Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contactRe-insert once. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
Make sure the phone is compatible with the wireless charger Wireless charging The phone is not charged : Make sure your phone supports wireless charging and that the wireless charger is compatible with your phone model. Different phone models may have different charging standards, so you must use a wireless charger that supports your phone model. Check the charger and power adapter: Make sure the wireless charger is positiveOften work, and connect the wireless charging mobile phone does not charge the appropriate power adapter, make sure that the power adapter plug is firmly inserted into the power outlet.
Check whether the wireless reverse charging switch has been turned on. The path to setting the mobile phone is as follows: Set the battery and turn on the wireless reverse charging switch. Check whether the battery of your mobile phone is above 20%. If the battery of the mobile phone is lower than 20%, charge the mobile phone using the charger first.
Please check that the phone is centered on the backWireless charging board center. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally.
1, check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Make sure the wireless charger indicator isNo It lights up normally. At the same time, check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. You are advised to reinsert it. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
2, because some mobile phone protective cover is too thick, or the material of the mobile phone protective cover may affect the recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective cover and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
3. The reasons are as follows: Click the button in the notification bar to enable wireless backcharging. The charged device needs to be placed in the correct position in the center of the rear cover. The device to be charged needs to support the standard Qi wireless charging protocol (for example, AppleWatch is a non-Qi wireless charging device, which cannot be charged through the wireless backcharging function). There should be no metal ornaments or foreign objects between the phone and the device being charged.
Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
Because some mobile phone protective cases are too thick, or the material of mobile phone protective cases is originalBecause it may affect the recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective case and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
Check the charger and power adapter: Make sure the wireless charger and power adapter you are using is compatible with the Mate 30. Sometimes, incompatible chargers may not work properly. It is recommended that you use original or certified chargers and adapters. Clean and inspect equipment: Check your MaWhether there is any dust, dirt or foreign objects on the te 30 and wireless charger. These substances may interfere with the normal operation of the wireless charging function.
Make sure your phone is compatible with your wireless charger: Make sure your phone supports wireless charging and that the wireless charger is compatible with your phone model. Different phone models may have different charging standards, so you must use a wireless charger that supports your phone model. Check the charger and power adapter: Make sure that the wireless charger is working properly and that the appropriate power adapter is connected, and that the power adapter is securely plugged into the power outlet.
1. Finally, if the above methods are ineffective, you may need to consider replacing the charger or contacting Xiaomi customer service for further support and solutions. To better understand the problem, we can consider a practical example. Suppose a user places his Xiaomi phone on a Xiaomi wireless charger to charge it, but finds that the green light starts flashing.
2, may be the location of the phone is not correct, you can adjust the position of the phone on the wireless charger; There may be a problem with the system of the phone, you can upgrade the system or restart the phone to use the wireless charger; Or it could be a cell phoneWire charging coil damaged, need to go to after-sales repair.
3, the charger has a problem. If the above two cases are not a problem, then there may be a problem with the charger itself and it needs to be replaced or repaired. If you encounter the situation that the millet wireless charger light has been flashing, you can first try to adjust the distance between the charger and the phone, or check whether the interface is loose. If the problem still exists, it is recommended to contact Xiaomi customer service or go to a professional electronic repair shop for repair.
4, at this time should pay attention to whether there is a metal object placed on the wireless charger, please take it off and charge again. Millet MIX3 standardEquipped with: mobile phone host * minimalist mobile phone protective case * Power adapter * Millet wireless charger *USB Type-C data cable *Type-C TO AUDIO conversion cable * Pin * three-pack certificate * Getting Started Guide *1.
5, first of all, we need to confirm whether our millet 11 supports wireless charging function. You can view this information in your phone's Settings. Enter "Settings" - "Battery and Performance" - "Wireless charging", if the "wireless charging" option appears, it indicates that the device supports wireless charging. After confirming that the device supports wireless charging, we need to allowGet a wireless charger that supports the Qi standard.