Portable wifi can not be charged for the following reasons Wireless also can not be charged : charging line fault wireless alsoDo not charge into the power : If the portable WiFi wireless also does not charge into the power charging line failure wireless also does not charge into the power , you can not charge other devices. At this time, you need to check whether the charging line is damaged or poor contact, and if there is a problem, you need to replace the charging line. Insufficient battery capacity: portable WiFi wireless can not be charged battery capacity is limited, if the battery capacity is insufficient, it can not charge other devices.
Charger failure: Try to use the same specifications of the charger for charging, if it can be successfully charged, it is the original charger failure, to replace. Loose or damaged charging cable: Check that the charging cable is securely connected between the device and the power adapter. If the charging cable is loose or damaged, the current cannot be transmitted normally and the charge cannot be made. To replace a new charging cable, make sure the plug fits the connector tightly.
You can try to remove the battery first, see if the battery is removed, plug in to see if it can be used, if you can, it is the battery problem. If not, it's the equipment. If you are latticeToo thick, or the material of the mobile phone protective case, may affect the recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective case and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
2, check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
3, replace the wireless charger: When our mobile phone appears in such a situation, it is likely that we have a problem with the charger, at this time we can replace a wireless charger to try (original wireless charger or usb data cable) restore factory Settings: If after the boot, the fault is still, at this time we can restore the phone to factory Settings to try.
4, determine the mobile phone and wireless chargerYung: Make sure your phone supports wireless charging and that the wireless charger is compatible with your phone model. Different phone models may have different charging standards, so you must use a wireless charger that supports your phone model. Check the charger and power adapter: Make sure that the wireless charger is working properly and that the appropriate power adapter is connected, and that the power adapter is securely plugged into the power outlet.
1, charger problem: please use to support your mobile phoneWireless charging charger, such as millet wireless charger. If the charger used is not compatible, it may also lead to wireless charging. Device overheating: If the temperature of the phone is too high, it may cause the wireless charging function to fail. Please put the phone in a cool and ventilated place, and try wireless charging after the phone temperature drops.
2, you want to ask is millet wireless charger flashing green light does not charge what reason? The phone is not in the center of the wireless charger. The phone case is too thick, which causes the wireless charging to be blocked. The wireless charger is in poor contact, resulting in the failure to perform normal wireless charging operations.
3, chargeThere are problems with the electrical appliance itself: the power cord of the charger is loose, the charging seat is damaged, the charging light is not up, etc., which will cause the charger to not work normally. Should check the charger itself has no problem, the problem is more serious, need to contact the after-sales service for repair or replacement.
4, can be fixed in the air conditioning outlet to use, I use the wireless charge on the navigation, basically are fully charged.
5, the distance between the charger and the phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose. Millet milletThe connector of the cable charger must be properly plugged into the power outlet, and if the connector is loose, the light will always flash. There is a problem with the charger.
1, the charging position is not correct Check whether the phone is facing the center of the wireless charging board, if not, it may lead to failure to charge. If there are obstacles between the charging pad and the phone, such as keys, coins, etc., it will affect the charging effect and they need to be removed. The phone case is too thickThe thick protective case may affect the charging effect, try to take down the phone case and then charge.
2, shutdown charging test. Replace the charging position and eliminate the intermittent failure caused by poor socket contact. If conditions permit, replace the standby charger for testing. Or send the repair test to boot charging, such as the mobile phone is equipped with a third-party plug-in such as charging doctor, it is recommended to uninstall the test.
3, finger or screen whether there is liquid or stains finger or screen liquid or stains will affect the sensitivity of the touch screen, it is recommended to clean with a clean dry cloth before trying. Check if a non-original film is used, may affect the touch screen effect, it is recommended that you remove the film to try or go to the customer service center to re-apply the film.
4. If the touch screen of a Huawei mobile phone jumps or touches automatically, perform the following operations: 1. If random jumping or ghost hands occur when you use a third-party charging device or a fixed place to charge, it may be caused by unstable power supply voltage. You are advised to replace the Huawei charger or charge the device in another place (replace the power supply).
Possible problems or anomalies: However, a flashing green light may also indicate that some problems or anomalies have been encountered during charging. For example, if the connection between the charger and the device is poor, or if there is a charging problem with the device itself, the green light may flash to alert the user. In addition, if the power supply of the charger is unstable or there are other faults, it may also cause the green light to blink.
The theme is to ask what is the reason why wireless charging can not be used after the millet 10 mobile phone upgrade miui14? Here's why. According to the query of small shrimp rice information, there is no update from the old versionThe corresponding wireless charging drive, or because the millet mobile phone is not equipped with wireless charging function, resulting in wireless charging cannot be used in the upgrade process.
Mobile phone protection case is too thick: When the mobile phone protection case is too thick, it will affect the wireless charging of the mobile phone. Therefore, we can take off the mobile phone protective shell and then charge it. Motherboard failure: After the above operation, if the fault is still the same, then we can best take the mobile phone to the mobile phone repair shop for warranty treatment or maintenance, must not be in the case of no experience, randomly disassemble the machine, to avoid unnecessary losses.
The battery is lowAutomatic shutdown, the battery will go to sleep. Please remove the battery, after five minutes (m 3 because you can not remove the battery, please ignore this.) Connect the charger and charge it for more than half an hour. Please connect the charger for charging. During this process, the mobile phone led may not be bright initially, after a few minutes, the red light of the led begins to blink and become faster and faster, and when the red light is no longer blinking, it can be turned on.
May be out of power, the protection status is blinking. 20W millet wireless charger packaging or the past millet has always been simple white packaging, the front of the package in addition to the appearance of a wireless charge, onThere is no other introduction. There is almost no content in the package, only the name of the product on the side of the package: Millet wireless charger.
Mi 10 changed the tail plug without wireless charging can be replaced with other wireless charging base for charging. Locate the fault for the mobile phone or the wireless charger fault, non-millet wireless charger may be incompatible with the mobile phone, resulting in abnormal wireless charging function, must use millet official wireless charger for wireless charging.