If the phone can not be charged Samsung wireless charge unchanged , please try Samsung wireless charge unchanged : Use the original charger and data cable to connect the power to charge. For mobile phones with removable batteries, you can shut down and remove the battery, use a cotton swab to clean the battery contact and try the phone charging interface. If the above method does not solve the problem, please bring the purchase invoice, repair card and machine deliveryCheck at Samsung Service center.
Hello: According to your description, it is recommended that you try the following operations: Shutdown charging test. Replace the charging position and eliminate the intermittent failure caused by poor socket contact. If conditions permit, replace the standby charger for testing. Or send the repair test to boot charging, such as the mobile phone is equipped with a third-party plug-in such as charging doctor, it is recommended to uninstall the test.
For non-original charger, it is easy to charge no power, because the charger specifications are not up to standard, replace a qualified charger. Please check whether the data cable is normal. Data cable looks normal on the outside, inside may bePoint of contact. Reinstall the battery and try charging it again. 2) If possible, replace the battery or use a charger to try charging.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
Based on your description, it is recommended that you: restart the handMachine try. If the problem persists, it is recommended that you take the repair card, purchase invoice and mobile phone to the nearest Samsung mobile phone customer service test.
1, shutdown charging test. Replace the charging position and eliminate the intermittently caused by poor contact of the socket. If conditions allow to replace the standby charger for testing or repair testing, it is recommended to test after uninstallation when charging, such as the mobile phone is equipped with a third-party plug-in such as a charging doctor.
2. When there are inclusions between the mobile phone and the wireless charging board, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally. Connect your phone directly to the wired charger to see if it can be charged.
3, use the original charger to connect to the home power supply. Replace the power socket Try or replace a data cable with a charger to charge. If the phone can be turned on normally, it is recommended to back up the phoneTo restore data (such as contacts and multimedia files), restore the phone to factory Settings. If the problem still exists according to the above methods, please bring the purchase invoice, repair card and machine to the nearest service center for inspection.
Use the original charger and data cable to connect to the power supply. For mobile phones with removable Samsung wireless charging battery, you can shut down and remove the battery, use a cotton swab to clean the battery contact and try the phone charging interface. If the above method is not solvedTo solve the problem, please bring the purchase invoice, repair card and machine to Samsung service center for inspection.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
Use the original charger to connect to the home power supply. Replace electrical outlet try or moreChange a data cable to connect the charger to charge. If the phone can be turned on normally, you are advised to back up data (such as contacts and multimedia files) on the phone and restore the phone to factory Settings. If the problem still exists according to the above methods, please bring the purchase invoice, repair card and machine to the nearest service center for inspection.
Wireless charging base plug wired charger power supply, mobile phone put on automatic charging Samsung wireless charge unchanged . Wireless base put on the phone did not respond, pick up the phone, wireless base pull out the charging cable, and then plug in the charging cable, and then put onMobile phones can be Samsung wireless charge unchanged . If there is no response to wireless charging, plug the charging cable into the phone, and there is no need for the wireless charging base. Charging time 2 hours, input power below 15W.
Check that the phone is facing the center of the wireless charging pad, if not, it may cause a failure to charge. If there are obstacles between the charging pad and the phone, such as keys, coins, etc., it will affect the charging effect and they need to be removed. The phone case is too thick thick protective case may affect the charging effect, try to take down the phone caseCharge it again.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
Shutdown charging test. Replace the charging position and eliminate the intermittent failure caused by poor socket contact. If conditions permit, replace the standby charger for testing. Or send the repair test to boot charging, such as the mobile phone is equipped with a third-party plug-in such as charging doctor, it is recommended to uninstall the test.
Samsung S6 wireless charger, must be placed accurately, because the use of QI technology, the transmitter coil and the receiving coil are relatively small, not almost only 1/3 of the size of the phone, so a slight mismatch, you can not charge. It is also for this reason that Samsung's wireless charging mobile phone, or other similar QI noLine charger, did not spread.
The main reasons for the S6's inability to fast charge are as follows: Poor connection for non-original chargers and data cables that do not open the fast charge option software version that causes the hardware failure of the phone itself. You can perform the following operations to try to fast charge: Confirm whether the charging cable and the charging head are plugged in to the end, if not fully inserted, the fast charging effect cannot be achieved. Check whether the original charger and charging cable are used.
Samsung s6 can not be charged, please first confirm whether the machine in the case of low ambient temperature, in order to improve the durability of the batteryIn low temperature environments, charging may be limited, which is a normal phenomenon. It is recommended to charge the machine in a warm environment (recommended ambient temperature: 15℃-35℃). If it still cannot be charged normally, it is recommended to use the original charger to connect to the home power supply to charge.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, you canCan not charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
Shutdown charging test. Replace the charging position and eliminate the intermittent failure caused by poor socket contact. If conditions permit, replace the standby charger for testing. Or send the repair test to boot charging, such as the mobile phone is equipped with a third-party plug-in such as charging doctor, it is recommended to uninstall the test.
Check whetherOriginal charger, charging cable. If not, please replace the original parts. Manually turn on the fast charging switch: Settings - Battery - Fast Wired charging - Slide On (or Settings - Power saving - Fast Charging on). Turn off the device or its screen while charging. Check whether the mobile phone system has a new version and upgrade the system.
It is recommended that you try the following methods: Use the original charger to connect to the home power supply to charge. Replace the power socket Try or replace a data cable with a charger to charge. For mobile phones with removable batteries, you can also try: 1) It is recommended to shut down and remove the battery, use a cotton swab to clean the battery contacts andThe contact point where the phone connects to the battery. Reinstall the battery and try charging it again. 2) If possible, replace the battery or use a charger to try charging.
It is recommended that you try the following methods: Use the original charger to connect to the home power supply to charge. Replace the power socket Try or replace a data cable with a charger to charge. If the phone can be turned on normally, you are advised to back up data (such as contacts and multimedia files) on the phone and restore the phone to factory Settings. If the problem still exists according to the above methods, please bring the purchase invoice, repair card and machine to the Samsung service center for inspection.