1, *74*97mm Xiaomi car wireless charger round head. It is 112*74*97mmYes. Xiaomi wireless car charger is an infrared induction wireless car charger product, with induction expansion, one-hand operation automatic locking, dual intelligent heat dissipation and other characteristics.
2, this depends on the maximum wireless charging power. For example, Xiaomi's 20W wireless charge, the default distribution is 27W charging head. Of course, this is the best configuration, low play can not play wireless power, high waste. The charging head is higher than the wireless charging power, because the conversion process has energy loss.
3, a separate 20W Xiaomi wireless charger package is no charging head and data cable, just a wireless chargerAnd a simple guide to getting started. Appearance The appearance of the wireless charger, a very simple circular design, round and textured, its silicone material is very soft and comfortable. It weighs 138 grams, and it feels very full when you weigh it in your hand.
4, to this MDY-08-EV and MDY-11-EM, are representative of the charger model, for example, MDY-08-EV original charger DC output: 5V/2A. The MDY-11-EM charger DC output is: 5V/3A, 9V/23A, 12V/67A, 10V/25A. Therefore, these two different models of chargers, the parameters are also different.
5, c port. The c port uses a data connector that is not positive or negative, and the Xiaomi 100w wireless charging head takes a way that is not positive or negative, and the mobile phone wireless charging port can be inserted into the mobile phone within 10 meters.
6, it uses dual-mode compatibility, support 5W/5W/10W three charging modes, can meet the charging needs of different mobile phones. At the same time, it also has the protection function, which can effectively prevent overcharge, overcurrent, overheating and other safety problems. Xiaomi wireless car chargerIn the appropriate position of the cab, connect the data cable connector of the wireless charger to the cigarette lighter interface of the car, and connect the other end to the wireless charger. After fixing the wireless charger, ensure that the wireless charger will not slip, and the wireless charger can be used normally.
How to wireless charging the car wireless charging How to use the car wireless charging method is: the car wireless charging is fixed in the appropriate position in the cab; Connect one end of the USB data cable of the wireless charger to the car cigarette port and the other end to the wireless charger; After fixing the position of the wireless charger, make sure that it is stable and will not slide, put the phone onCharge up.
Steps to use wireless charging on the car: First, fix the wireless charger on the car in the appropriate position in the cab. Next, connect one end of the USB data cable of the wireless charger to the car cigarette port and the other end to the wireless charger. Finally, fix the position of the wireless charger to ensure that it is stable and will not slide, and then put the phone on the wireless charger to start charging.
First of all, fix the car wireless charger in the appropriate location in the cab to ensure that it is stable and easy to use. Then, plug one end of the USB data cable of the wireless charger into the cigarette port of the car and connect the other endConnect to wireless charger. Then, adjust the position of the wireless charger to ensure that it is firm and does not slide. Finally, place the phone on a wireless charger to start charging.
1, reverse your previous installation steps can be removed. Loosen the plastic nut, put the round head of the support rod into the nut, and press it tightly, and then tighten the plastic nut, and the assembly is complete. Open the two adhesive surface stickers on the support, choose to fix on the car surface, and press hardA few minutes. The choice of car wireless charging bracket should not block the front car glass line of sight, and can not be too close to the outside, so as to avoid long-term sun exposure to affect its adhesion.
2, first of all, you need to prepare some tools to turn off the ignition switch of the car, so as not to short circuit or cause other safety problems. Second, you need to remove the shell of the car charger, after removing the shell, you can access the internal structure of the car charger, according to the need, you can clean or replace the internal circuit board, capacitors, resistors and other parts, be careful when disassembling, do not damage any parts.
3. BexThe ai car bracket has a built-in wireless charging function, which needs to be charged, and also supports wireless charging of up to 10W, and is compatible with all QI protocol wireless charging mobile phones on the market. Baseus (BaseUS) is a new life digital brand of Shenzhen BaseUS Technology Co., LTD., which integrates research and development, design, production and sales. The brand takes meeting user needs as the core, creating practical and beautiful products, doing its duty for users, and adding a sense of gain for users.
4, in addition to the convenient wire-free magnetic wireless charging, the side of the housing is also integrated with USB-C bidirectional fast charging interface, which can be used when the device has a fast recharge demandCable gets up to 20W PD fast charge. When the iPhone 13 uses the port, it can be charged to 50% in as little as 30 minutes.
5, Baseus charging speed is very satisfied, need to improve the unlock touch key, should be placed on the left, because the mobile phone is basically placed on the right side of the main driver, with the right hand to operate the mobile phone is easy to touch by mistake, put the left side can be perfectly solved. PHILIPS car off the key can also be induction open, this function is practical, parking and pulling the key can also be electric opening and closing, it is estimated that there is a built-in battery, charging speed may be charged by the headThe reason is not fast charging.
6, if it is a low wattage of high wattage charging, it will charge slowly, not his own charging fast, high wattage of low wattage charging can cause harm to the battery.
1, fixed wireless charger. The owner needs to buy a suitable wireless charger equipment, and then fix the wireless charger on the vehicle, and the fixed position should be convenient for the owner to take. Connect the cigarette lighter. Connect one end of the USB data cable of the wireless charging device to the wireless chargerThe other end is connected to the car cigarette lighter interface. Put it in your phone. Put your phone in a wireless charger and it will start charging.
2, first of all, the car wireless charger fixed to the appropriate position in the cab, the wireless charger data cable connector connected to the car's cigarette lighter interface, the other end is connected to the wireless charger, fixed after the wireless charger, ensure that the wireless charger will not slip, the wireless charger can be used normally.
3, the car wireless charging use steps: First of all, the car wireless charger fixed in the appropriate position in the cab. Next, will wireless chargerOne end of the USB data cable is connected to the car cigarette light, and the other end is connected to the wireless charger. Finally, fix the position of the wireless charger to ensure that it is stable and will not slide, and then put the phone on the wireless charger to start charging.
4, first of all, fix the car wireless charger in the appropriate position in the cab to ensure that it is stable and easy to use. Then, plug one end of the USB data cable of the wireless charger into the cigarette port of the car, and connect the other end to the wireless charger. Then, adjust the position of the wireless charger to ensure that it is firm and does not slide. Finally, place the phone on the wireless charger to start chargingElectricity.
5, in order to achieve wireless charging in the car, you need to fix the car wireless charger in the appropriate position in the cab, and then connect the USB data cable to the car cigarette port and wireless charger. After ensuring that the wireless charger is securely located, simply place the phone on it to start charging. The use of the car wireless charger is very convenient, the owner can charge the mobile phone at the same time during the driving process, no longer have to worry about the lack of mobile phone power.
6. Connect the data cable connector of the wireless charger to the cigarette lighter interface of the car 2. Then connect the other end to the wireless charger 3 and finally fix itAfter the wire charger, ensure that the wireless charger will not slip off and can be used normally.