1, the mobile phone calls vibration, the mobile phone position may change, resulting in the wireless charger stop charging, it is recommended to turn off the mobile phone vibration function when wireless charging. If the above methods do not solve the problem, please back up the phone data in advance, and bring the wireless charger, wired charger set and purchase voucher to vivo customer service center for testing.
2. Vertically place the mobile phone on the wireless charger to charge: Please place the wireless charging pad on the tray of the wireless charger first11 Wireless charging can not be used generally for the following reasons: wireless charging does not charge the mobile phone Wireless charging does not charge the mobile phone : The mobile phone protection case is too thick Wireless charging does not charge the mobile phone , it is recommended to choose a thin mobile phone protection case or do not use it when using wireless charging. The phone is not aligned with the charging area of the wireless charger. It is recommended to check the wireless charging area determined by the wireless charger specification.
Cause: The system program has a problem, resulting in hard charging functionIf the device is abnormal, it is recommended to restore the phone to normal use. The reason why the short circuit causes the Apple phone to be charged is probably caused by the short circuit of the charging interface, and there are a large number of spring firing pins in the charging interface of the phone, which can make the line closely connected to the plug of the charging data cable.
Take iOS11 system as an example, Apple 11 wireless charging is not charged because there is a problem with the system program, resulting in abnormal charging function hardware, it is recommended to restore the phone to normal use. The iphone11 is a mobile phone released by Apple Inc., which was released on September 11, 2019. iThe phone11 is designed in anodized aluminum and glass with an A13 Bionic chip, and the ultra-wide-angle camera supports 2x optical zoom.
The reasons for iphone11 wireless charging failure are as follows: It may be that the mobile phone protection case is too thick, it is recommended to choose a thin mobile phone protection case or not use when using wireless charging. It may be that the phone is not aligned with the charging area of the wireless charger, it is recommended to check the wireless charger specification to determine the wireless charging area. It may be that the wireless charger is not suitable for the wireless charging system of the mobile phone, so it is recommended to use the charger that meets the wireless charging requirements of the mobile phone.
Apple 11 wireless charging does not respond may be a problem with the system, need to restore the system Settings.
Too thick mobile phone case will affect the induction between the charging coil and the wireless charger in the mobile phone, resulting in normal charging. Therefore, it is recommended to remove the protective shell of the mobile phone and then use the wireless charger to charge Wireless charge to the mobile phone can not be charged ; The charging coil area in the mobile phone is small, and if the mobile phone is placed incorrectly when wireless charging is used, it will also lead to normal charging.
There is a problem with the charger or charging cable, there is a problem with the phone battery. Faulty charger or charging cable: Make sure you are using an Apple certified charger and charging cable and check for damage or wear. Mobile phone battery problems: Mobile phone battery has been aging or damaged, will also cause wireless charging can not work properly, the battery needs to be replaced.
Short circuit causes the Apple mobile phone not to be charged, may be caused by the short circuit of the charging interface, there are a lot of spring firing pins in the charging interface, these firing pins can make the line and the plug of the charging data line tightClose together. But if these firing pins are bent, it will cause a short circuit and the phone will not be able to charge.
The reasons for the failure of the Apple 15 wireless charging may be as follows: The device is not aligned with the charger. If the device is not properly placed in the center of the charger, or there is a physical barrier, it may cause charging failure. The charger is not connected to power. Make sure the wireless charger is plugged into the power adapter and connected to the power supply. The power adapter is faulty. If the power adapter fails, it may affect the work of the wireless charger.
The iPhone can't be chargedIt may be the reason of the charging interface, it is necessary to check whether the charging interface is abnormal, it may also be the charging source or the data cable is damaged, you can use other charging equipment to try, the temperature is too low may also lead to charging failure, you can put the phone in a warm place to charge, or send the phone to Apple authorized service for detection and repair.
Because some mobile phone protective cover is too thick, or the material of the mobile phone protective cover may affect the identification function of the mobile phone wireless charger, it is recommended that you take your handTry again after the machine protective case. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
When there are inclusions between the mobile phone and the wireless charging board, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally. Connect your phone directly to the wired charger to see if it worksCharge up.
Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
Non-Huawei wireless chargers may be incompatible with mobile phones, resulting in abnormal wireless charging function.
Apple 15 wireless charging NoThe reasons may be as follows: The device is not aligned with the charger. If the device is not properly placed in the center of the charger, or there is a physical barrier, it may cause charging failure. The charger is not connected to power. Make sure the wireless charger is plugged into the power adapter and connected to the power supply. The power adapter is faulty. If the power adapter fails, it may affect the work of the wireless charger.
1, the charger has a problem. If the above two feelingsThe situation is not a problem, then it may be that the charger itself appears wireless charge to the phone does not charge The problem, need to be replaced or repaired. If you encounter the situation that the millet wireless charger light has been flashing, you can first try to adjust the distance between the charger and the phone, or check whether the interface is loose. If the problem still exists, it is recommended to contact Xiaomi customer service or go to a professional electronic repair shop for repair.
2, finally, if the above methods are ineffective, you may need to consider replacing the charger or contacting Xiaomi customer service for further support and solutions. To better understandFor this problem, we can consider a practical example. Suppose a user places his Xiaomi phone on a Xiaomi wireless charger to charge it, but finds that the green light starts flashing.
3, this is mostly because the user will run out of power, the phone automatically shut down caused by. The solution to this situation is wireless charge to the phone is not charged : remove the battery, wait for 5 minutes, and then reinstall the battery, and then connect the charger to charge, 30 minutes later, and then restart. Whether the phone uses a regular original Xiaomi charger. If you are using other chargesElectrical appliances, you need to check whether there is a problem with the charger, or the charger interface is damaged.
4, should check the charger itself has no problem, the problem is more serious, need to contact the after-sales service for repair or replacement. Charger and mobile phone do not match Wireless charge to the mobile phone does not charge : Some chargers only support a specific model of mobile phone wireless charging, the user uses an incompatible mobile phone to charge, there will be no charging situation. Therefore, you should understand the compatibility of the charger before buying.
5, at this time should pay attention to whether there is a metal objectPut it on the wireless charger, please take it off and charge it again. The power will be off for a while, this is not placed in the right position, detected metal foreign objects, automatic protection Settings. Make sure you use the official charging head. Second, look carefully at the wireless charging instructions, encounter a metal foreign body near, it will automatically cut off wireless charging, and continue to flash the green light, and return to normal after power off.
6, you want to ask is millet wireless charger flashing green light does not charge what reason? The phone is not in the center of the wireless charger. The phone case is too thick, which causes the wireless charging to be blocked. The wireless charger is in poor contact, resulting in failure to perform normal wireless chargingElectrical operation.
1, possible problems or anomalies: However, the green light flashing may also indicate that some problems or anomalies have been encountered during the charging process. For example, if the connection between the charger and the device is poor, or if there is a charging problem with the device itself, the green light may flash to alert the user. In addition, if the power supply of the charger is unstable or there are other faults, it may also cause the green light to blink.
2, the theme is to ask millet 10 handsWhat is the reason why wireless charging can not be used after upgrading miui14? Here's why. According to the query of Xiaomi information, there is no corresponding wireless charging driver updated from the old version, or because the millet mobile phone is not equipped with wireless charging function, resulting in wireless charging cannot be used in the upgrade process.
3, if the problem still exists, please check whether the phone charging interface is loose or damaged, if there is a problem, you need to send the phone to repair. Try using a computer or power bank to charge. Sometimes, the phone's battery may go to sleep because it runs out of power, in which case, just use the charger orCharge the phone for a period of time, and the battery may regain its function.
4, millet mobile phone charging may have the following reasons: charger and USB cable failure. You can try replacing the charging cable and charger, making sure to use the original charger and charging cable or reliable quality. The USB port is dusty or damaged. Clean the interface with a small brush or air dryer (set to cold air) and inspect the interface for damage. The battery is aging. Try replacing the battery or getting your phone repaired. Software problem.
5, Mi 10 changed the tail plug without wireless charging can be replaced with other noneWire charging base for charging. Locate the fault for the mobile phone or the wireless charger fault, non-millet wireless charger may be incompatible with the mobile phone, resulting in abnormal wireless charging function, must use millet official wireless charger for wireless charging.