1, if the abnormal tire pressure indicator light is on Baojun 560 wireless car charger , it indicates that one or more tire inflation is obviously insufficient. At this time Baojun 560 wireless car charger , should stop as soon as possible Baojun 560 wireless car charger , check the tire pressure and inflate the tire to the correct pressure value. When driving with tires with significantly insufficient inflation pressure Baojun 560 wireless car charger , can cause tires to overheat and cause tire failure. In addition, underinflation can reduce fuel economy, shorten tread life, and may affect vehicle handling and braking performance. 2, therefore, Baojun 560 tire pressure is only 6 bar is not normal, the owner needs to adjust the tire pressure according to the actual condition of the vehicle, such as load, season and other factors, to ensure driving performance and safety.
3, hello, if the spare tire is not full size, there will be such a lack of display.
4, Baojun 560 equipped with Baojun 560 wireless car charger tire pressure monitoring system, this system can be displayed in the dashboard LCD display. The driver simply turns a knob on the dashboard to switch to the tire pressure monitoring system's display page, which displays the air pressure of each tire in the car. This system can automatically monitor the tire pressure in real time, and alarm the tire leak and low pressure to ensure driving safety.
5. Tire pressure sensor is damaged. Tire pressure sensors are used to monitor tire pressure and are mounted directly inside the tire, with tire inflationng> Baojun 560 wireless car charger , wireless receiver installed in the car. When the battery is sufficient, the remote control key works within a few meters of operation Baojun 560 wireless car charger , but if there is an obstacle between the car and the remote control key or in bad weather conditions or when the battery is insufficient, its scope of action will be reduced.
2, under the main driving door. Baojun 560, is SAIC-GM-Wuling officially launched its first SUV model, launched on July 18, 2015, a total of 8L manual comfort, 8LManual elite model, 8L manual luxury model 3 models. The key sensing area is under the main driver's door, and the Baojun 560 key sensing area is 5 meters away from the nearest door.
3, the key sensing area of Baojun 560 is located in the ignition switch position. The remote transmitter is located in the remote key, the battery is also integrated in it, and the wireless receiver is installed in the car. Smart key system is the device used in most cars on the market today, also known as keyless entry mode. The remote control and transmitter are generally integrated on the electronic key, which is used to sense the vehicle start, and turn the vehicle off or on through the electronic key.
4. Position of the ignition switch. Baojun 560 is the first SUV model officially launched by SAIC-GM-Wuling. According to the relevant information, Baojun 560 wireless car charger : the key sensing area of the car is in the position of the ignition switch, and the key is placed in this position, and the induction will occur.
Baojun 560 tire pressure sensor matching method: first turn on the power, and then pop up an English descriptionPage, then select maintenance Baojun 560, and then enter the main page, move the arrow cursor to 2, press Enter to enter the next step. At this point, you can enter the page that reads the tire pressure data, return to the main menu, connect the OBD of the car with the wire of the device, and write the data on the special device to the on-board computer.
The tire pressure sensor needs to be rematched after the battery is changed. Matching method: When the tire pressure display of the driving computer does not match the actual tire pressure data, the tire pressure re-learning method can be carried out, and the tire pressure monitoring re-learning method. In the vehicle ignition state, turn the left steering wheel lever, select and enter the tire pressure display bar.
Hello, in this case, we must first adjust the pressure of the four tires. Then use the decoder to reset, if there is no decoding form, a section of kilometers will automatically reset, I hope my answer can help you, hope to adopt.
Tire pressure monitoring system is either automatic matching or manual matching, tire pressure monitoring if you need to re-match, it is recommended to go to the 4s shop to check, because the safety of the tire is very important. Tire pressure monitoring rematching requires professional equipment, so only to go to the 4s shop to find professional maintenance personnel for pairing, generally common tire pressure monitoring is divided into three kinds, pointsThere are three types: built-in type, external type and OBD.
Long press the menu key above the car display for more than 5 seconds, you can begin to match, start from the left front wheel, the display screen will display the pressure value of the left front wheel tire, and then continue to press the menu key that the position is successfully paired, and so on. The specific steps of tire pressure monitoring re-pairing: The tire pressure monitoring pairing can be paired one by one according to the default sequence set, that is, left front, right front, right back and left back.