1, to choose the right charger. Because the general Bluetooth headset has a special charger, if there is no special charger, you can directly find the charging interface (some are thin and round holes, some are MiniUSB universal interface), and the rated output power is also the same charger to use.
< br >
2, the charging time of the general Bluetooth headset is kept within 2 hours, because the charging time is too long, it will directly lead to the aging or even burning of the machine circuit board, and there will be a variety of inexplicable machine failures, such as shortened standby time, frequent disconnection, shortened call distance, unable to turn on and other problems.
< br >
3, when charging to plug in all, do not only plug in more than half, such a long time of use will cause damage to the Bluetooth headset. Of course, when pulling the charging plug, the action should not be so large, otherwise, pulling the plug for a long time will cause the plug to loose.
< br >
4. When the Bluetooth headset is connected to the power supply and starts charging, the red indicator light on the Bluetooth headset is long and bright, indicating that it is charging. If the indicator turns blue after charging is completed, the charger can be removed.
< br >
5, when you want to charge the Bluetooth headset again, please make sure that the previous battery is used up and then replenish it.
< br >
6, if the Bluetooth headset plugged into the base or charging box charging, and directly to the Bluetooth headset charging, the charge after the completion of the charge will be more durable in the use of time. In addition, the charging method is the same as directly charging the Bluetooth headset, plug the charging cable into the hole of the base, and then turn on the power to charge normally.
< br >
7, Bluetooth headset charger after charging, remember to unplug from the plugboard, if a long time plugged into the power supply, will directly and seriously affect the life of the charger.
To connect the charging base wireless Bluetooth headset, perform the following steps
1. Enable the Bluetooth function of the mobile phone first.
2. Search for a Bluetooth headset.
3. Then long press the earphone start button for a few seconds, and the earphone will turn on and switch to the pairing state.
4. Then use the mobile phone to search for Bluetooth devices, enter the password of the headset, and complete the pairing operation.
5. Wait until the top of the phone shows a sign that the Bluetooth headset is connected.
1. Open the charging compartment, take out the earphones, and put the cover on the charging compartment. Use the matching charging cable to charge the charging bin, if there is no matching can be charged on the line, full. You can judge whether the charging is complete according to the instructions on the manual.
2. After the charging bin is completed, the headset can be charged in the charging bin, which is similar to a charging treasure. Of course, if you want to increase the battery life of the headset, you can also charge the headset and the charging bin together, the first step is to assume that the headset is full.
3, turn on the Bluetooth function of the mobile phone if the Bluetooth name of the headset is the same as other devices, other devices will be ignored.
4, according to the instructions described in the boot and according to the steps to pair it with the mobile phone, there are differences in different methods of headphones.
5, after the successful pairing, the different models of the indicator can be handled according to the situation described in the instructions, if the pairing is not successful, you need to operate again according to the instructions.
6, the above two headphones are connected together to use, of course, you can also use a single connection to the headset. Single earphone work can be connected separately.