xiaomi customer service for further support and solutions. To better understand the problem, we can consider a practical example. Suppose a user places his Xiaomi phone on a Xiaomi wireless charger to charge it, but finds that the green light starts flashing.
1, it is recommended to try after re-plugging the charger and data cable, if the data cable is not inserted in place or the insertion speed is too slow, it may be identified as an ordinary charging mode. It is recommended to use the standard charger and data cable included with the Honor device. The charger and data cable will be tested when charging, and the following conditions can be met to enter the super fast charge mode: ① : Both the device and the charger support the super fast charge, and the charging mode is the same.
2, performance, honor wireless charger support 27W wireless fast charging, measured honor V3The 0 Pro charges fast, with 85% full charge in 1 hour, only slightly less than the wired fast charge. During the charging process, the built-in active cooling system effectively controls the temperature, even if it is used for a long time, there is no need to worry about overheating. The charger has a wide range of compatibility and can be used with a variety of cables and chargers, but a pure PD protocol charger may affect the wireless fast charge power.
3, first open the mobile desktop, enter the 【 Service 】 menu. Click My at the bottom right and select My Device. Click and select [View device parameters] to continue the next step. Select the "Fast Charge" option to view whenWhether the mobile phone supports wireless charging. After confirming, put the phone in the [wireless charger] and display the [charging tips].
4, wireless chargers are basically universal, but different charger Settings are not the same, charging efficiency is not the same. Mobile phones must support wireless charging to use wireless chargers.
5, therefore, if the maximum power of Huawei wireless charger is 40W, and the power of the charging head is 66W, it cannot achieve 40W fast charging, but may cause safety problems such as overheating of the charger. Select charger and charging headSelect the device based on the charging specifications and requirements to avoid potential damage or security risks to the device. If you have any questions or need more information, contact Huawei customer service or read the related technical documents.
6, otherwise it may lead to poor charging effect or even no charging. In addition, if the phone shell is relatively thick or with magnets and other items, it may also affect the charging effect, which needs attention. In short, Huawei HONOR 80 has wireless charging function, users only need to buy a wireless charger supporting Qi wireless charging standard, you can enjoy convenient wireless charging service. with