First check whether the charger is original, the output current and voltage are no problem. 2. Check whether the charging data cable is original, whether the interface is well connected, and whether the data cable is damaged. 3, if it still doesn't work, try replacing the battery. 4. If none of the above is effective,That is, the charging board has a problem, it is recommended to send to the official after-sales service center, and the engineer will help check and deal with it.
Mi MIx2s will not be powered off when fully charged. After full charge, the battery power remains at 100%, the charging breath light is not on, the battery icon in the status bar is green, and there is a lightning mark for charging. However, the system will know that it is converted to trickle charging mode, which does no harm to the phone.
When the LED light status is green and blinking, the wireless charger is in the error and protection stage, at this time, you should pay attention to whether there is a metal object placed on the wireless charger, and observe whether it can be used normally after removing it.
If the reason for excluding the charger (you can change the charger) or the reason for the charging cable (change the charging cable) can not be charged normally. It is likely that the cable charging interface is broken, and the wireless charging can be charged, and the power management chip should be normal.
However, wireless charging also has disadvantages. Due to the use of electromagnetic induction technology, wireless charging is relatively less efficient, which means that the amount of power charged in the same time may be less than that of wired charging. In addition, since wireless charging requires the use of a relatively close distance between the transmitter and the receiver, it will be affected by environmental factors, if the environment is too closeNoisy, may also affect the effect of wireless charging.
2, watt wireless charge to Mi 11 charge only 30Here's why. The mobile phone does not support 55w fast charging, which shows that the charging speed of your mobile phone is 30w.
3, the reason for the slow charging of Mi 12Pro provides users with two charging modes. New 120W surging secondary charging technology. Two-speed mode, faster and more stable. Low temperature mode, the temperature is only 37℃, the body temperature is also comfortable.
Confirm that the original charger is used. Whether the phone itself supports wireless chargingIf the mobile phone itself does not support wireless charging Xiaomi wireless charging is not fast charging , it is useless to take what wireless charger Xiaomi wireless charging is not fast charging ! Make sure to use the original charger. Turn on the fast charging switch of the phone. Check whether the system has a new version and upgrade the system. If not, please back up important data (contacts, SMS, photos, etc.) and try to restore factory Settings.
When the temperature is too high, the charging power will automatically decrease. Millet 11 all Millet wireless charging is not fast charging Must use the mobile phone original wireless charging can be faster. Mobile phone Millet wireless charging is not fast charging charging effect depends on the charger, but also related to the charging cable and the mobile phoneJoin. In terms of chargers, the general charger will have a built-in smart chip, which can identify the current and voltage required to charge the phone, and then adjust the current and voltage within the safe range of the phone. Mobile phone Settings "Click power saving and battery Settings". On the Power saving and battery Settings screen, tap Fast Acceleration. Quick acceleration Click the dot behind the "Default use fast charge acceleration", and the dot turns blue, indicating that the Xiaomi phone has successfully restored the fast charge function. Xiaomi fast charging technology Xiaomi's fast charging technology is called Super Charge Turbo, the highest cable supportedThe charging power is 120W of the Mi 12 Pro. 1, then it is very likely that the charging mode is not compatible. That is to say, the device that you use for wireless charging Xiaomi wireless charging is not fast charging Xiaomi wireless charging is not fast charging Millet 80w wireless charging has been flashing, can not charge what situation?
2, the distance between the charger and the phone is too far. Xiaomi wireless charger needs to fit with the mobile phone to charge normally Xiaomi wireless charger is not fast charging , if the distance is too far Xiaomi wireless charger is not fast charging , the light will always flash. The charger port is loose. The interface of the wireless charger must be correctly inserted into the power socket, and if the interface is loose, the light will always flash. Charger appearsCheck whether the charger itself has a problem, if the problem is more serious, you need to contact the after-sales service for repair or replacement.
The distance between the charger and the mobile phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose. The interface of the wireless charger must be correctly inserted into the power socket, and if the interface is loose, the light will always flash. There is a problem with the charger.
Indicator that it is charging: When the green light on the Xiaomi wireless charger starts flashing, it usually means that the charger is charging the device. This is a markAccurate charging indication, indicating that the charger is properly connected and is transmitting power. Possible problems or anomalies: However, a flashing green light may also indicate that some problem or anomaly has been encountered during charging.
The reasons why the Mi 3 can not wireless charging may be: Wireless charging function is not turned on: Please confirm whether the phone supports wireless charging, and whether the wireless charging function has been turned on in the Settings. Charger problem: Please use a charger that can support wireless charging of your phone, such as Xiaomi's wireless charger. If the charger used is not compatible, it may also lead to wireless charging.
When the temperature is too high, the charging power will automatically decrease. All versions of Mi 11 charging temperature control is particularly strict, the temperature reached 36 degrees began to slow down 40%, normal to 9000ma, mobile phone temperature above 36 degrees is only about 5000 ma. The Mi 11Pro battery is equipped with a large battery capacity of 5000mAh, which supports 67W fast charging, 67W wireless charging, and 10W reverse charging.
is mandatoryMobile phone original wireless charging can be faster. The charging effect of the mobile phone depends on the charger, but also related to the charging cable and the mobile phone. In terms of chargers, the general charger will have a built-in smart chip, which can identify the current and voltage required to charge the phone, and then adjust the current and voltage within the safe range of the phone.
Confirm that the original charger is used. Does the mobile phone itself support wireless charging? If the mobile phone itself does not support wireless charging, it is useless to take what wireless charger! Make sure to use the original charger. Turn on the fast charging switch of the phone. Check whether the system has a new version, upgrade the system. If not, please back up important data (contacts, SMS, photos, etc.) and try to restore factory Settings.
Wireless charging has the requirement of the distance between the mobile phone and the wireless charging panel, so a very thick mobile phone protective case or back bracket will cause the distance to exceed the effective receiving range or "virtual charging" phenomenon. The thickness distance/charging Angle/metal barrier will have a great impact on the wireless charging experience.